Andrew Tridgell
|
1d2d8c903a
|
Rover: make preflight calibration follow plane conventions
|
2014-11-21 14:47:09 +11:00 |
Andrew Tridgell
|
1ed02441a0
|
Rover: fix build with new mavlink repo
|
2014-11-18 11:19:53 +11:00 |
Randy Mackay
|
48c00728a7
|
Rover: add MOUNT_STATUS to STREAM_EXTRA3
|
2014-11-17 15:59:38 -08:00 |
Grant Morphett
|
699de81d02
|
Rover: Prepare for 2.47 release.
|
2014-11-15 14:24:07 +11:00 |
Grant Morphett
|
88fd9a2879
|
Rover: Update release notes ready for 2.47 release.
|
2014-11-15 14:24:05 +11:00 |
Grant
|
3831a0ed3e
|
Rover: Fix INS test in CLI to quit on enter
The curly brace was in the wrong spot.
|
2014-11-15 13:37:52 +11:00 |
Andrew Tridgell
|
ef62a2c697
|
Rover: fixed CLI sonartest
|
2014-11-11 11:33:51 +11:00 |
Andrew Tridgell
|
35b558cfc2
|
Rover: convert to new AP_InertialSensor API
|
2014-10-24 12:10:38 +11:00 |
Randy Mackay
|
08f8fdfabd
|
Rover: report gyro unhealthy if failed calibration
|
2014-10-09 10:00:19 +09:00 |
Andrew Tridgell
|
49fa887773
|
Rover: prepare 2.47beta1
|
2014-10-09 09:20:11 +11:00 |
Andrew Tridgell
|
1721216019
|
Rover: fixed skid steering
the main issue was the use of the last throttle in the throttle slew
rate control, but manual skid steering was also broken
|
2014-10-09 08:59:26 +11:00 |
Randy Mackay
|
799f559c1d
|
Rover: only report ahrs unhealthy after initialisation
|
2014-10-02 14:41:27 +09:00 |
Andrew Tridgell
|
9453154b75
|
Rover: use handle_set_mode()
|
2014-10-01 14:19:42 +10:00 |
Randy Mackay
|
a860d91930
|
Rover: allow GCS to turn safety switch on/off
|
2014-10-01 13:12:08 +10:00 |
Randy Mackay
|
bab2c17e11
|
Rover: set sys_status motor outputs bit from safety switch
|
2014-10-01 13:11:50 +10:00 |
Randy Mackay
|
2dbfc6158d
|
Rover: check target of set-mode request from GCS
Issue discovered and fix contributed by Deadolous
|
2014-09-30 15:19:28 +10:00 |
Randy Mackay
|
9de1ae8fbb
|
Rover: individual accel and gyro status to GCS
|
2014-09-03 11:22:55 +09:00 |
Andrew Tridgell
|
3d8f1e03e1
|
Rover: prepare for 2.46 release
|
2014-08-26 07:48:55 +10:00 |
Andrew Tridgell
|
87f0cb6168
|
Rover: remove unused variable
|
2014-08-22 21:13:11 +10:00 |
Andrew Tridgell
|
7cda392827
|
Rover: show firmware version on param list
|
2014-08-22 21:13:11 +10:00 |
Andrew Tridgell
|
06c77c167e
|
Rover: set GPS non-blocking
the new GPS driver only ever needs a non-blocking port
|
2014-08-19 10:08:17 +10:00 |
Randy Mackay
|
d130f0c499
|
Revert "Rover: use rcmap when sending radio_in to GCS"
This reverts commit fb867f3a06 .
|
2014-08-16 20:31:29 +09:00 |
Randy Mackay
|
fb867f3a06
|
Rover: use rcmap when sending radio_in to GCS
|
2014-08-16 15:28:01 +09:00 |
Andrew Tridgell
|
c150338e53
|
Rover: convert to using StorageManager
|
2014-08-13 18:46:44 +10:00 |
Andrew Tridgell
|
0588d88435
|
Rover: fixed build
|
2014-08-06 17:59:20 +10:00 |
Andrew Tridgell
|
30b9c60938
|
Rover: rename Tele2Protocol to Serial2Protocol
|
2014-07-30 14:48:41 +10:00 |
Matthias Badaire
|
874ef65d74
|
Plane: Add SERIAL2_PROTOCOL for GCS and FRSky telemtry
This allows selection of protocol type on telem2. The default is MAVLink, but can be selected as FrSky protocol
|
2014-07-29 17:08:20 -07:00 |
Andrew Tridgell
|
bea5c8ae0c
|
Rover: change default throttle slew rate to 100
this will help with NiMH batteries which may brownout with sudden
currents
|
2014-07-27 22:18:52 +10:00 |
Andrew Tridgell
|
7810314f7c
|
Rover: avoid integer underflow in mavlink txspace check
|
2014-07-27 22:12:08 +10:00 |
Andrew Tridgell
|
71132058b4
|
Rover: need AP_Terrain.h for AP_Mission
|
2014-07-25 14:36:39 +10:00 |
akdslr
|
1083a89b0f
|
Ardurover2 Parameters: Changed the SONAR prefix to RNGFND and renamed the previous SONAR_ parameters
|
2014-07-24 14:41:54 +10:00 |
Andrew Tridgell
|
739edafb42
|
Rover: use HAL board subtypes
|
2014-07-14 09:44:35 +10:00 |
Andrew Tridgell
|
3143e192d3
|
Rover: changes for more common mavlink code
|
2014-07-13 15:37:50 +10:00 |
Randy Mackay
|
170ca89a21
|
Rover: PREFLIGHT_SET_SENSOR_OFFSETS used to set compass offsets
replaces ardupilot specific message SET_MAG_OFFSETS
|
2014-07-10 20:25:28 +09:00 |
Randy Mackay
|
d789735d0d
|
Rover: rename compass set_and_save_offsets
|
2014-07-10 20:25:26 +09:00 |
Randy Mackay
|
9064d7ebca
|
Rover: add support for DO_SET_ROI outside of missions
|
2014-07-09 21:26:50 +09:00 |
Randy Mackay
|
3790b3aa82
|
Rover: add support for DO_SET_ROI within mission
|
2014-07-09 21:26:05 +09:00 |
Andrew Tridgell
|
bfe705a14d
|
Rover: convert to new AP_RangeFinder API
|
2014-07-08 15:07:50 +10:00 |
Andrew Tridgell
|
fdeedfa173
|
Rover: support 3 magnetometers
|
2014-07-04 12:49:36 +10:00 |
Andrew Tridgell
|
57685ddf84
|
Rover: update for AP_Mount change
|
2014-06-18 12:04:43 +10:00 |
Randy Mackay
|
4d93dd47ee
|
Rover: use common Log_Write_Camera
pair programmed with Craig Elder
|
2014-06-17 14:11:44 +10:00 |
Andrew Tridgell
|
a72b362c1f
|
Rover: prepare for new beta
|
2014-06-04 14:03:23 +10:00 |
Andrew Tridgell
|
a1b94bf852
|
Rover: prevent unsupported command messages
this prevents errors on DO_CHANGE_SPEED
|
2014-06-04 14:00:31 +10:00 |
Andrew Tridgell
|
43059fbff5
|
Rover: release 2.46beta
|
2014-06-02 11:20:14 +10:00 |
Andrew Tridgell
|
e35c0a578d
|
Rover: fix for HAL_GPIO_*
|
2014-06-02 10:42:36 +10:00 |
Andrew Tridgell
|
c4c912c703
|
Rover: use new GCS_Common.cpp functions
|
2014-05-28 09:35:50 +10:00 |
Andrew Tridgell
|
57e14f5387
|
Rover: updates for new GCS_MAVLink API
|
2014-05-21 12:45:25 +10:00 |
Andrew Tridgell
|
ed4068dc90
|
Rover: update baud rate parameter descriptions
|
2014-05-21 12:45:25 +10:00 |
Andrew Tridgell
|
1118609024
|
Rover: change baudrates to 16 bit
allows for much higher serial baud rates
|
2014-05-21 12:45:25 +10:00 |
Andrew Tridgell
|
fc0d703b9b
|
Rover: much simpler SPEED_TURN_GAIN implementation
as soon as we hit the SPEED_TURN_DIST we lower target speed to the
specified gain
|
2014-05-18 21:15:07 +10:00 |