Mirror/ardupilot
5
0
Fork 0
mirror of https://github.com/ArduPilot/ardupilot synced 2025-01-08 08:58:29 -04:00
Code Issues Packages Projects Releases Wiki Activity
25,506 Commits 71 Branches 510 Tags 771 MiB
b3d30cbd4b
Commit Graph

13238 Commits

Author SHA1 Message Date
murata
5f41b09fde HAL_PX4: Add input parameter check. 2016-12-02 17:09:47 -08:00
Tom Pittenger
3a9ad24907 AP_Landing: compute wind_alignment and half of head-wind 
Determine how aligned heading_deg is with the wind. Return result
is 1.0 when perfectly aligned heading into wind, -1 when perfectly
aligned with-wind, and zero when perfect cross-wind. There is no
distinction between a left or right cross-wind. Wind speed is ignored
 2016-12-02 15:35:28 -08:00
Peter Barker
0e2b3781ae AP_Gripper: a valid() method 2016-12-02 12:52:53 +11:00
Peter Barker
4a1439ca0b AP_Gripper: add grabbed and released method 2016-12-02 12:52:53 +11:00
Peter Barker
20b83861e9 AP_Mission: support for NAV_CMD_PLACE 
AP_Mission: check return values of mission fetches
 2016-12-02 12:52:50 +11:00
Peter Barker
20b86605fa SITL: gripper closes faster, vary load carried by gripper 
If gripper is closed on ground it is considered to be carrying
something
 2016-12-02 12:04:05 +11:00
Peter Barker
b751f836bb SITL: attach a string with a mass on the end to servo gripper 2016-12-02 12:04:05 +11:00
Peter Barker
f8918d15b1 SITL: add a hagl method to aircraft 2016-12-02 12:04:05 +11:00
Peter Barker
f1c23dc9be SITL: remove argument to on_ground 
This was always the current position
 2016-12-02 12:04:05 +11:00
Peter Barker
e24f3f9419 SITL: correct on-ground correction 
Using the cached ground_height_difference may mean
you end up at the wrong height if you were near
the edge of an SRTM square and had high horizontal
velocity
 2016-12-02 12:04:05 +11:00
Peter Barker
319cfa766b RC_Channel: add method to get current radio out for a function 2016-12-02 12:04:05 +11:00
Andrew Tridgell
23480a92ad HAL_PX4: only include parts needed for build 
allow for external USE_FLASH_STORAGE define in build
 2016-12-02 09:58:36 +11:00
Andrew Tridgell
6bc0c76d54 HAL_PX4: update for new AP_FlashStorage API 
allow flash sector erase while disarmed
 2016-12-02 09:49:40 +11:00
Andrew Tridgell
bfd137e36a AP_FlashStorage: added erase_ok callback 
this allows for simpler operation when application wants to allow
erase while disarmed.
 2016-12-02 09:49:40 +11:00
Andrew Tridgell
0e00c3cf9b AP_FlashStorage: reduced sector size for example 
allows it to fit in SRAM on PX4
 2016-12-02 09:49:40 +11:00
Andrew Tridgell
a66924422f HAL_PX4: implement optional flash backend for storage 
this allows the last two flash sectors to be used as storage for
parameters, waypoints etc.

A change to the bootloader to not erase the last two sectors is needed
 2016-12-02 09:49:39 +11:00
Andrew Tridgell
b0832e6c15 HAL_PX4: factor out storage functions 
ready for multiple backends
 2016-12-02 09:49:39 +11:00
Andrew Tridgell
d4f679f954 HAL_PX4: removed support for old storage files on microSD 2016-12-02 09:49:39 +11:00
Andrew Tridgell
4cfd63c30a HAL_PX4: refactor storage to use bitmask class 2016-12-02 09:49:39 +11:00
Andrew Tridgell
6adad11e2f AP_Common: added simple bitmask class 2016-12-02 09:49:39 +11:00
Andrew Tridgell
ed8f9b444a HAL_PX4: fixed whitespace 2016-12-02 09:49:38 +11:00
Andrew Tridgell
7ba957b946 HAL_SITL: flush stdout on panic 2016-12-02 09:49:38 +11:00
Andrew Tridgell
fc21e0f16f AP_FlashStorage: a flash storage driver 
this will allow for a storage backend using flash sectors in a log
structure
 2016-12-02 09:49:38 +11:00
Andrew Tridgell
a1bce2b54d AP_Compass: use get_random16() 2016-12-02 09:49:38 +11:00
Andrew Tridgell
a8d10e8c2c AP_Math: added get_random16() 2016-12-02 09:49:38 +11:00
Andrew Tridgell
cd57422eed AP_Baro: set retries high during init of MS5611 on I2C 2016-12-02 09:47:51 +11:00
Andrew Tridgell
4f1f6ec019 AP_Compass: added retries during init for i2c devices 
higher in init, lower for run
 2016-12-02 09:47:51 +11:00
Andrew Tridgell
28a318145c AP_HAL: move set_retries() up to Device class 
we really need set_retries() high during init for nearly all i2c
devices, and as many are written against the generic device class
moving it to the Device class makes this a lot easier. It is a NOP on
SPI.
 2016-12-02 09:47:51 +11:00
Georgii Staroselskii
e735a56c82 AP_BattMonitor: add default PM definitions for Navio boards 
As it turns out we haven't had default PM defs for power modules
intended to be used with Navio boards.
 2016-12-01 05:41:37 -08:00
Przemek Lekston
6d65b351cd AP_Mount: allow computation of gps point target in earth fixed frame 2016-12-01 18:42:48 +09:00
Randy Mackay
fc5f4c20cd AP_NavEKF2: remove redundant check of beacon nullptr 
thanks to muramura for spotting this
 2016-12-01 14:53:26 +09:00
Randy Mackay
08619a96be AP_Beacon: remove debug and editor settings 
thanks to muramura for spotting this
 2016-12-01 14:53:16 +09:00
murata
292257eaf2 AP_Beacon: checksum check uses XOR 2016-12-01 13:54:34 +09:00
murata
bcdd836820 AC_AttControl: remove unnecessary check of thr-mix-min 
Checks directly above ensure this check can never be true
 2016-12-01 13:52:04 +09:00
priseborough
665ba1c009 AP_NavEKF2: Fix bug in reporting of vertical position reset 
Fixes a bug that allows the last reported reset time to to wind back and an out of date reset delta to be reported if a switch to a core that has previously been reset occurs.
Allows multiple consumers provided they access on the same frame.
 2016-12-01 10:35:38 +09:00
priseborough
7f347e39dd AP_NavEKF2: Fix bug in reporting of horizontal position reset 
Fixes a bug that allows the last reported reset time to to wind back and an out of date reset delta to be reported if a switch to a core that has previously been reset occurs.
Allows multiple consumers provided they access on the same frame.
 2016-12-01 10:35:38 +09:00
priseborough
656d9bb2c4 AP_NavEKF2: Fix bug in reporting of yaw reset 
Fixes a bug that allows the last reported reset time to to wind back and an out of date reset delta to be reported if a switch to a core that has previously been reset occurs.
Allows multiple consumers provided they access on the same frame
 2016-12-01 10:35:38 +09:00
Georgii Staroselskii
865ff753f3 AP_Compass: use LSM9DS1 as primary for Navio 2 
This compass has been proved to work better on Navio boards. Users also
don't like high offsets (even though, they don't really mean much in
this context) reported by AK8963 in MPU9250 on Navio 2.
 2016-11-30 12:04:53 -08:00
Alexey Bulatov
96db31635d AP_Compass: set orientation ROLL_180 for LSM9DS1 on Navio2 2016-11-30 12:04:04 -08:00
Alexey Bulatov
163fa07ac0 AP_Compass: make orientation of LSM9DS1 compass configurable 2016-11-30 12:02:07 -08:00
Randy Mackay
a517db4b5e AP_OpticalFlow: resolve compiler warning 2016-11-30 18:00:15 +09:00
Randy Mackay
dfd58cc57b AP_InertialSensor: fix build warning for MPU9250 2016-11-30 18:00:14 +09:00
Randy Mackay
699279ed1f AP_InertialSensor: fix build warning for MPU6000 2016-11-30 18:00:13 +09:00
Randy Mackay
5009e83b6d AP_Compass: fix build warning for HMC5843 2016-11-30 18:00:12 +09:00
priseborough
431a74e0b4 DataFlash: log range beacon fusion data 2016-11-30 17:56:53 +09:00
priseborough
bbdf3982c6 DataFlash: remove Log_Write_EKF 2016-11-30 17:56:52 +09:00
Randy Mackay
66a9093cd0 AP_NavEKF2: getRangeBeaconDebug returns false on failure to get beacon data 2016-11-30 17:56:51 +09:00
priseborough
0ec8f0932a AP_NavEKF2: Prevent output of NaN's in range beacon debug output 
This can happen if this accessor function is called before the EKF states are initialised
 2016-11-30 17:56:50 +09:00
Randy Mackay
fbecda7eeb AP_NavEKF2: change order of variable initialisation 
No functional change, this modifies the init order to match the declaration order.
 2016-11-30 17:56:49 +09:00
Randy Mackay
82854953e7 AP_NavEKF2: minor comment fix 2016-11-30 17:56:48 +09:00
Randy Mackay
14a73e499a AP_NavEKF2: initialise two range beacon structures 2016-11-30 17:56:47 +09:00
priseborough
2ee8250807 AP_NavEKF2: Changes from code review by @muramura 2016-11-30 17:56:46 +09:00
Randy Mackay
1f4606e48a AP_NavEKF2: protect against null beacon 2016-11-30 17:56:45 +09:00
Randy Mackay
51ccfca31c AP_NavEKF2: fix format of statustext for beacon init 2016-11-30 17:56:44 +09:00
priseborough
ef03a85cd3 AP_NavEKF2: add range beacon interface and fusion method 2016-11-30 17:56:43 +09:00
priseborough
b4961971e0 AP_AHRS: add beacon object to ahrs 2016-11-30 17:56:42 +09:00
priseborough
4482743af5 AP_Beacon: Improve simulator testing of beacons 2016-11-30 17:56:41 +09:00
Randy Mackay
1225e18898 AP_Beacon: add sitl testing parameter file 2016-11-30 17:56:40 +09:00
Andrew Tridgell
5b83fa3a77 AP_Beacon: added SITL backend 2016-11-30 17:56:39 +09:00
Randy Mackay
821fc516fb AP_Beacon: library to accept distances from beacons 2016-11-30 17:56:37 +09:00
Randy Mackay
c4aa37525e SerialManager: add beacon to list of protocols 2016-11-30 17:56:35 +09:00
Leonard Hall
8af192ed9d AC_AttControl: allow MOT_THR_MIX_MAX to be 2.0 
The parameter description maximum of 0.9 should keep most users from
setting this parameter above 0.9 but there are rare cases for very high powered copters with low hover-throttle values where setting as high as 2.0 improves attitude control
 2016-11-30 17:56:34 +09:00
Andrew Tridgell
8468add63e AP_Motors: mark PWM_TYPE as reboot required 2016-11-30 10:53:26 +11:00
Andrew Tridgell
ce5ed66b45 HAL_PX4: auto-scale brushed output with ESC output range 2016-11-30 10:53:26 +11:00
Andrew Tridgell
ce517384e1 AP_Motors: support MODE_PWM_BRUSHED16KHZ 2016-11-30 10:53:26 +11:00
Andrew Tridgell
b3286c3da0 HAL_PX4: support MODE_PWM_BRUSHED16KHZ 2016-11-30 10:53:25 +11:00
Andrew Tridgell
fac8f1db03 AP_HAL: added MODE_PWM_BRUSHED16KHZ 2016-11-30 10:53:25 +11:00
Peter Barker
bc45ab5409 DataFlash: add a heartbeat for the io thread in DataFlash_File 2016-11-29 15:14:09 -08:00
Peter Barker
e11c276b35 DataFlash_File: stop trying to stuff a uint64_t into a uint32_t 2016-11-29 15:14:09 -08:00
Peter Barker
fff2068a5a AP_Arming: add arming check for logging actually started 2016-11-29 15:14:09 -08:00
Peter Barker
5776b3fddb AP_Arming: check CardInserted in AP_Arming 2016-11-29 15:14:09 -08:00
Andrew Tridgell
a2e92c4054 AP_BoardConfig: increase uavcan bus settle time to 2s 
needed to ensure zubax mag has time to come up
 2016-11-29 12:51:16 +11:00
Peter Barker
2c8a0a9123 DataFlash: rotate files when vehicle is disarmed 2016-11-28 09:42:09 -08:00
Peter Barker
fc79fb4ab4 DataFlash: know about armed state of vehicle 2016-11-28 09:42:09 -08:00
Randy Mackay
bac5deed43 AP_IRLock: health reporting based on successful I2C transfer 
This change is required because sync messages are only sent if a target is visible
 2016-11-28 12:08:36 +09:00
Andrew Tridgell
28b3de91cf AP_Compass: fixed orientation of internal i2c compass for FMUv1 
thanks to Peter for noticing
 2016-11-28 13:02:15 +11:00
Andrew Tridgell
40bd3a8861 HAL_PX4: tidy up thread wait code 
use the same method for all threads. Makes for tidier top output
 2016-11-28 10:28:01 +11:00
Andrew Tridgell
f039a37971 HAL_PX4: set names on all bus threads 2016-11-28 10:18:52 +11:00
Andrew Tridgell
00ccacb2ab AP_HAL: expose device bus number 2016-11-28 10:18:32 +11:00
Andrew Tridgell
f04b186879 HAL_PX4: fixed bug in instantiation of I2C bus threads 
we ended up with a thread per device instead of a thread per bus!
 2016-11-28 09:53:19 +11:00
Andrew Tridgell
12e0c840e8 HAL_PX4: set thread names for main threads 2016-11-28 09:47:49 +11:00
Andrew Tridgell
c62b64a600 AP_IRLock: improved sync protocol for IRLock I2C driver 2016-11-28 08:39:06 +11:00
Andrew Tridgell
50db4d362d AC_PrecLand: use new in-tree IRLock driver 2016-11-28 08:26:58 +11:00
Andrew Tridgell
c6ea451c56 AP_IRLock: new in-tree IRLock driver on I2C 2016-11-28 08:26:58 +11:00
Andrew Tridgell
22717f23be AP_OpticalFlow: apply yaw for flow in all drivers 2016-11-28 08:26:57 +11:00
Andrew Tridgell
06dfbc3e09 AP_OpticalFlow: added common driver for PX4Flow 
used on Linux and NuttX boards
 2016-11-28 08:26:57 +11:00
Andrew Tridgell
52715c5d16 AP_OpticalFlow: fixed default pixart flow scaling 2016-11-28 08:26:57 +11:00
Andrew Tridgell
9b93e12bbb AP_OpticalFlow: retry config register write up to 5 times 2016-11-28 08:26:57 +11:00
Andrew Tridgell
ea462d80e6 AP_OpticalFlow: added _applyYaw method to backend 
for common handling of yaw correction
 2016-11-28 08:26:57 +11:00
Andrew Tridgell
abc42c737c AP_OpticalFlow: added update function for Pixart flow driver 2016-11-28 08:26:57 +11:00
Andrew Tridgell
0be1b1aac2 AP_OpticalFlow: give access to AHRS from all backends 2016-11-28 08:26:56 +11:00
Andrew Tridgell
def6e014cf HAL_SITL: removed old optflow simulation 2016-11-28 08:26:56 +11:00
Andrew Tridgell
42435e700b SITL: expose height above ground to all models 2016-11-28 08:26:56 +11:00
Andrew Tridgell
2e2f8ad8cf AP_OpticalFlow: added SITL flow driver as normal driver 
move away from HAL_SITL embedded drivers
 2016-11-28 08:26:56 +11:00
Andrew Tridgell
a96ed8c188 AP_HAL: added virtual destructor for Semaphores 2016-11-28 08:26:56 +11:00
Andrew Tridgell
0889b25afa AP_OpticalFlow: initial code for Pixart optical flow chip 2016-11-28 08:26:56 +11:00
Randy Mackay
54a87ad35c AP_Proximity: set minimum boundary distance 
AC_Avoidance will not stop if it thinks the vehicle is on or outside the polygon.  Setting a minimum distance ensures the vehicle is always within the polygon.
 2016-11-27 15:05:48 +09:00
Randy Mackay
57ae14ab4c AP_Proximity: add get distances, distance_max, distance_min 
These are used to send distance-sensor messages to the ground station
 2016-11-27 15:05:45 +09:00
Randy Mackay
b46cc623a0 AC_Avoidance: adjust_velocity_polygon accepts body-frame points 2016-11-27 15:05:42 +09:00
Randy Mackay
55d79d9a32 AC_Avoidance: proximity sensor method re-uses polygon fence boundary code 2016-11-27 15:05:41 +09:00
Randy Mackay
cdee68174d AC_Avoidance: rename adjust_velocity_polygon_fence 2016-11-27 15:05:39 +09:00
Randy Mackay
79280036de AC_Avoidance: rename adjust_velocity_circle_fence method 2016-11-27 15:05:38 +09:00
Randy Mackay
40c4e75ae7 AC_Avoidance: remove unnecessary const float arguments 2016-11-27 15:05:36 +09:00
Randy Mackay
6293fa1595 AP_Proximity: add boundary points for object avoidance 
This returns a fence which can be used for object avoidance by AC_Avoidance
 2016-11-27 15:05:35 +09:00
Randy Mackay
26332251f5 AP_Proximity: add ignore areas 
Only SF40c uses these ignore areas for now at least.
It is safe to increase the eeprom locations for the 2nd proximity instance because we only define a single instance.
 2016-11-27 15:05:27 +09:00
Randy Mackay
87dea46f5d AP_Proximity: add get_closet_object for use in pre-arm checks 2016-11-27 12:03:06 +09:00
Randy Mackay
a56c9545bd AP_Proximity: SITL driver filles in backend sector data 2016-11-27 12:03:04 +09:00
Randy Mackay
f594a5a7d6 AP_Proximity: move sectors to backend 
This prepares for sectors to be re-used by the SITL driver
 2016-11-27 12:03:01 +09:00
Andrew Tridgell
f9845c93b1 AP_InertialSensor: keep transfers nicely setup for DMA on stm32 
this avoids using stack based bounce buffers which may not support DMA
on stm32
 2016-11-27 11:26:10 +11:00
Andrew Tridgell
37a9a78725 HAL_PX4: avoid bounce buffers for SPI when possible 2016-11-27 11:10:18 +11:00
Andrew Tridgell
f3d401abb9 HAL_PX4: fixed FMUv1 build 2016-11-27 07:45:54 +11:00
Andrew Tridgell
df60b4252a HAL_PX4: reduced noise in PX4 console 2016-11-26 19:06:15 +11:00
Andrew Tridgell
771cedca3d AP_InertialSensor: reduced number of SPI transfers 
use cached copy of temperature in MPU6000 and MPU9250 to detect FIFO
error when possible
 2016-11-26 19:02:22 +11:00
Andrew Tridgell
fdc94ec28a AP_HAL: fixed frequency init for register checking 2016-11-26 18:36:36 +11:00
Tom Pittenger
40777e9e74 AP_Mission: move jump_to_landing_sequence() to AP_Mission 2016-11-25 19:07:30 -08:00
Tom Pittenger
d4d186058d AP_Landing: move jump_to_landing_sequence() to AP_Mission 2016-11-25 19:07:30 -08:00
Tom Pittenger
1a70e2f353 AP_Landing: new param LAND_TYPE to split current behavior into AP_Landing_Slope.cpp 2016-11-25 19:07:30 -08:00
Tom Pittenger
c7bbb6998a TECS: set landing params as private and use accessors 2016-11-25 19:07:30 -08:00
Tom Pittenger
fe4cd7bbbd AP_Landing: set landing params as private and use accessors 2016-11-25 19:07:30 -08:00
Tom Pittenger
98ae77d6a3 AP_Landing: Migrate the rest of "LAND_" params from Plane to AP_Landing 2016-11-25 19:07:30 -08:00
Tom Pittenger
d53b177877 AP_Landing: migrate aparm "LAND_" params from plane to AP_Landing 2016-11-25 19:07:30 -08:00
Tom Pittenger
9035dcbbc5 AP_TECS: migrate aparm "LAND_" params from plane to AP_Landing 2016-11-25 19:07:30 -08:00
Tom Pittenger
15ec551990 AP_Vehicle: migrate aparm "LAND_" params from plane to AP_Landing 2016-11-25 19:07:30 -08:00
Tom Pittenger
8f36fe7705 AP_Landing: migrate aparm "LAND_" params from plane to AP_Landing 2016-11-25 19:07:30 -08:00
Tom Pittenger
fc84c61672 AP_Landing: add const to all possible vars in function calls 2016-11-25 19:07:30 -08:00
Tom Pittenger
fc2f518f31 Plane: revert auto_state.checked_for_autoland back to Plane 2016-11-25 19:07:30 -08:00
Tom Pittenger
3814b5a38b AP_Landing: resorted functions so they line up with plane/landing for easier compare 2016-11-25 19:07:30 -08:00
Tom Pittenger
75e625fd30 AP_landing: port the rest of plane/landing.cpp 2016-11-25 19:07:30 -08:00
Tom Pittenger
9a79b79f1e AP_Landing: port more from plane 2016-11-25 19:07:30 -08:00
Tom Pittenger
10027b21d6 Plane/AP_Landing: port setup_landing_glide_slope() 2016-11-25 19:07:30 -08:00
Tom Pittenger
f556f705e6 Plane: move various g params to aparms 2016-11-25 19:07:30 -08:00
Tom Pittenger
d2376b7c8b Plane: migrate two helper functions to AP_Landing 
- move functions restart_landing_sequence() and jump_to_landing_sequence() to AP_Landing
- NOTE: jump_to function can not set mode, so it is now done externally in vehicle
 2016-11-25 19:07:30 -08:00
Tom Pittenger
896b931a7c Plane: Move auto_state variables to AP_landing members 2016-11-25 19:07:30 -08:00
Tom Pittenger
61b02cb41d AP_Landing: add new library for fixed wing landing abstraction 2016-11-25 19:07:30 -08:00
Tom Pittenger
ce8db1fdba Plane: move struct Rangefinder_State to AP_Vehicle 2016-11-25 19:07:30 -08:00
Andrew Tridgell
eaf378cbf0 GCS_MAVLink: updated optical flow send 2016-11-26 12:27:41 +11:00
Andrew Tridgell
f2246326bb AP_Baro: added MS5611 probing, and support 3 baros on Pixhawk2 
this adds sensor probing for barometers, simplifies the MS5611 driver,
and adds support for the I2C external barometers on Pixhawk2
 2016-11-25 21:40:11 +11:00
Andrew Tridgell
954728c9e9 AP_HAL: added set_chip_select() API 
for devices with unusual timings
 2016-11-25 21:26:27 +11:00
Andrew Tridgell
638e89bd1d HAL_PX4: implement set_chip_select for SPI 2016-11-25 21:24:10 +11:00
Andrew Tridgell
60801314e0 HAL_PX4: added different modes for external SPI 
and lower bus speed to 1MHz
 2016-11-25 21:24:10 +11:00
Andrew Tridgell
bcb6663187 HAL_PX4: added table of actual bus speeds for SPI 2016-11-25 20:31:43 +11:00
Andrew Tridgell
27605b0258 AP_InertialSensor: run invensese reg checking at low speed 
config register read/write should be at low bus speed.

also change to check every 20 calls to reduce checking cost
 2016-11-25 20:31:40 +11:00
Andrew Tridgell
7100272f14 AP_HAL: default to register checking every 10th call 
this saves having this in nearly all callers
 2016-11-25 20:31:36 +11:00
Andrew Tridgell
0e793e1214 HAL_PX4: lower SPI bus speed on invensense devices 
now we are using DMA we don't need such high bus speed, and this makes
SPI reliable with a wider range of devices.
 2016-11-25 18:32:19 +11:00
Andrew Tridgell
7d57f00ca0 AP_Compass: removed debug line 
this is now common when using in-tree drivers
 2016-11-25 18:23:53 +11:00
Andrew Tridgell
0f984290c3 AP_InertialSensor: enable fast sampling by default on some boards 2016-11-25 17:59:54 +11:00
Andrew Tridgell
f62972d966 AP_Compass: fixed build on bhat 
enable both compasses if found
 2016-11-25 17:50:24 +11:00
Andrew Tridgell
1f403b02ef AP_Compass: switch to continuous 155Hz mode for LIS3MDL 2016-11-25 17:50:24 +11:00
Andrew Tridgell
62805f59fa AP_Compass: added AK09916 driver 
yet another magnetometer!
 2016-11-25 17:50:24 +11:00
Andrew Tridgell
17a117b324 AP_Compass: be a bit less verbose in startup 2016-11-25 17:50:23 +11:00
Andrew Tridgell
0e4b8781b2 AP_Compass: auto-detect LIS3MDL compass 2016-11-25 17:50:23 +11:00
Andrew Tridgell
b6b2919126 AP_Compass: don't panic on too many compasses 
just use the first ones found. Panicing because you have too many
isn't useful
 2016-11-25 17:50:23 +11:00
Andrew Tridgell
40ef68f104 AP_Compass: added a LIS3MDL compass driver 2016-11-25 17:50:23 +11:00
Andrew Tridgell
f3a778f980 AP_InertialSensor: fixed freeing of fifo buffer 2016-11-25 17:50:19 +11:00
Andrew Tridgell
6f28c61c8d AP_InertialSensor: changed SIZE to LEN 
thanks to Lucas for suggestion
 2016-11-25 17:50:19 +11:00
hiro2233
cb7f46d653 AP_InertialSensor: fixed handling of user_ctrl register 
with aux bus implementations
 2016-11-25 17:50:18 +11:00
Andrew Tridgell
29bbee421e HAL_PX4: enable sharing of SPI bus with PX4 with DMA 2016-11-25 17:50:18 +11:00
Andrew Tridgell
9b4c588c09 AP_InertialSensor: adapt drivers for SPI-DMA capable systems 
no longer need accumulate() transfers with SPI enabled DMA on stm32
 2016-11-25 17:49:58 +11:00
Andrew Tridgell
3fad5ca065 HAL_PX4: implement DMA allocation routines 2016-11-25 17:49:58 +11:00
Andrew Tridgell
e42bb20052 AP_HAL: added dma allocation routines to hal.util 2016-11-25 17:49:58 +11:00
Andrew Tridgell
28daddaaf2 AP_InertialSensor: don't use accumulate approach on Linux or I2C 2016-11-25 17:49:57 +11:00
Andrew Tridgell
d9c8db7024 AP_InertialSensor: implement a new strategy for fast sampling 
this moves to using a 1p filter on the high rate data, followed by
averaging down to 1kHz then a 2p filter to apply configured cutoff
frequency.

It also fixes the FIFO reset to not cause data corruption. We need to
disable all FIFO channels before doing the reset, and wait for the
FIFO to stop in the sensor.

Finally it moves sampling of the MPU6000 and MPU9250 into the main
thread. That significantly improves scheduling performance as we no
longer get long FIFO SPI transfers happening during other tasks. All
transfers happen at the start of the fast loop. That makes timing much
more predictable.

Thanks to Leonard and Paul for help with this design!
 2016-11-25 17:49:57 +11:00
Andrew Tridgell
b165e025d9 Filter: added new constructor for 1p filter 
allow both sample rate and cutoff to be specified in constructor
 2016-11-25 17:49:57 +11:00
Andrew Tridgell
7220dc15f9 HAL_PX4: adjusted bus speeds on invensense sensors 2016-11-25 17:49:57 +11:00
Andrew Tridgell
5934a099a4 AP_HAL: added support for more SRXL varients 
based on work by Roman Seb <roman-29188@gmx.de>
 2016-11-24 22:54:23 +11:00
priseborough
0a177d04fd AP_NavEKF2: Simply core switch implementation 
Functionally equivalent
 2016-11-24 19:58:10 +09:00
priseborough
7d48054e6f AP_NavEKF2: Group GPS innovation tests when compiling error score 2016-11-24 19:58:07 +09:00
Randy Mackay
e9ea06bd10 AP_NavEKF2: minor comment fix 2016-11-24 19:58:03 +09:00
Randy Mackay
a32068a973 AC_WPNav: remove ekf position reset handler 
This has been migrated to the position control library
 2016-11-24 19:58:00 +09:00
Randy Mackay
1012333eef AC_PosControl: add ekf position reset handling 
Previously this was in AC_WPNav and used only for loiter but it should work for any flight modes that use horizontal or vertical position control
 2016-11-24 19:57:56 +09:00
Randy Mackay
c615bac1cd AP_AHRS: add getLastPosDownReset accessor 2016-11-24 19:57:53 +09:00
Randy Mackay
6406e34016 AC_WPNav: remove unused _loiter_step member 2016-11-24 19:57:50 +09:00
priseborough
0df45703f1 AP_NavEKF2: Fix errors in position reset delta publishing 2016-11-24 19:57:47 +09:00
priseborough
f6021c959d AP_NavEKF2: capture and publish vertical position reset deltas 
Calculate the change in vertical position due to a internal EKF state reset or a EKF core switch
 2016-11-24 19:57:45 +09:00
priseborough
e62863f9a1 AP_NavEKF2: Reduce unnecessary EKF core switching 
1) Do not switch to a core until its states have been updated.
2) Distinguish between mandated switches required for health failure and optional switches required due to innovation checks failing.
3) Apply hyseresis to innovation check levels
 2016-11-24 19:57:41 +09:00
murata
de153ce1d7 AP_NavEKF: Correct the setting process of variable dAngBiasSigma. 2016-11-24 03:24:18 +00:00
murata
ec42ddfb4e AP_NavEKF: style changes (tab to spaces, etc.) 
AP_NavEKF: style changes (tab to spaces, etc.)

AP_NavEKF: style changes (tab to spaces, etc.)
 2016-11-24 03:24:18 +00:00
ShingoMatsuura
e9feb7bdda AP_RangeFilnder: moved the const buffer definition to the header and changed from '8' to 'sizeof(send_request_buffer)' 2016-11-23 10:28:38 -08:00
ShingoMatsuura
f97ede9865 AP_RangeFilnder: change send_request_buffer member variable to const and other fixes 2016-11-23 10:28:38 -08:00
ShingoMatsuura
e8ff156fa6 AP_RangeFilnder: add clear buffer at INIT state and change send_buffer to member variable to reduce CRC computation for sending request 2016-11-23 10:28:38 -08:00
ShingoMatsuura
c1c643e56e AP_RangeFinder: remove clear buffer in send_request 2016-11-23 10:28:38 -08:00
Leonard Hall
ea0e413b04 AC_AttControl: do not limit rate if ATC_ACCEL_MAX param is zero 2016-11-23 14:43:29 +09:00
murata
ae927e1775 DataFlash: Adjust the return value to the type of the method. 
DataFlash: Adjust the return value to the type of the method.
 2016-11-22 10:07:16 -08:00
Lucas De Marchi
f9b0f9164a AP_HAL_Linux: add TODO to AnalogIn_Raspilot 
This is especially bad for raspilot since it has a spi bus shared for
all the peripherals.
 2016-11-21 18:11:31 -02:00
Lucas De Marchi
87c6d5da13 AP_InertialSensor: replace panic() with return 
When blocking forever there's no reason to call panic later since it
will never going to be reached. This reduces binary size in a few bytes
since the message isn't required anymore.
 2016-11-21 18:04:10 -02:00
Andrew Tridgell
c2125a0078 AP_Baro: wait forever for semaphore on startup 2016-11-21 18:04:10 -02:00
Andrew Tridgell
6f82ec0642 HAL_Linux: convert RASPilot drivers to thread per bus 2016-11-21 18:04:10 -02:00
Andrew Tridgell
6129b1abb6 AP_InertialSensor: wait forever for semaphore on startup 
some boards take a silly amount of time to get semaphore on startup
 2016-11-21 17:57:21 -02:00
Julien Beraud
d50fd3a6cd AP_OpticalFlow: fix onboard init 
mistake in patch to avoid segfault which enabled
AP_OpticalFlow_Linux instead of AP_OpticalFlow_Onboard.
Store a reference to ahrs in order to execute init later, when
ahrs is initialized.
 2016-11-21 16:38:59 -02:00
Michael du Breuil
d97861d685 AP_GPS: Ublox: Skip SBAS request if we don't want to alter it 2016-11-21 14:15:19 +09:00
Randy Mackay
b7f95d9c25 AP_RangeFinder: remove serial.end and begin 
Also some formatting changes
 2016-11-21 14:07:01 +09:00
Randy Mackay
99fafcb495 RangeFinder: add uLanding to TYPE parameter description 2016-11-21 13:52:15 +09:00
Ricardo de Almeida Gonzaga
148fa03d6b AP_RangeFinder: support MaxBotix Serial rangefinders 
This has been tested with LV-MaxSonar®-EZ1 MB1010
 2016-11-21 11:21:56 +09:00
Randy Mackay
44c5fee90d AP_RangeFinder: formatting fixes for uLanding 2016-11-21 11:07:41 +09:00
davidaroyer
69bc4c42c9 AP_RangeFinder: Add support for Aerotenna uLanding radar altimeter 2016-11-21 11:07:41 +09:00
davidaroyer
faa534cf64 AP_SerialManager: Add support for Aerotenna uLanding radar altimeter 2016-11-21 11:07:41 +09:00
Jonathan Challinger
22517422f9 AP_Motors: add option to disable motor PWM output while disarmed 2016-11-21 10:49:21 +09:00
Andrew Tridgell
6c09758447 AP_RangeFinder: removed momentary spikes in PulsedLight I2C Lidar 2016-11-21 10:30:04 +11:00
Andrew Tridgell
252f90ba36 HAL_PX4: drop I2C speed to 100kHz 
reduce I2C errors on long cables for all sensors
 2016-11-21 10:29:52 +11:00
Andrew Tridgell
b3ac4fcb72 GCS_MAVLINK: speed up USB log download 
makes it about 2x as fast on Pixhawk
 2016-11-20 18:41:25 +11:00
Lucas De Marchi
504de3ea9e AP_HAL_Linux: RCInput_RPI: fix whitespaces 
Also add/change some minor coding style issues, reducing scope of
variables.
 2016-11-19 14:05:22 -02:00
Lucas De Marchi
aadc1643fc AP_HAL_Linux: reduce speed of MPU* devices 
After introducing the temperature check we are resetting the fifo
several times due to difference in temperature.
 2016-11-19 14:05:22 -02:00
Lucas De Marchi
8d3361cef4 AP_HAL_Linux: RCInput_RPI: fix using Util class on constructor 
Program received signal SIGSEGV, Segmentation fault.
0x000b8760 in Linux::UtilRPI::get_rpi_version() const ()
(gdb) bt
 #0  0x000b8760 in Linux::UtilRPI::get_rpi_version() const ()
 #1  0x000b57ac in Linux::RCInput_RPI::RCInput_RPI() ()
 #2  0x0000acfc in _GLOBAL__sub_I__ZN9HAL_LinuxC2Ev ()
 #3  0x000e1600 in __libc_csu_init ()
 #4  0x76cad228 in __libc_start_main (main=0x7efff774, argc=1994186752,
     argv=0x76cad228 <__libc_start_main+168>, init=0xe15b4 <__libc_csu_init>,
     fini=0xe1614 <__libc_csu_fini>, rtld_fini=0x76fdf464 <_dl_fini>,
     stack_end=0x7efff774) at libc-start.c:246
 #5  0x0000afa4 in _start ()
 2016-11-19 14:05:22 -02:00
Lucas De Marchi
bc476e1987 AP_ADC: fix ADS1115 instantiation 
This can't be called on constructor since hal may not be initialized at
that time.
 2016-11-19 14:05:22 -02:00
Andrew Tridgell
216cf53922 AP_InertialSensor: handle FIFO overflow for MPU6k and 9250 
this prevents temporary corruption of INS data on FIFO overflow
 2016-11-19 12:54:22 +11:00
Lucas De Marchi
c6b0a71c47 AP_Compass: Calibrator: use inplace initializer on array 2016-11-18 20:03:30 -02:00
Siddharth Bharat Purohit
b36ee10e7c AP_Compass: fix wrong memset in compass calibrator 2016-11-18 20:03:30 -02:00
Siddharth Bharat Purohit
451c2f146d AP_AccelCal: fix bug preventing accel cal fit to run more than one iteration 
The check for fitness being smaller than the last value should use the
absolute value, to mean the fitness isn't changing since last iteration.
It's currently always quiting the function after the first iteration.

However for Gauss Newton we anyway want to run as many iterations as we
can, because there are ups and downs along the iteration so we might get
say best result where before and after iterations were bad. The lines
above takes care that sane and the best is selected.
 2016-11-18 20:03:30 -02:00
Tom Pittenger
11229d2588 SITL: fix whitespace 2016-11-18 10:42:10 -08:00
ori ganoni
631b5c3ebc adding turbulance to SITL 2016-11-17 20:06:35 -08:00
Andrew Tridgell
18d4286166 AP_InertialSensor: fixed pixfalcon 9250 detection 2016-11-18 14:24:39 +11:00
Peter Barker
fd5f79b238 AC_PrecLand: a pure-ArduPilot simulated SITL precision land backend 2016-11-18 09:41:56 +09:00
Peter Barker
4df4ba1956 AC_PrecLand: make SITL_Gazebo an alternate backend 
Preprocessor directives were used to hack in the use
of AP_IRLock_SITL.  Instead, make it a full backend itself.
 2016-11-18 09:41:56 +09:00
Peter Barker
d2285ace6c AC_PrecLand: remove unneeded empty handle_msg 2016-11-18 09:41:56 +09:00
Peter Barker
03710beb18 AC_PrecLand: make handle_msg impure and do nothing 2016-11-18 09:41:56 +09:00
Peter Barker
1eca4e128d AC_WPNav: method to retrieve current desired pilot accels 2016-11-18 09:41:56 +09:00
Andrew Tridgell
cb1a5d4c74 AP_InertialSensor: take semaphore for update of accumulators 
this fixes a race in update of delta angle and delta velocity between
backend and frontend
 2016-11-18 06:32:17 +11:00
Pierre Kancir
84aaca7c6e SITL: add missing break 2016-11-17 13:46:10 +00:00
Peter Barker
cf5ed25c9e AP_HAL_Linux: do not attempt realtime when compiling Replay 2016-11-16 22:25:18 -02:00
Julien Beraud
ac3f49b06f RPIOUART_Driver: fix warning 
cast PKT_MAX_REGS to uint32_t to be able to compare without a warning
 2016-11-16 17:37:15 -02:00
Julien Beraud
dc86a53862 OpticalFlow: move onboard alloc to init() 
No reason to keep it in the constructor
 2016-11-16 20:38:00 +11:00
Andrew Tridgell
f3f1f6b0b6 AP_InertialSensor: fixed gyro orientation on l3gd20H on pixhawk 2016-11-16 20:33:56 +11:00
Michael Oborne
fbeafa0d0a Update AP_BoardConfig.cpp 2016-11-16 16:00:12 +11:00
Michael Oborne
e7e3478a58 AP_BoardConfig: add extra uavcan options 
this enables the display of dynamic id assignment, which prevents the need for a serial connection to the esc, for first config.
 2016-11-16 16:00:12 +11:00
Peter Barker
37c2c0a822 AP_Stats: fix variable reset time bug 
Use Jan 1st 2016 as epoch time rather than Unix epoch.

PixHawk's 32-bit floats can't store a 32-bit timestamp.
 2016-11-16 09:14:01 +09:00
Andrew Tridgell
6af00027ab AP_InertialSensor: removed unused variables 
thanks to Francisco for noticing
 2016-11-16 08:41:06 +11:00
Pierre Kancir
86c8145bd9 SITL: Change Flighgear port with instance number 2016-11-16 08:27:48 +11:00
Pierre Kancir
c4b5bd4bd9 SITL: revert fg view to activate by default and use flag to disable it 2016-11-16 08:27:48 +11:00
Pierre Kancir
e2b939df39 SITL: rename simin to rcin for better readability 2016-11-16 08:27:48 +11:00
Pierre Kancir
59c84c637e SITL: make fg view optional 2016-11-16 08:27:48 +11:00
Francisco Ferreira
bfbb275577 AP_InertialSensor: on accel cal failure don't save values to zero 
When the accel calibration fails leave the previous values saved but set them to defaults (scale default is ones, not zeros) and notify the GCS
This fixes an arithmetic exception when doing a second accel cal after the first one failed
 2016-11-15 11:42:54 -08:00
Francisco Ferreira
a3fcebc501 AP_Param: add set_and_notify to vectors 2016-11-15 11:42:54 -08:00
Francisco Ferreira
e763896b6a AP_AccelCal: send and receive MAV_CMD_ACCELCAL_VEHICLE_POS 
Message is sent at a maximum of 1Hz
Status text is sent, but if command is received it stops and only uses commands
 2016-11-15 11:42:54 -08:00
Francisco Ferreira
7463d4c8f7 GCS_MAVLink: add function to send command requesting vehicle position during accel cal 2016-11-15 11:42:54 -08:00
Francisco Ferreira
bc661f013e AP_AccelCal: use vehicle position values from MAVLink enum 2016-11-15 11:42:54 -08:00
Francisco Ferreira
c07f377eb1 AP_AccelCal: make collect_sample responsible for state changes 
Also only set the snoop if the step has changed
 2016-11-15 11:42:54 -08:00
Andrew Tridgell
624178f3be AP_InertialSensor: added INS_FAST_SAMPLE parameter 
this allows enable/disable of fast sampling per IMU, making
experimentation easier.

It also fixes the fast sampling to always average over 8 samples, and
fixes the 9250 to use the correct accumulator when not doing fast
sampling
 2016-11-15 21:16:40 +11:00
Andrew Tridgell
c0303ffe8a AP_InertialSensor: temporarily disable fast sampling 
a problem has been found with the filtering with fast sampling on
ICM-20608 and MPU9250. Disable until it is solved.
 2016-11-14 18:18:17 +11:00
Andrew Tridgell
ae2dc5570e AP_Proximity: added SITL proximity backend 
using fence points for avoidance
 2016-11-14 15:53:43 +09:00
Andrew Tridgell
b16226dddf AP_Baro: fixed a bug with corrupted conversions in MS5611 driver 
the datasheet says that if you get back zero in an ADC read that the
next value can be corrupt. I have seen this happen on the FMUv1,
leading to bad altitude readings
 2016-11-13 17:08:06 +11:00
Andrew Tridgell
ac4b100ae4 AP_BoardConfig: use in-tree drivers for FMUv1 2016-11-13 16:21:17 +11:00
Andrew Tridgell
14a26bee6c AP_HAL: fixed ms5611 address on FMUv1 2016-11-13 16:21:05 +11:00
Andrew Tridgell
00938f7dbb HAL_PX4: fixed enabled channels in init 
now this is called from AP_BoardConfig we need to not clear enabled
channels
 2016-11-13 13:16:22 +11:00
Andrew Tridgell
0502eca7fc HAL_PX4: removed unused variable 2016-11-13 13:16:22 +11:00
Andrew Tridgell
c794ad9ee8 AP_InertialSensor: use smaller FIFO buffers 
this allows for reading multiple chunks from the fifo per callback
 2016-11-13 13:16:22 +11:00
Michael Oborne
c62050dc1b AP_GPS_SBF: fix accuracy reported by driver 2016-11-12 16:42:35 +09:00
Andrew Tridgell
5f3c14ea01 AP_RangeFinder: fixed tabs -> spaces 2016-11-12 14:18:15 +11:00
Andrew Tridgell
41018feb3a HAL_PX4: split I2C transfers 
this avoids SCL low with a stop condition, which doesn't work with
some devices
 2016-11-12 14:18:14 +11:00
Andrew Tridgell
0c7dd99d7e AP_RangeFinder: support LidarLite V2 using in-tree driver 
needs to run in continuous mode
 2016-11-12 14:18:14 +11:00
Andrew Tridgell
fd7b313e34 AP_RangeFinder: removed pwm_input_main 
thanks to Francisco
 2016-11-11 15:49:53 +11:00