Andrew Tridgell
b079a96eaf
Copter: removed GPS_STATUS message
...
this message is huge, and completely pointless now that we have
num_satellites in GPS_RAW_INT
2013-01-05 20:39:31 +11:00
Andrew Tridgell
c48714be16
Copter: enabled PX4 sensors
2013-01-05 20:39:31 +11:00
James Bielman
264db3670e
AP_Baro: Add CONFIG_MS5611_SERIAL option to choose between SPI and I2C.
...
- Update ArduCopter and ArduPlane modules to pass the correct serial
driver to the MS5611 driver.
- Update barometer examples, assuming SPI.
2013-01-03 13:48:06 -08:00
rmackay9
ed79e8c954
ArduCopter: correct TRIM_THROTTLE parameter comments
2013-01-03 00:39:18 +09:00
rmackay9
861a66e26e
ArduCopter: remove @brief from GCS_MAVLINK class's comments because they mess up the mission planner's parsing of parameter descriptions
2013-01-03 00:34:10 +09:00
rmackay9
ba8e9c8f9e
ArduCopter: revert path for reading gcs parameter descriptions
2013-01-02 23:51:27 +09:00
rmackay9
d56e9cc701
ArduCopter: change path for GCS_Mavlink parameter descriptions
2013-01-02 23:42:05 +09:00
rmackay9
4ef7e7b1c6
ArduCopter: add parameter descriptions for GCS_Mavlink objects
2013-01-02 23:36:48 +09:00
Andrew Tridgell
94e3322e24
Copter: fixed build on px4
2013-01-02 22:09:02 +11:00
rmackay9
886329898c
ArduCopter: minor fixup to a few parameter descriptions
2013-01-02 18:50:25 +09:00
rmackay9
ac028cca74
ArduCopter: remove spaces to allow MP to parse RC Channel parameter descriptions
2013-01-02 18:40:59 +09:00
rmackay9
42a5d183da
ArduCopter: added parameter descriptions for optflow, throttle and loiter pid controllers
2013-01-02 18:32:11 +09:00
rmackay9
ffa923981c
ArduCopter: added parameter description for navigation and some throttle controllers
2013-01-02 17:44:21 +09:00
rmackay9
4a975d35ce
ArduCopter: add parameter descriptions for loiter's lat and lon rate controllers
2013-01-02 17:20:58 +09:00
rmackay9
c595a1e9a2
ArduCopter: updated parameters for roll, pitch and yaw rate controllers.
...
Also added reference to AP_Motors_Class.cpp so that parameter descriptions can be seen in mission planner.
2013-01-02 17:05:57 +09:00
Andrew Tridgell
374af1cd14
build: change from Arduino.mk to apm.mk
2013-01-02 17:29:37 +11:00
Andrew Tridgell
e56a7eacec
Copter: don't pass board version to motors
2013-01-02 15:28:34 +11:00
Andrew Tridgell
394dccf9a8
Copter: make config defaults match 2.9
2013-01-02 15:27:42 +11:00
Andrew Tridgell
ead38f917f
Copter: use GRAVITY_MSS
2013-01-02 14:45:08 +11:00
Robert Lefebvre
b9594e7123
Parameters: Fixing a typo
2013-01-01 20:13:00 -05:00
Andrew Tridgell
4236b10edc
Copter: fixed board ID string
2013-01-02 10:18:05 +11:00
Andrew Tridgell
17a63dc76a
Copter: fixes for AP_HAL merge
2013-01-02 09:55:55 +11:00
Andrew Tridgell
51d987a890
Copter: removed unusued variable
2013-01-02 09:55:55 +11:00
rmackay9
9b2956b377
ArduCopter: increase throttle rate P to 6.0 (was 1.0) and alt hold P to 2.0 (was 1.0)
2013-01-02 09:55:37 +11:00
rmackay9
228ad2198f
ArduCopter: update firmware version to 2.9-rc2
2013-01-02 09:55:37 +11:00
rmackay9
2181ec2ab0
ArduCopter: log watchdog event to dataflash
2013-01-02 09:55:37 +11:00
rmackay9
16f99ebcab
ArduCopter: fix to sub system used to record failsafe in dataflash ERR message
2013-01-02 09:55:37 +11:00
rmackay9
672fdfbf71
ArduCopter: added ERR dataflash message
...
Failsafe events changed to errors so they are more obvious.
Errors recorded to dataflash for failure to init compass and optical flow sensor.
Errors recorded for pwm failure.
Resolved a compile error when dataflash logging is disabled.
2013-01-02 09:55:37 +11:00
rmackay9
677b38a48e
ArduCopter: first implementation of surface tracking using sonar
...
Note: not yet enabled as part of any flight mode
2013-01-02 09:55:37 +11:00
rmackay9
92e271e517
AP_InertialNav: increase baro delay to 0.5 sec (was 0.2sec) to allow slower baro updates on APM1
2013-01-02 09:55:37 +11:00
rmackay9
d400e5040b
ArduCopter: turn on INERTIAL_NAV_Z in the config.h file so that it takes effect when built for the mission planner
2013-01-02 09:55:37 +11:00
rmackay9
daac540e08
ArduCopter: get_throttle_althold - add check to avoid divide by zero
2013-01-02 09:55:37 +11:00
rmackay9
0decd870dc
ArduCopter: inertial nav - only initialise horizontal position when home is initialised
2013-01-02 09:55:37 +11:00
rmackay9
4c14010029
ArduCopter: update release notes for 2.9-rc1
2013-01-02 09:55:37 +11:00
rmackay9
576af6d487
ArduCopter: bug fix to althold desired rate calculation. Fix from Jonathan.
2013-01-02 09:55:37 +11:00
rmackay9
02bf3ea027
ArduCopter: Battery failsafe triggers RTL only if we are more than 15m from home, otherwise it performs a LAND
2013-01-02 09:55:37 +11:00
rmackay9
ff40fa6aab
ArduCopter: alt hold bug fix - should use 2x linear distance when calculating the desired rate
...
Bug fix from Leonard.
2013-01-02 09:55:37 +11:00
rmackay9
68b62abd38
ArduCopter with the new Camera and Relay classes for APM1 and APM2.
...
All changes by Sandro Benigno
2013-01-02 09:55:37 +11:00
rmackay9
393c893cdb
ArduCopter: bug fix (attempt #2 ) for accel based throttle controller
...
Thanks to Jonathan for this.
2013-01-02 09:25:58 +11:00
rmackay9
e583ade62d
ArduCopter: bug fix to accel based throttle controller (was using m/s instead of cm/s)
2013-01-02 09:24:31 +11:00
rmackay9
e77b54c7dc
ArduCopter: bug fix to GUIDED mode. Now checks that desired altitude was reached before deciding the waypoint is complete.
2013-01-02 09:24:31 +11:00
rmackay9
e850ab7ccd
ArduCopter: add AUTO_VELZ_MIN, AUTO_VELZ_MAX and PILOT_VELZ_MAX to allow better control of climb/descent rate in auto and manual throttle modes
2013-01-02 09:24:31 +11:00
Craig@3DR
0ed25cf719
Global change all references from
...
GPS_PROTOCOL_MTK16
to
GPS_PROTOCOL_MTK19
2013-01-02 09:24:31 +11:00
rmackay9
5526ca204c
ArduCopter: on throttle failsafe, only initiate RTL if we are at least 15m from home
2013-01-02 09:22:51 +11:00
rmackay9
466097b383
ArduCopter: use inertial nav for current altitude and climb rate
2013-01-02 09:22:51 +11:00
rmackay9
5ba363b007
ArduCopter: move gcs_check function (which sends to ground station) to run when 50hz loop is not running
...
Also removed redundant heartbeat message
2013-01-02 09:21:35 +11:00
rmackay9
331a73c4ac
ArduCopter: remove duplicate (?) send of MSG_EXTENDED_STATUS1
2013-01-02 09:20:08 +11:00
rmackay9
6baddf4aee
ArduCopter: remove unused variable last_5hz
2013-01-02 09:20:08 +11:00
rmackay9
1f5fdcdaa8
ArduCopter: remove unnecessary "Initialising APM message..."
2013-01-02 09:20:08 +11:00
Jason Short
8b62c4630b
ACM: Restore Multi-mode support
2013-01-02 09:20:08 +11:00