rmackay9
23a1e33e20
AP_InertialSensor_MPU6000: another attempt at fixing the SITL build
2012-07-28 17:19:19 +09:00
rmackay9
06a4aaa763
AP_InertialSensor_MPU6000: changed DMP memory definition (dmpMem) to const uint8_t to remove SITL compile errors (hopefully)
...
Removed unused 'dump' variable from dmp_load_mem to reduce compiler warnings
2012-07-28 16:33:04 +09:00
rmackay9
dfea845c37
AP_InertialSensor: methods added to access DMP functionality
2012-07-28 14:14:43 +09:00
Craig Elder
fe742f1c23
IMU: expose IMU_PRODUCT_ID as EEPROM Variable
...
this will allow us to log the Product ID in tlogs
2012-05-09 18:30:36 -07:00
Craig Elder
c323a71933
AP_InertialSensor: Return product ID from sensor initialization
...
this exposes the product ID to the IMU Layer
2012-05-09 18:30:36 -07:00
Craig Elder
b824a87b90
MPU6000: Fixed Scaling on Accelerometers Rev C vs Rev D
...
Rev C have non standard scaling factor that is 1/2 of the data sheet
Rev D chips conform to the specification
2012-05-09 18:30:35 -07:00
Andrew Tridgell
76a3fd9a4e
MPU6k: added suspend/resume on init
2012-05-01 12:06:54 +10:00
Andrew Tridgell
f46fba54dc
AP_InertialSensor: added a get_gyro_drift_rate() interface
...
this returns the expected max drift rate for the particular type of
gyro being used
2012-03-10 10:34:33 +11:00
Andrew Tridgell
a052aa8435
AP_InertialSensor: added new_data_available() interface
2012-03-10 10:34:28 +11:00
Randy Mackay
98f3386ea0
Arduino 1.0 - changed all #includes of "WProgram.h", "wiring.h" and "WConstants.h to "Arduino.h".
...
Modified FastSerial's write function to return size_t (number of bytes written).
2012-01-28 12:25:47 +09:00
Andrew Tridgell
1cb8728a6b
MPU6000: protect the driver from double initialisation
...
initialising twice can lockup the driver
2011-12-28 16:00:48 +11:00
Andrew Tridgell
f2bbfb1296
MPU6000: minor fixes
...
the hardware functions should be private, and cs_pin should be uint8_t
2011-12-28 16:00:48 +11:00
Andrew Tridgell
df0d151891
MPU6000: change to 98Hz low pass filter
...
based on recommendation from Pat
2011-12-26 19:17:11 +11:00
Andrew Tridgell
3ef707a2c3
MPU6000: use data ready interrupt to prevent stale data
...
We listen for a data ready interrupt and only read new data in read()
if there is new data
2011-12-26 19:17:11 +11:00
Andrew Tridgell
cef1c4c558
MPU6k: update driver for new ap_proceduce prototype
2011-12-21 23:31:38 +11:00
Andrew Tridgell
eac625ba8f
rollover is not a bug
...
subtracting unsigned numbers does the right thing
2011-12-21 23:31:38 +11:00
Andrew Tridgell
eec5f000b5
added code format markers to AP_InertialSensor library
2011-12-21 23:31:38 +11:00
Pat Hickey
6710cf5c5a
Wire and SPI Init: move to sketch system.pde from libraries
...
* Wire.begin removed from AP_Baro_BMP085::init()
* SPI.begin removed from AP_Baro_MS5611::init()
* SPI.begin removed from AP_InertialSensor_MPU6000::hardware_init()
* Both Wire.begin and SPI.begin added very early in init_ardupilot in
ArduCopter/system.pde and ArduPlane/system.pde
2011-12-11 15:21:10 -08:00
Pat Hickey
db8708911a
purple: added AP_InertialSensor library
...
this abstracts the way of getting inertial sensor (gyro and
accelerometer) data for the APM1 and purple hardware. The Oilpan code
is based closely on the old APM1 code
2011-11-25 20:00:16 -08:00