Mirror/ardupilot
5
0
Fork 0
mirror of https://github.com/ArduPilot/ardupilot synced 2025-01-04 23:18:28 -04:00
Code Issues Packages Projects Releases Wiki Activity
44,486 Commits 71 Branches 510 Tags 756 MiB
b30c55b3f3
Commit Graph

1437 Commits

Author SHA1 Message Date
Phillip Kocmoud
c192efea0a hwdef:PixracerPro - Fix analog volt pin assignments 2020-11-03 08:17:54 +11:00
Andrew Tridgell
46976c4358 HAL_ChibiOS: fixed remapping of ioline_t with BRD_ALT_CONFIG 
when a peripheral is made available via BRD_ALT_CONFIG we need to
remap the existing ioline_t in the UART and I2C drivers to use the new
pin.

This fixes an issue with half-duplex, inverted, swapped UART pins for
protocols like FPort and FPort2
 2020-10-28 19:51:45 +11:00
Andrew Tridgell
ee50eaf3c9 HAL_ChibiOS: go via AP_Filesystem for mount/unmount operations 
this fixes a deadlock where a mount/unmount could access FATFS without
holding the AP_Filesystem semaphore
 2020-10-27 10:45:03 +11:00
Andrew Tridgell
96f7397099 HAL_ChibiOS: make PowerC primary power on CUAV-X7 
CUAV considers the CAN power to be the main power for this board
 2020-10-24 08:27:21 +11:00
Michael Oborne
b383db15c7 ChibiOS: fix cubeblack+ name and usbid 2020-10-24 08:26:55 +11:00
Andrew Tridgell
fb1dcdb059 HAL_ChibiOS: added BL suffix to bootloader USB IDs for two boards 
our convention is to have -BL on end of USB product IDs in bootloaders
 2020-10-13 17:59:13 +11:00
Andrew Tridgell
418bd33c43 HAL_ChibiOS: fix CUAV-X7 power bits 2020-10-13 17:58:30 +11:00
Andrew Tridgell
25bc128248 HAL_ChibiOS: fixed periph overpower ifdef 
fixes overcurrent logging on several boards
 2020-10-13 17:58:30 +11:00
Andrew Tridgell
989f8c5d41 HAL_ChibiOS: fixed a race condition in UART DMA transmit 
this fixes an issue seen on one board which caused a watchdog on high
uart DMA load. We have reproduced the issue on another board by
forcing a very high DMA transfer rate on the same DMA channel while
also requesting very high transfer rates on the UART. The likely race
is in the DMA transmit timeout code, and the simplest fix is to lock
out interrupts during the DMA setup to ensure the tx timeout cannot
trigger during the setup
 2020-10-12 13:25:48 +11:00
bugobliterator
5880628b01 hwdef: add support for CubeBlack-periph 2020-10-08 09:31:35 +11:00
bugobliterator
e16cab0437 AP_HAL_ChibiOS: ensure we timeout while checking FDCAN register sets 2020-10-08 09:31:35 +11:00
bugobliterator
ca957519dc AP_HAL_ChibiOS: redo filter configuration to make it work with STM32H7 2020-10-08 09:31:35 +11:00
QioTek
f04de7d610 HAL_ChibiOS: Add QioTekZealotF427 build target 
I've added the hwdef to support the QioTekZealotF427

It has 3 IMU sensors(ICM20698,ICM20602,BMI055), a Compass(Ist8310),
2Baro sensors(DSP310,MS5611), an integrated analog OSD, 14motor
outputs, 4Relay output, 5uarts, 2Power Module input, an i2c, a Can.
 2020-10-05 07:41:06 +11:00
Andrew Tridgell
702a3926f8 HAL_ChibiOS: setup defines for more flow control pins 
allow all uarts to have flow control
 2020-10-03 20:22:56 +10:00
Andrew Tridgell
5e80b10396 HAL_ChibiOS: enable telem3 on Durandal 
the RCIN issue is not there in the final production boards
 2020-10-03 20:22:56 +10:00
Andrew Tridgell
e471b23f58 HAL_ChibiOS: add a max quota of GPIO interrupts 
This implements a max quota of GPIO interrupts per 100ms period to
prevent high interrupt counts from consuming all CPU and causing a
lockup. The limit is set as 10k interrupts per 0.1s period. That limit
should be high enough for all reasonable uses of GPIO interrupt
handlers while being below the level that causes significant CPU loads
and flight issues

This addresses issue #15384
 2020-10-02 09:38:24 +10:00
bugobliterator
0a4ea250ad AP_HAL_ChibiOS: disable CANFilter on H7 boards temporarily 2020-10-01 07:19:19 +10:00
Andrew Tridgell
4b747430e1 HAL_ChibiOS: save 2k in f103 bootloader 
don't include serial bl support if dev list is empty
 2020-09-24 12:32:19 +10:00
Siddharth Purohit
6fb973081b AP_HAL_ChibiOS: enable all I2C compasses by default for f103 boards 2020-09-24 12:32:19 +10:00
Andrew Tridgell
0e8c8c29a8 HAL_ChibiOS: fixed f303-MatekGPS build 2020-09-24 12:32:19 +10:00
Andrew Tridgell
246e790484 AP_Bootloader: use new hal CAN interface for CAN support 2020-09-24 12:32:19 +10:00
Siddharth Purohit
a79efaeb1d AP_HAL_ChibiOS: hwdef: add support for HAL CANIface based bootloader 2020-09-24 12:32:19 +10:00
Siddharth Purohit
882c86c394 AP_HAL_ChibiOS: add app start offset to leave space for params 2020-09-24 12:32:19 +10:00
Siddharth Purohit
1f16aa8360 HAL_ChibiOS: add hwdef for CubeOrange-periph 2020-09-24 12:32:19 +10:00
Siddharth Purohit
62df67a4b8 HAL_ChibiOS: hwdef: modify to use HAL CAN driver instead of ChibiOS's 2020-09-24 12:32:19 +10:00
Siddharth Purohit
36ffcdae30 HAL_ChibiOS: modify hal can drivers for use by AP_Periph 2020-09-24 12:32:19 +10:00
Hwurzburg
d5722b15e9 AP_ChibiOS: fix configuration number in OmnibusF7V2 hwdef 2020-09-23 07:35:22 +10:00
Hwurzburg
de8002ab5e AP_HAL_ChbiOS: ALT config to enable UART3 in place of I2C 2020-09-22 09:48:02 +10:00
Andrew Tridgell
0ba256f625 HAL_ChibiOS: fixed warning on gcc9 
packed structure can be misaligned
 2020-09-22 08:07:23 +10:00
Andrew Tridgell
90cd2a38b6 HAL_ChibiOS: fixed gcc9 warnings 2020-09-22 08:07:23 +10:00
Hwurzburg
c64f286333 AP_ChibOS: add UART7_RX to OMNIBUSF7V2 2020-09-17 10:47:18 +10:00
bugobliterator
575a56a6b6 hwdef: CubeOrange: do power reset on peripherals and sensor at boot 2020-09-16 18:08:08 +10:00
bugobliterator
a2ee82d8d9 hwdef: use inv2 sensor checks in CubeOrange 2020-09-16 18:08:08 +10:00
Andy Piper
570fd59c39 AP_HAL_ChibiOS: disable OSD parameters on F7 1Mb boards with SD cards 2020-09-10 18:10:32 +10:00
Andrew Tridgell
1ffbbb2896 HAL_ChibiOS: added FLASH_TOTAL to environment 2020-09-10 07:41:25 +10:00
Andy Piper
bbaaf7d66f AP_HAL_ChibiOS: disable features on KakuteF7 and OmnibusF7v2 to mirror KakuteF7Mini 2020-09-09 20:36:42 +10:00
Andrew Tridgell
90e488d29d HAL_ChibiOS: set airspeed type in f303-MatekGPS fw 2020-09-09 12:04:49 +10:00
Andrew Tridgell
e95a44e73c HAL_ChibiOS: run f303-MatekGPS at 10Hz 2020-09-09 06:35:50 +10:00
Andrew Tridgell
844db20db0 HAL_ChibiOS: use a default node ID for f303-MatekGPS 2020-09-09 06:35:50 +10:00
Andrew Tridgell
9c7568eb5f HAL_ChibiOS: enable MSP output for f303-MatekGPS 2020-09-09 06:35:50 +10:00
chobits
f4320c935c AP_HAL_ChibiOS: fix kakutef7/mini motor glitch when using dshot 2020-09-08 18:57:30 +10:00
vierfuffzig
63fdac0048 AP_HAL_ChibiOS: add USART3 as alt config on OmnibusNanoV6 2020-09-07 15:34:01 +10:00
Michael Oborne
4e9848ab3a HAL_ChibiOS: fix sdcard param init 
the write was failing because of a 0 byte write attempt, the response was -1 vs 0
this results in not using the sdcard backend for storage for all boots after the initial
 2020-09-04 07:13:12 +10:00
Andrew Tridgell
3a252a042b HAL_ChibiOS: fixed fast sampling on F32Lightning 
this SPI bus on this board can't handle 8MHz
 2020-09-02 06:42:44 +10:00
Andrew Tridgell
491e82159c HAL_ChibiOS: add HAL_WITH_SPI_xx defines for SPI devices 
this allows us to avoid building drivers for SPI devices we don't
have, such as OSD
 2020-09-02 05:56:46 +10:00
Siddharth Purohit
d25908a1c9 AP_HAL_ChibiOS: keep a backup of storage for last 100 boots 2020-09-01 14:31:53 +10:00
vierfuffzig
56e44c46ca AP_HAL_ChibiOS: disable IMU fast sampling on F35 / WingFC10 
fast sampling introduces random IMU glitches, bisect search identifies 9c2caf5b12 
disabling fast sampling fixes IMU back to expected behaviour. see:
https://github.com/ArduPilot/ardupilot/issues/15090
https://discuss.ardupilot.org/t/shaking-horizon-and-jittering-servos/60420
for reference
 2020-08-31 19:50:09 +10:00
Andrew Tridgell
36442dc9b0 HAL_ChibiOS: added Matek CAN GPS 
supports GPS, baro, mag and airspeed
 2020-08-25 09:59:15 +10:00
Andrew Tridgell
4c4c3d467b HAL_ChibiOS: added f103-Airspeed sensor 
for Matek CAN airspeed sensor
 2020-08-25 09:59:15 +10:00
bugobliterator
5eb0e0a718 AP_HAL_ChibiOS: fix name for RX Queue size define 2020-08-24 06:48:56 +10:00