Peter Barker
9205f379cf
autotest: increase number of parameter retries
...
sets were failing just after we uploaded very large numbers of
parameters. I'm guessing the parameter queue in ArduPilot is still
full.
2021-07-04 08:19:11 +10:00
Peter Barker
1e55b377c1
autotest: shift where we print which attempt we are doing
2021-07-04 08:19:11 +10:00
Peter Barker
10a4588f99
Tools: mark decode_watchdog.py flake8-clean
2021-07-04 08:19:10 +10:00
Peter Barker
af9f206b99
Tools: mark build_examples.py flake8-clean
2021-07-04 08:19:10 +10:00
Peter Barker
6369149217
Tool: uploader.py: flake8-clean
2021-07-04 08:19:10 +10:00
Peter Barker
09cf2cfc56
Tool: make_apj.py: flake8-clean
2021-07-04 08:19:10 +10:00
Peter Barker
919a93ccb4
Tool: pretty_size_diff.py: flake8-clean
2021-07-04 08:19:10 +10:00
Peter Barker
aae3d4d1db
Tools: decode_ISCR.py: flake8-clean
2021-07-04 08:19:10 +10:00
Peter Barker
66e8b9128a
Tools: build_iofirmware.py: flake8-clean
2021-07-04 08:19:10 +10:00
Randy Mackay
8667130db7
Tools: autotest of vibration failsafe
2021-07-04 08:19:10 +10:00
Peter Barker
55e8922c3c
autotest: correct placement of not-alive-after-test message
...
This was misplaced with bad conflict resolution
2021-07-04 08:19:10 +10:00
Peter Barker
e51631c8b0
autotest: emit 'attempt 1/3' when retrying set_parameter
...
Also reterm things in terms of attempts rather than retries
2021-07-04 08:19:10 +10:00
=
0937223c86
Tools: added name to GIT_Success.txt
2021-07-04 08:19:10 +10:00
Peter Barker
19e3e3d1a0
autotest: ensure no stray message listeners after test
2021-07-04 08:19:10 +10:00
Peter Barker
824a50999e
autotest: timeout in wallclock time in config error loop test
...
SYSTEM_TIME is not sent in config error loop
2021-07-04 08:19:10 +10:00
Peter Barker
eda7dff54d
Tools: param_metadata: disallow @Values and @Bitmask at same time
2021-07-04 08:19:10 +10:00
Peter Barker
bf80c44408
Tools: add rc channel option to disable all airspeed sensors
2021-07-04 08:19:10 +10:00
Peter Barker
f032a1d404
autotest: revert to subprocess.check_call
...
.run is only Python3
2021-07-04 08:19:10 +10:00
Peter Barker
05f5dcbed7
autotest: disable autotesting of tri frame as it is still busted
2021-07-04 08:19:10 +10:00
Peter Barker
e27015f75e
autotest: verify roll/pitch are not adversely affected by yaw inputs
2021-07-04 08:19:10 +10:00
Peter Barker
0564ba1870
autotest: ensure reasonable yawrate on takeoff in FlyEachFrame
2021-07-04 08:19:10 +10:00
Pierre Kancir
ba4634a775
AP_Common: add more unitttests
2021-07-04 08:19:10 +10:00
Peter Barker
c432e032d8
autotest: add FlyEachFrame test for Plane
2021-07-04 08:19:10 +10:00
Pierre Kancir
72f06201f9
Tools: remove more CAN stuff from coverage statistics
2021-07-04 08:19:10 +10:00
Pierre Kancir
32bb616bb5
Tools: autotest.py: total flake8 compliance.
2021-07-04 08:19:10 +10:00
Pierre Kancir
25d3659cb1
Tools: autotest: correct exception handling on unit test run.
2021-07-04 08:19:10 +10:00
Peter Barker
4a08f1334a
autotest: improve diagnostics around touchdown/takeoff expected tests
...
Also looks at last result as we don't appear to have a consistent number
in our tests
2021-07-04 08:19:10 +10:00
Peter Barker
ec1cf2f3af
autotest: let arming failure messages get spit out
2021-07-04 08:19:10 +10:00
QioTek
9ed396716b
AP_Bootloader: added QioTekZealotH743 board type
...
AP_Bootloader: added QioTekZealotH743 board type
2021-07-04 08:19:10 +10:00
Peter Barker
da785c5ba2
Tools: remove HIL support
2021-07-04 08:19:10 +10:00
Peter Barker
2494993b3b
autotest: add trivial test for smart battery logging
2021-07-04 08:19:10 +10:00
Patrick José Pereira
9211f6d351
Tools: Add navigator board in common boards
...
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2021-06-11 14:43:48 -04:00
Peter Barker
cea0d7c971
autotest: move autotest tlog files into buildlogs directory
2021-06-11 22:14:11 +10:00
Peter Barker
e77512ba08
autotest: add method to create simple relative-to-home mission
2021-06-11 16:59:51 +10:00
Peter Barker
14b2af84ab
autotest: break out a home_relative_loc_ne for getting a home-rel loc
2021-06-11 16:59:51 +10:00
Peter Barker
96e14d470a
autotest: retry SITL connect many times while running under GDB
...
Allows for easier debugging under gdb when checking startup code
2021-06-11 11:15:58 +10:00
Peter Barker
0b517cfc57
autotest: start GDB in tui mode by default
2021-06-10 20:52:48 +10:00
Tom Pittenger
4d0f5a1db6
AP_Periph: add support for multiple protocols on AP_Periph
2021-06-09 18:36:18 +10:00
Tom Pittenger
8ada37edb8
AP_Periph: add support for MPPT Battery driver
2021-06-09 18:36:18 +10:00
Peter Barker
fd792bebf8
autotest: wipe SITL state after temperature cal test
...
ArduPilot internals are fiddling state that the autotest suite is
unaware of, so wipe the eeprom after the test
2021-06-09 14:14:06 +10:00
Peter Barker
79de738266
autotest: wait for a few seconds for arm-failure messages to appear
...
If prearms never come true then we try to arm the vehicle so it tells us
what is wrong. Since we no longer push statustexts hard, we have to
wait for the reasons to come out at normal clocked rates.
2021-06-09 14:13:54 +10:00
Peter Barker
6af6d2fc2a
autotest: add a progress message for looking for a message in a log
2021-06-09 14:13:31 +10:00
Peter Barker
6944ef6af1
autotest: fly each working Helicopter frame
2021-06-09 12:15:42 +10:00
Randy Mackay
058d4299ad
Tools: update SITL tri and hexa gains
2021-06-08 19:11:32 +10:00
Andrew Tridgell
3be7f1ae23
autotest: removed tri from doesn't fly list
2021-06-08 19:11:32 +10:00
Andrew Tridgell
0876cb9cd6
autotest: fixed defaults for tricopter
2021-06-08 19:11:32 +10:00
arsh
45f1d03bda
autotest:Copter test fix for some frames
...
removed some lines
Whitespace messages removal
2021-06-08 16:50:37 +10:00
Peter Barker
31c345fc4b
Tools: add support for AP_Logger into AP_Periph
2021-06-08 09:57:55 +10:00
Peter Barker
0bd9610687
autotest: add trivial test for BodyFrameOdom
2021-06-04 15:09:51 +10:00
Peter Barker
584e24d613
Tools: build mRoControlZeroClassic and mRoControlZeroH7{,-bdshot} on build server
2021-06-04 14:39:56 +10:00