Commit Graph

2107 Commits

Author SHA1 Message Date
Andrew Tridgell 8a33e2ba37 GPS: disable auto detection of NMEA and SiRF on a 1280 board
saves a bit more flash space
2012-09-19 19:36:48 +10:00
Andrew Tridgell f3f9d644d9 AP_Airspeed: a bit more filtering
this helps reduce noise at low speed
2012-09-19 16:23:25 +10:00
rmackay9 aaab3c08aa ArduCopter: added throttle curve (although disabled by default) for all multicopters 2012-09-18 23:05:08 +09:00
Andrew Tridgell 3306ba95a7 MPU6k: save 72 bytes of memory
the buffer can be on the stack
2012-09-18 13:58:50 +10:00
Andrew Tridgell 2bc1d4a5ae SITL: prevent a fd leak in GPS code 2012-09-17 14:45:48 +10:00
Andrew Tridgell c62197370a GPS: replaced the GPS auto-detect mechanism
the old mechanism wasted most of the input bytes, and chewed a lot of
CPU, making it impractical to do GPS detection for a GPS attached
after startup

The new code is async, and detects a GPS by looking for a fully formed
packet with the right checksum for each GPS type
2012-09-17 14:45:47 +10:00
Andrew Tridgell 08cf9823fd RC_Channel_aux: minor cleanups
remove unused enable_out_ch() and enable k_manual channels. This
ensures k_manual channels used for bottle drop are initialised
correctly to trim output
2012-09-16 15:50:13 +10:00
Andrew Tridgell 644b3c6e17 RC_Channel: support channel reversal on range channels
this makes it possible to have a reverse throttle in ArduPlane
2012-09-16 15:06:26 +10:00
rmackay9 9965dd8b1a HIL: changes to fix HIL for ArduCopter after recent timing changes.
Changes include using AP_PeriodicProcess and calling imu.init even in HIL mode
2012-09-15 18:42:56 +09:00
Michael Oborne f9c11627a5 fix AP attitude hil - with randys help 2012-09-15 16:47:18 +08:00
rmackay9 54d07f6d04 ArduCopter: removed INSTANT_PWM from ArduCopter and AP_Motors library 2012-09-13 21:31:13 +09:00
rmackay9 3c0153e9dc AP_AHRS: fix to allow example sketch to compile 2012-09-13 16:45:52 +09:00
Andrew Tridgell efabf7403e GPS: NMEA bug fix from Alexey Kozin
thanks Alexey!
2012-09-12 15:04:24 +10:00
Andrew Tridgell 715541b508 AHRS: added AHRS_BARO_USE parameter
allow disabling of the use of the barometer for vertical acceleration
compensation
2012-09-12 14:42:04 +10:00
Andrew Tridgell f5efb25e62 APM: added wdt.h for SITL build of APM 2012-09-10 15:52:53 +10:00
rmackay9 8624b0138e AP_InertialSensor_Stub: added num_samples_available method to fix HIL build 2012-09-10 11:38:13 +09:00
rmackay9 d8142c2351 AP_InertialSensor_MPU6000: move _last_sample_time_micros to capture time data_interrupt was called 2012-09-10 11:38:08 +09:00
rmackay9 bd3eab7c0f AP_InertialSensor: use AP_TimerProcess's queue_process to run read from MPU6000 after any currently running processes complete 2012-09-10 11:38:03 +09:00
rmackay9 b1b3b806ad AP_PeriodicProcess: queue_process changes to suspend other processes before running queued process
Also restored suspend_timer to void return type
2012-09-10 11:37:58 +09:00
rmackay9 5a3645d36a AP_ADC: added num_samples_available to allow main loop to be synced with arrival of new sensor data for Oilpan. 2012-09-10 11:37:43 +09:00
rmackay9 38feee9c61 AP_IMU: added num_samples_available to allow main loop timing to be synced with arrival of new data from IMU. 2012-09-10 11:37:38 +09:00
rmackay9 3901387c8d AP_InertialSensor: changed read of sensor from MPU6000 to happen immediately
This reduces the delay between when data arrives and when it is used
by up to 1ms.

Added num_samples_available method to all InertialSensors to allow
main loop timing to be synced with sensors.
2012-09-10 11:37:33 +09:00
Craig Elder b667c6eb8c APM_RC: fixed noisy PWM output on startup for APM2
This reduces the number of rubbish pulses on the APM2 PWM output pins
on startup, which should help with booting some cheaper ESCs.

Thanks to Randy for the idea!
2012-09-10 08:09:28 +10:00
Andrew Tridgell 5060b8bd2e AP_Camera: updated for new RC_Channel_aux API 2012-09-08 15:13:06 +10:00
Andrew Tridgell 540f7894dc AP_Mount: updated for new RC_Channel_aux API 2012-09-08 15:12:52 +10:00
Andrew Tridgell 89dc79fded RC_Channel: simplified RC_Channel_aux and fixed issue 725
it is perfectly valid to configure two RC channels with the same
function, especially when that function is manual output (ie. copy
input to output)

This removes the g_rc_function[] indirection array
2012-09-08 15:12:28 +10:00
Andrew Tridgell 8f70a24fd4 AHRS: added AHRS_WIND_MAX option
this allows APM to cope better with airspeed sensor failure, but
ensuring airspeed stays within AHRS_WIND_MAX of ground speed
2012-09-08 11:37:07 +10:00
Andrew Tridgell c983de9d8b APM_OBC: changed termination servo values, and added loop counter 2012-09-08 11:37:00 +10:00
Andrew Tridgell 9d6bce87dc APM_OBM: Failsafe board sketch
this combines with the OBC failsafe module
2012-09-08 10:07:17 +10:00
Andrew Tridgell 8836851243 APM_OBC: handle separate terminate pin correctly 2012-09-08 10:07:14 +10:00
Andrew Tridgell 6a90b7722a OBC: added FS_TERM_PIN option
this sets a pin for flight termination
2012-09-08 10:07:08 +10:00
Andrew Tridgell 2e7939cbf4 Mavlink: enable MAVLINK_SEPARATE_HELPERS
this fixes a seq number problem with SIMSTATE packets
2012-09-08 10:06:19 +10:00
Andrew Tridgell b555d86ec0 Compass: added compass.accumulate() API
this allows us to accumulate mag readings using spare CPU cycles
2012-09-08 10:05:54 +10:00
rmackay9 20936fb87d RC_Channel_aux: bug fix which could cause channel to be assigned to the wrong function and miss others 2012-09-02 12:46:04 +09:00
Andrew Tridgell 39a4c6e861 SITL: use AP_Declination code to get right compass dec for autotest 2012-08-29 13:33:01 +10:00
Pat Hickey 0cef8ea12d APM_RC_APM1.cpp: Bugfix on mapping of SetFastOutputChannels to ICR reg
* Previously had the ICR register for ch1/2/9 (on timer5) swapped with
  ch3/4/10 (on timer1).
* This bug probably didn't make a difference in operation since
  SetFastOutputChannels is typically only used for copters, where at
  least CH1,2,3,4 would be set to fast all at once.
2012-08-28 17:12:41 -07:00
Andrew Tridgell 7ab7770c3d APM: added the ability to forcibly crash the plane on OBC failsafe breach
this allows a user to setup the OBC failsafe system to forcibly crash
the plane (surfaces at limits, zero throttle) when the failsafe system
triggers. This is to allow APM to be used in the Outback Challenge. In
the OBC an external failsafe board also does this using the heartbeat
control pin, so this is an extra safety mechanism.

To prevent users accidentially triggering a crash, this code only
activates if FS_TERM_ACTION is set to to the magic value 42.
2012-08-28 20:18:24 +10:00
Andrew Tridgell 60a6fed34a APM_OBC: don't use _saved_wp when zero 2012-08-28 20:18:23 +10:00
Andrew Tridgell fc942b2ff9 APM: removed reset_I() and instead auto-reset integrator in PID library
this prevents us resetting key integrators on waypoint change, while
still preventing old integrators being used when a PID starts to be
used again
2012-08-28 20:18:23 +10:00
Andrew Tridgell aaa4e64238 SITL: zero wind for first 15s
this allows for airspeed calibration on startup
2012-08-28 20:18:23 +10:00
rmackay9 67252c8a9b AP_InertialSensor_MPU6000: bug fix. DMP was being enabled by default so although the results were not being used, this caused a delay in the main loop 2012-08-28 17:02:07 +09:00
Craig Elder a4834b5219 Revert "APM1: Delay serial3 init to not brick Xbee radios"
This reverts commit 25d14a9d6a4a1ea60eb78485296298c98c1595d0.
2012-08-27 15:00:23 -07:00
Amilcar Lucas 90aa5f2004 ArduPlane: Fix 1280 builds
Added fine-granular features in the AP_Mount class to reduce code size on 1280 chips
Remove camera trigger support on 1280 chips
2012-08-27 01:33:45 +02:00
Amilcar Lucas 25916e9a92 Improve comments, no functional changes 2012-08-27 01:32:27 +02:00
Amilcar Lucas 18c8389c26 Improve comment aligment 2012-08-27 00:37:10 +02:00
Andrew Tridgell 7715a2b75f APM_OBC: ensure pins are setup as outputs
constructor is run before parameters are loaded
2012-08-25 17:49:26 +10:00
Andrew Tridgell be6f3aed72 AHRS: added airspeed_estimate() function
this allows the APM code to use an airspeed estimate for navigation
2012-08-25 17:49:26 +10:00
Andrew Tridgell b8decb4fd7 SITL: added SIM_WIND_* parameters
this allows control of the simulated wind during a flight
2012-08-25 17:49:26 +10:00
Craig Elder dc60fe5616 APM1: Delay serial3 init to not brick Xbee radios 2012-08-24 17:55:20 -07:00
Andrew Tridgell ba41612e7d AHRS: new functions to support APM_Control library 2012-08-22 12:42:37 +10:00
Jonathan Challinger 10505093e1 APM_Control: added new APM controllers library
See
http://www.challinger.us/2012/07/16/tuning-arduplane-roll-and-pitch-controllers/
for details
2012-08-22 12:39:07 +10:00
uncrustify d45328c98c uncrustify libraries/DataFlash/DataFlash.h 2012-08-21 19:19:52 -07:00
uncrustify a935bf77ce uncrustify libraries/DataFlash/DataFlash.cpp 2012-08-21 19:19:52 -07:00
uncrustify e233e4d625 uncrustify libraries/AP_Motors/AP_MotorsHeli.h 2012-08-21 19:19:52 -07:00
uncrustify 24943e0ea7 uncrustify libraries/AP_Motors/AP_MotorsHeli.cpp 2012-08-21 19:19:52 -07:00
uncrustify 4189870bfb uncrustify libraries/AP_Limits/AP_Limit_Geofence.cpp 2012-08-21 19:19:52 -07:00
uncrustify e49b12ca2e uncrustify libraries/AP_GPS/GPS.h 2012-08-21 19:19:52 -07:00
uncrustify c4a52a292f uncrustify libraries/AP_GPS/AP_GPS_IMU.h 2012-08-21 19:19:52 -07:00
uncrustify 89bd01f86e uncrustify libraries/AP_GPS/AP_GPS_IMU.cpp 2012-08-21 19:19:52 -07:00
uncrustify 5ed90851e3 uncrustify libraries/AP_GPS/AP_GPS_UBLOX.cpp 2012-08-21 19:19:52 -07:00
uncrustify 7de08acf09 uncrustify libraries/AP_GPS/AP_GPS_MTK16.cpp 2012-08-21 19:19:52 -07:00
uncrustify 87299da0dd uncrustify libraries/AP_GPS/AP_GPS_NMEA.h 2012-08-21 19:19:51 -07:00
uncrustify 39f71f750d uncrustify libraries/AP_GPS/AP_GPS_NMEA.cpp 2012-08-21 19:19:51 -07:00
uncrustify 924dea9a19 uncrustify libraries/AP_GPS/AP_GPS_SIRF.cpp 2012-08-21 19:19:51 -07:00
uncrustify f10307bc10 uncrustify libraries/AP_GPS/AP_GPS_406.cpp 2012-08-21 19:19:51 -07:00
uncrustify 7fa1a9d3b6 uncrustify libraries/AP_GPS/AP_GPS_MTK.cpp 2012-08-21 19:19:51 -07:00
uncrustify cf69da594f uncrustify libraries/AP_Compass/Compass.h 2012-08-21 19:19:51 -07:00
uncrustify 8f9bb7f92c uncrustify libraries/AP_Common/AP_Vector.h 2012-08-21 19:19:51 -07:00
uncrustify 66b5774f93 uncrustify libraries/AP_Common/AP_Test.h 2012-08-21 19:19:51 -07:00
uncrustify 52bc9843af uncrustify libraries/AP_Baro/AP_Baro_BMP085_hil.h 2012-08-21 19:19:51 -07:00
uncrustify f17b368e38 uncrustify libraries/AP_AHRS/AP_AHRS_HIL.h 2012-08-21 19:19:51 -07:00
uncrustify b6db467e3c uncrustify libraries/AP_AHRS/AP_AHRS.h 2012-08-21 19:19:51 -07:00
uncrustify b4571ca40b uncrustify libraries/AP_AHRS/AP_AHRS_MPU6000.h 2012-08-21 19:19:51 -07:00
uncrustify 2f0c7aeb92 uncrustify libraries/AP_AHRS/AP_AHRS_DCM.h 2012-08-21 19:19:51 -07:00
uncrustify 7dc3f26ce0 uncrustify libraries/AP_AHRS/AP_AHRS_DCM.cpp 2012-08-21 19:19:51 -07:00
uncrustify 0f0811d597 uncrustify libraries/RC_Channel/RC_Channel_aux.h 2012-08-21 19:04:32 -07:00
uncrustify bb484e81e3 uncrustify libraries/RC_Channel/RC_Channel.h 2012-08-21 19:04:31 -07:00
uncrustify 9d22cec882 uncrustify libraries/RC_Channel/RC_Channel_aux.cpp 2012-08-21 19:04:31 -07:00
uncrustify 79e1b84b4f uncrustify libraries/RC_Channel/RC_Channel.cpp 2012-08-21 19:04:31 -07:00
uncrustify a3e1c70801 uncrustify libraries/RC_Channel/examples/RC_Channel2/RC_Channel2.pde 2012-08-21 19:04:31 -07:00
uncrustify f48571cb5d uncrustify libraries/RC_Channel/examples/RC_Channel/RC_Channel.pde 2012-08-21 19:04:31 -07:00
uncrustify 922af775b4 uncrustify libraries/PID/PID.h 2012-08-21 19:04:31 -07:00
uncrustify f76768b73f uncrustify libraries/PID/PID.cpp 2012-08-21 19:04:31 -07:00
uncrustify 1ddce0cdcb uncrustify libraries/PID/examples/pid/pid.pde 2012-08-21 19:04:31 -07:00
uncrustify 062514e9c9 uncrustify libraries/memcheck/memcheck.h 2012-08-21 19:04:31 -07:00
uncrustify 70ca682a09 uncrustify libraries/memcheck/memcheck.cpp 2012-08-21 19:04:31 -07:00
uncrustify ac85440a57 uncrustify libraries/I2C/I2C.h 2012-08-21 19:04:30 -07:00
uncrustify 66948f8abb uncrustify libraries/I2C/I2C.cpp 2012-08-21 19:04:30 -07:00
uncrustify 8a53c2416d uncrustify libraries/I2C/examples/HMC5883L/HMC5883L.pde 2012-08-21 19:04:30 -07:00
uncrustify 67778c7c37 uncrustify libraries/Filter/Filter.h 2012-08-21 19:04:30 -07:00
uncrustify c09a7ea4b4 uncrustify libraries/Filter/ModeFilter.h 2012-08-21 19:04:30 -07:00
uncrustify baccb98625 uncrustify libraries/Filter/LowPassFilter.h 2012-08-21 19:04:30 -07:00
uncrustify 51346f4790 uncrustify libraries/Filter/FilterWithBuffer.h 2012-08-21 19:04:30 -07:00
uncrustify b743ed39b0 uncrustify libraries/Filter/AverageFilter.h 2012-08-21 19:04:30 -07:00
uncrustify 6bfccd13f8 uncrustify libraries/Filter/DerivativeFilter.h 2012-08-21 19:04:30 -07:00
uncrustify 973dcba9ab uncrustify libraries/Filter/DerivativeFilter.cpp 2012-08-21 19:04:29 -07:00
uncrustify e5b317cb42 uncrustify libraries/Filter/examples/Derivative/Derivative.pde 2012-08-21 19:04:29 -07:00
uncrustify 70d18ec87c uncrustify libraries/Filter/examples/Filter/Filter.pde 2012-08-21 19:04:29 -07:00
uncrustify e742a26bd5 uncrustify libraries/Filter/examples/LowPassFilter/LowPassFilter.pde 2012-08-21 19:04:29 -07:00
uncrustify 0d5ea8cd7f uncrustify libraries/DataFlash/DataFlash_APM1.h 2012-08-21 19:04:23 -07:00