Commit Graph

26210 Commits

Author SHA1 Message Date
Josh Henderson
518666b5f0 GCS_MAVLink: Add battery_charge_state to Battery_Status message 2021-06-08 09:27:13 +10:00
Andy Piper
96d0e8cf3f AP_Motors: add comments to AP_MotorsUGV 2021-06-07 20:16:26 +09:00
Andy Piper
9eea3f1030 AP_BLHeli: add auto support to rover 2021-06-07 20:16:26 +09:00
Andy Piper
7c213a8bbf AP_Motors: move AP_MotorsUGV here
add singleton and motor_mask to AP_MotorsUGV
2021-06-07 20:16:26 +09:00
Andrew Tridgell
96577b47f0 GCS_MAVLink: removed perf counters 2021-06-07 14:29:27 +10:00
Andrew Tridgell
f6ec48e0e2 AP_Scheduler: removed perf counters 2021-06-07 14:29:27 +10:00
Andrew Tridgell
50e7c81f46 AP_Logger: removed perf counters 2021-06-07 14:29:27 +10:00
Andrew Tridgell
dfc4b37df1 AP_HAL_Linux: removed perf counters 2021-06-07 14:29:27 +10:00
Andrew Tridgell
7c5c805381 AP_HAL: removed perf counters 2021-06-07 14:29:27 +10:00
Andrew Tridgell
684e32068b AP_Compass: removed perf counters 2021-06-07 14:29:27 +10:00
Peter Barker
d6348a0786 AP_NavEKF3: remove getBodyFrameOdomDebug
Not used after we moved logging to be within AP_NavEKF3
2021-06-07 09:28:52 +10:00
Peter Barker
dd3ab29b2f AP_NavEKF3: remove getFilterGpsStatus
Not needed after we moved logging into NavEKF3
2021-06-07 09:25:53 +10:00
Peter Barker
aaae7bda6b GCS_MAVLink: provide compatability with bad integer-stored radii 2021-06-06 11:41:30 +10:00
Peter Barker
76408c77dd AC_Fence: provide compatability with bad integer-stored radii 2021-06-06 11:41:30 +10:00
Peter Barker
e3db030d7a AC_Fence: load and store fence radii in floats
These were simply being cast down to integers
2021-06-06 11:41:30 +10:00
Peter Barker
e644a9dda8 StorageManager: add read_float and write_float 2021-06-06 11:41:30 +10:00
Andrew Tridgell
67fea9f2f8 HAL_ChibiOS: fixed DMA disable on contention
this fixes a problem with the automatic DMA disable on DMA contention
in UARTs. This fixes issue #14581

the problem was that while tx_dma_enabled was correctly set to false,
it would keep looping inside write_pending_bytes_DMA() if the data
arrived in the write buffer at a faster rate than it could be sent
out, which did happen with a mavlink stream rate of 4Hz. This means it
kept using DMA even with tx_dma_enabled set to false. The result was
that the automatic flow control code never got a chance to run and we
didn't switch back to non-DMA for these low baudrate contended UARTs
2021-06-05 19:03:03 +10:00
Andrew Tridgell
3128d71aac HAL_ChibiOS: display uart even when not initialised
don't rely on thread allocation for uart info display
2021-06-05 18:52:33 +10:00
Andrew Tridgell
c34d8e80e9 HAL_ChibiOS: fixed serial info indexing for EMPTY uarts 2021-06-05 18:52:33 +10:00
Andrew Tridgell
6fab8feeae HAL_ChibiOS: implement uart_info per-uart
this allows for some UARTs to be of EMPTY type
2021-06-05 18:52:33 +10:00
Andrew Tridgell
23cf128541 HAL_Empty: implement uart_info() 2021-06-05 18:52:33 +10:00
Andrew Tridgell
d8a6d9c5c4 AP_HAL: added uart_info() method 2021-06-05 18:52:33 +10:00
Andrew Tridgell
135a4d2c83 HAL_ChibiOS: fixed order and labelling of @SYS/uarts.txt 2021-06-05 18:52:33 +10:00
Andrew Tridgell
71f207403e AP_Common: make angles in degrees end in _deg
to make it obvious it is not radians
2021-06-05 13:05:30 +10:00
Andrew Tridgell
eba1d499d4 AP_SpdHgtControl: added get_max_sinkrate() 2021-06-05 13:05:30 +10:00
Andrew Tridgell
a789bb372b AP_TECS: added get_max_sinkrate() API 2021-06-05 13:05:30 +10:00
Andrew Tridgell
a895bc1846 HAL_ChibiOS: reduce flash on VRBranin-v51 2021-06-05 13:05:30 +10:00
Andrew Tridgell
154ae64e63 AP_Math: support either polarity in linear_interpolate() 2021-06-05 13:05:30 +10:00
Peter Barker
d77d258442 AP_Math: add tests for the sqrt_controller 2021-06-04 23:00:19 +10:00
yaapu
c615706971 AP_Frsky_Telem: added a parameter to set the default FRSky sensor ID for passthrough telemetry 2021-06-03 13:58:55 +10:00
honglang
847ce3b311 AP_HAL_ChibiOS: CUAV X7/Nora: use icm42688 instead of bmi088 2021-06-03 13:57:27 +10:00
Randy Mackay
3f77c52720 AP_BoardConfig: minor change to BRD_IMU_TARGTEMP param desc
Users should reboot if the param is changed to -1 because the heater pin could be left on
2021-06-02 18:17:59 +10:00
yaapu
870c280946 AP_Frsky_Telem: upgraded SERIAL_PROTOCOL 4 telemetry to 2 bytes data IDs
This upgrades standard SPort telemetry from older 1byte IDs to newer 2bytes IDs.

Older 1 byte data IDs are not supported by the FRSky ETHOS ecosystem so this
migration is required to allow ArduPilot to seamlessly work with ETHOS.
This migration requires users to do a new sensor discovery in OpenTX.
2021-06-02 17:33:15 +10:00
yaapu
a5e1a45e7a AP_Frsky_Telem: added hud throttle [-100,100] to frame 0x5001 scaled to [-63,63] on 7bits 2021-06-02 17:30:09 +10:00
Siddharth Purohit
cd5b764fd8 AP_NavEKF3: use first usable compass index to set magSelectIndex 2021-06-02 17:10:19 +10:00
Siddharth Purohit
124eaf1a38 AP_NavEKF2: use first usable compass index to set magSelectIndex 2021-06-02 17:10:19 +10:00
Siddharth Purohit
a52f04ddde AP_DAL: add interface for first usable compass 2021-06-02 17:10:19 +10:00
Siddharth Purohit
1d29619e51 Revert "AP_Arming: check for only first compass being disabled"
This reverts commit d343c569c2.
2021-06-02 17:10:19 +10:00
Siddharth Purohit
8590bfea63 AP_Compass: use first available compass in priority list 2021-06-02 17:10:19 +10:00
James O'Shannessy
1794eefd33 AP_Mission: Fixes crash in copter when uploading MAV_CMD_NAV_LAND with NaN as p4
Uploading a mission created in QGC with MAV_CMD_NAV_LAND (instead of return to launch) results in crash of copter because p4 is not set.
2021-06-02 17:04:38 +10:00
Andrew Tridgell
606c248e69 AP_HAL: fixed build on boards with no PWM
this impacts mRoNexus builds
2021-06-02 15:39:30 +10:00
Paul Riseborough
a5a25411da AP_NavEKF3: Remove unnecessary baro limiting 2021-06-02 11:13:16 +09:00
Paul Riseborough
124f016e5b AP_NavEKF3: Use parameter to set baro ground effect dead-zone 2021-06-02 11:13:16 +09:00
Paul Riseborough
76d0dcc25c AP_NavEKF3: Use common method for handling baro ground effect 2021-06-02 11:13:16 +09:00
Andrew Tridgell
dc9435a88d AP_NavEKF3: don't limit baro change when we are in fixed wing mode 2021-06-02 11:13:16 +09:00
Andrew Tridgell
ea6724aca5 AP_NavEKF2: don't limit baro change when we are in fixed wing mode 2021-06-02 11:13:16 +09:00
Andrew Tridgell
32b079911f AP_NavEKF2: use DAL APIs for takeoff/touchdown expected 2021-06-02 11:13:16 +09:00
Peter Barker
c00f110f3d AP_NavEKF3: use DAL APIs for takeoff/touchdown expected 2021-06-02 11:13:16 +09:00
Peter Barker
f4f713a04f AP_DAL: add takeoff and touchdown expected state 2021-06-02 11:13:16 +09:00
Peter Barker
9eeec61cec AP_AHRS: new APIs for takeoff/touchdown expected
timeout handling now in AP_AHRS, and state stored in AHRS and
requested by AP_DAL
2021-06-02 11:13:16 +09:00
CUAVcaijie
0ff38e1379 HAL_ChibiOS: CUAV ICM20649 on SPI6 bus replaced by ICM20689
alternative IMUs for Nora and X7
2021-06-02 10:49:55 +10:00
Andrew Tridgell
8701932670 HAL_ChibiOS: return zeros in dma.txt on first fetch 2021-06-01 11:36:07 +09:00
James O'Shannessy
89e4df485a AP_BattMonitor: Record and report UAVCAN Battery Info temperature correctly 2021-06-01 12:35:24 +10:00
Iampete1
c71163680f SRV_Channel: add motor 1 - 4 to Rover function description, used on OMI frame type. 2021-06-01 11:12:40 +09:00
vierfuffzig
bed7d5f125 AP_OSD: add rangefinder panel 2021-06-01 11:33:05 +10:00
Peter Barker
15658362b5 AP_NavEKF3: make time-horizon OF data a local variable
Saves 40 bytes of RAM per core on stm32
2021-06-01 09:56:19 +10:00
Dr.-Ing. Amilcar do Carmo Lucas
0dbd05505b AP_BLHeli: Remove duplicated code, use existing AP_Math CRC function 2021-06-01 09:27:29 +10:00
Andrew Tridgell
5529ba36e2 HAL_ChibiOS: added HolybroGPS AP_Periph port 2021-06-01 09:19:51 +10:00
Andrew Tridgell
23c0f257b6 HAL_ChibiOS: default off serial protocols in AP_Periph
this allows for a GPS on high numbered ports
2021-06-01 09:19:51 +10:00
Andrew Tridgell
14dca255a4 AP_Notify: fixed probe on all internal NCP5623 LEDs 2021-06-01 09:19:51 +10:00
Andrew Tridgell
ac1e03e16a HAL_ChibiOS: move heater gains on CubeOrange to hwdef.dat
this makes it easier for users using apjtool to override params
2021-06-01 08:07:49 +10:00
Andrew Tridgell
244d896bfb HAL_ChibiOS: enable heater on Pix32v5 2021-06-01 08:07:49 +10:00
Andrew Tridgell
c2a13213ae AP_BoardConfig: allow for hwdef.dat setting for IMU heater gains 2021-06-01 08:07:49 +10:00
Andrew Tridgell
d5dccaa734 AP_Compass: added heater compensation to internal mag for Pix32v5 2021-06-01 08:07:49 +10:00
Hwurzburg
27620322ec AC_AttitudeControl: remove % as units on params that are unitless 2021-05-30 22:38:27 -07:00
James Harton
be3cc1b679 Docs: Change all references from dev.ardupilot.org to the appropriate documentation URLs. 2021-05-31 12:20:45 +10:00
bugobliterator
ea1795d6fe AP_HAL_ChibiOS: ensure ToneAlarm is not disabled when UAVCAN is available 2021-05-31 07:34:02 +10:00
bugobliterator
b7de9feb56 AP_Notify: ensure ToneAlarm is not disabled when UAVCAN is available 2021-05-31 07:34:02 +10:00
bugobliterator
ae80e2dd4d AP_HAL: move ToneAlarm Types to AP_Notify instead 2021-05-31 07:34:02 +10:00
Tatsuya Yamaguchi
e63918d9ba RC_Channel: refactor KILL_IMU of do_aux_function 2021-05-30 11:33:47 +10:00
Peter Barker
e141578376 AP_AHRS: remove optical flow pointer from AP_AHRS
Nothing was ever using it.
2021-05-30 10:44:42 +10:00
Peter Barker
28bbe4b776 AP_AHRS: remove unused AP_Beacon.h include 2021-05-30 10:44:42 +10:00
Patrick José Pereira
b608ceb6ed AP_HAL_SITL: Return zero when using the help command
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2021-05-29 11:27:37 +10:00
Hwurzburg
158c7c499d AC_WPNav: correct param ranges to accomodate TradHeli defaults 2021-05-28 09:44:11 +09:00
Hwurzburg
3f4d4e45fc AC_AttitudeControl: correct param ranges to accomodate TradHeli defaults 2021-05-28 09:44:11 +09:00
Randy Mackay
02f6ca51bc AP_NavEKF3: init rngOnGnd to 5cm to avoid div-by-zero 2021-05-28 08:08:08 +09:00
Michael Oborne
126456742a Hwdef: add Joey 2021-05-27 14:19:55 +10:00
Peter Barker
09f4961a63 GCS_MAVLink: increase statustext queue size to 7 on low-mem boards
... and SITL....

Copter currently spits out so many messages on a banner-send (e.g what
we do when parameters are fetched) that it puses the first sent message
straight out of the queue before it gets a chance to be sent from the
queue.
2021-05-27 12:39:04 +10:00
Andrew Tridgell
91dce554d1 HAL_ChibiOS: removed unnecessary USB product IDs from boards 2021-05-27 09:30:30 +09:00
Andrew Tridgell
de3a3f7edf HAL_ChibiOS: fixed case of Pix32v5 USB product string 2021-05-27 09:30:30 +09:00
Michel Pastor
468838ff7f AP_OSD: do not show hgt_abvterr and fence elements by default 2021-05-26 19:01:56 +10:00
Randy Mackay
d9c68031fa AC_PosControl: write_log checks xy and z controllers are active
This allows write_log to be write PSCZ messages for modes with onlyi vertical control (e.g. althold) without also logging out-of-date PSC messages
2021-05-26 18:58:31 +10:00
Michel Pastor
f4e2d462f7 AP_MSP: Telem_Backend: do not round vertical speed to 1m/s 2021-05-26 18:33:27 +10:00
bugobliterator
0172b867b7 AP_Compass: fix "no detected backends" error with single compass 2021-05-26 18:30:45 +10:00
Siddharth Purohit
ad9a8c8bd9 AP_HAL_ChibiOS: record error states in CANFDIface and CANIface 2021-05-26 18:25:01 +10:00
Michel Pastor
b083848ae7 AP_HAL_ChibiOS: fix comments 2021-05-26 17:59:04 +10:00
Michel Pastor
a148849ec3 AP_HAL_ChibiOS: RCOutput_serial: fix comment for set_reversible_mask() 2021-05-26 17:59:04 +10:00
Siddharth Purohit
643fc77323 SITL: fix labs on unsigned value subtraction 2021-05-26 17:40:19 +10:00
Siddharth Purohit
2e41077347 AP_RangeFinder: fix using labs on unsigned value subtraction 2021-05-26 17:40:19 +10:00
Michel Pastor
0090d8b1c0 AP_MSP: Telem_Backend: fix temperature 2021-05-26 17:34:57 +10:00
Michel Pastor
1b84852d79 AP_OSD: fix BLH elements 2021-05-26 17:33:54 +10:00
Leonard Hall
359cf8ed0e AC_AttitudeControl: Rename set_attitude_target_to_current_attitude 2021-05-26 16:03:05 +09:00
Leonard Hall
fb83f98b77 AC_AttitudeControl: Set rates to zero during arming procedure for acro 2021-05-26 16:03:05 +09:00
Leonard Hall
34e342f658 AC_AttitudeControl: Rename set_yaw_target_to_current_heading 2021-05-26 16:03:05 +09:00
Leonard Hall
b489dd5fe1 AC_AttitudeControl: Set yaw rate to zero during arming procedure 2021-05-26 16:03:05 +09:00
murata
e9686b77b5 AP_VisualOdom: Change the GCS message level to INFO 2021-05-26 10:53:43 +09:00
Tatsuya Yamaguchi
f2acad4099 AP_VisualOdom: use get_yaw instead of to_axis_angle 2021-05-25 20:19:24 +09:00
vierfuffzig
b922181f63 AP_Landing: fix advanced param metadata 2021-05-25 12:36:59 +10:00
Hwurzburg
faf4993436 AP_Fence: add pre-arm check for fence enabled but none selected 2021-05-25 12:36:21 +10:00
Andrew Tridgell
cd43c0ecef APM_Control: use FF to increase but not reduce tau in autotune
if user wants a slow time constant we should not override
2021-05-25 12:14:38 +10:00