Andrew Tridgell
f441223b55
HAL_ChibiOS: implement updated NeoPixel API
...
allow for N leds per chain, and setting separate colours per led in
each chain
2019-09-10 13:03:28 +10:00
Tom Pittenger
e3416b66dc
AP_HAL_ChibiOS: add Neopixel output type, similar to dshot
2019-09-10 13:03:28 +10:00
Andrew Tridgell
8dd58b4181
HAL_ChibiOS: support reversible DShot motors
2018-11-16 08:33:35 +11:00
Peter Barker
17f643719a
AP_HAL_ChibiOS: add override keyword in many places
2018-11-08 11:30:12 +11:00
Andrew Tridgell
81fe8b7138
HAL_ChibiOS: allow set of safety mask from IOMCU
2018-11-07 07:35:45 +11:00
Siddharth Purohit
87a2dea9d4
HAL_ChibiOS: disable features that require advanced dma
2018-09-19 12:14:15 +10:00
Andrew Tridgell
8c33b4b97d
HAL_ChibiOS: implement set_failsafe_pwm()
2018-09-13 08:15:02 +10:00
Andrew Tridgell
3df2a1c228
HAL_ChibiOS: fixed dshot bad frames
...
adding a pre-bit on the DMAR, and ensuring that all groups are setup
for DMA together fixes the remaining bad frames reports in BLHeli32
2018-08-04 19:29:13 +10:00
Andrew Tridgell
946b4db0e6
HAL_ChibiOS: set min dshot separation to 100usec
...
this fixes a problem with BLHeli32 not recognising dshot
2018-08-04 19:29:13 +10:00
Andrew Tridgell
22ba9a0aea
HAL_ChibiOS: fixed timeout of serial read bytes
...
this allows for fast timeout of serial read bytes in BLHeli pass-thru
2018-08-04 19:29:13 +10:00
Andrew Tridgell
7e897c16c0
HAL_ChibiOS: maintain rcout state beyond BRD_PWM_COUNT
...
allow channels beyond BRD_PWM_COUNT to be sent over SBUS or DShot
distribution
2018-05-26 12:08:54 +10:00
Andrew Tridgell
794ebe32e3
HAL_ChibiOS: fixed mixture of oneshot and normal PWM on IOMCU
2018-05-12 07:28:05 +10:00
Andrew Tridgell
bb0cbd15a4
HAL_ChibiOS: implement fmuv4 safety state
...
and added safety_mask and safety_pwm support for both fmuv3 and fmuv4
2018-04-17 10:14:01 +10:00
Andrew Tridgell
4871bbf403
HAL_ChibiOS: make soft serial for RC serial more efficient
...
using system ticks halves the IRQ time
2018-04-16 07:40:55 +10:00
Andrew Tridgell
71cd58cc7e
HAL_ChibiOS: run rc serial thread at top priority
...
this maximises reliability for serial IO to ESCs, increasing flashing
reliability
2018-04-07 09:10:29 +10:00
Andrew Tridgell
3cd4f2a002
AP_ChibiOS: handle oneshot125 separately
...
this sets up oneshot125 with the full 1000 steps of throttle
resolution, using a 8MHz clock. This matches the behaviour of modern
ESCs that measure PWM values with high accuracy
2018-04-07 09:10:29 +10:00
Andrew Tridgell
8e59f6aad6
HAL_ChibiOS: implement get_esc_scaling()
2018-04-07 09:10:29 +10:00
Andrew Tridgell
6fd0af11ef
HAL_ChibiOS: implement telem request API
2018-04-07 09:10:29 +10:00
Andrew Tridgell
6bdb523630
HAL_ChibiOS: guarantee 1kHz output for DShot
2018-04-07 09:10:29 +10:00
Andrew Tridgell
382772d999
HAL_ChibiOS: initial support for ESC serial output
2018-04-07 09:10:29 +10:00
Andrew Tridgell
26d279e165
HAL_ChibiOS: improve DShot timing accuracy
2018-04-07 09:10:29 +10:00
Andrew Tridgell
bc32276966
HAL_ChibiOS: support DShot output
...
use DMAR burst DMA to minimise number of DMA channels needed
thanks to betaflight for the great reference implementation!
2018-04-07 09:10:29 +10:00
Andrew Tridgell
306d35655e
HAL_ChibiOS: allow for bare board builds
...
this allows for a build with no UARTs, no SPI, no I2C, no PWM. Great
for initial board bringup with just USB
2018-03-02 12:52:50 +11:00
Andrew Tridgell
0cf104f2f3
HAL_ChibiOS: added scale_esc_to_unity()
...
needed for per-motor compass cal
2018-03-02 12:52:50 +11:00
Andrew Tridgell
7c23e33775
HAL_Chibios: set min output rate for oneshot to 100Hz
...
this will keep ESCs happy during gyro cal
2018-01-20 17:40:07 +11:00
Andrew Tridgell
880a84294e
HAL_ChibiOS: support oneshot mode
...
supports oneshot 125 and oneshot
2018-01-20 17:40:07 +11:00
Andrew Tridgell
f14a847b97
HAL_ChibiOS: rename classes to remove 'Chibi'
...
it is redundent as all classes are in ChibiOS namespace, and makes the
code harder to read
2018-01-15 11:46:02 +11:00
Andrew Tridgell
25b68dc150
HAL_ChibiOS: switch base freq when needed
...
timers can't do below 123 Hz with a clock of 8MHz, so we need to
change clock frequency based on the target period
2018-01-15 11:46:02 +11:00
Andrew Tridgell
d17e9f321a
HAL_ChibOS: fixed mixture of brushed and normal PWM
...
allow non-brushed PWM servos with brushed main motors
2018-01-15 11:46:02 +11:00
Andrew Tridgell
c639708e22
HAL_ChibOS: auto-generate full PWM config
...
use PWM markers in hwdef.dat to mark each PWM channel
2018-01-15 11:46:02 +11:00
Andrew Tridgell
3a004adbd4
HAL_Chibios: use macro for NUM_GROUPS
2018-01-15 11:46:02 +11:00
Andrew Tridgell
26d6947bf6
HAL_ChibiOS: fixed PWM output
2018-01-15 11:46:02 +11:00
Andrew Tridgell
8b6bab7b17
HAL_Chibios: added ChibiOS HAL
...
this is based on initial work by Sid, reset here for easier merging
2018-01-15 11:46:02 +11:00