Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
16,466 Commits 71 Branches 509 Tags 763 MiB
Commit Graph

38 Commits

Author SHA1 Message Date
Andrew Tridgell 18131eae13 HAL_PX4: added delay_microseconds_boost() 
implemented using hrt callback with sem_post wrapper
 2015-02-16 12:19:13 +11:00
Andrew Tridgell 7f0060b881 HAL_PX4: reduce the amount of time between loop() calls 
500usec is too long for 400Hz copter
 2015-02-14 12:25:43 +11:00
Andrew Tridgell f2a919c55e AP_HAL_PX4: moved size of main thread stack to Scheduler.h 
make it more obvious
 2015-02-07 08:06:53 +11:00
Andrew Tridgell 849c4905fb HAL_PX4: print overtime message on stuck task 
this should make it easier to narrow down stuck task bugs
 2014-07-03 09:11:24 +10:00
Andrew Tridgell 5f85e7af6a HAL_PX4: switch to new serial port for 2nd GPS 2014-03-04 20:34:44 +11:00
Andrew Tridgell bf2dd141e9 HAL_PX4: support uartE for 2nd GPS 2014-02-26 08:18:11 +11:00
Andrew Tridgell f433796435 HAL_PX4: removed an unused variable 2013-12-11 10:22:34 +11:00
Andrew Tridgell 0b25ff0a16 HAL_PX4: added uartD 2013-11-23 19:29:22 +11:00
Andrew Tridgell 5800c2a2c8 HAL_PX4: prevent excessive writes on startup from blocking 
this could cause copter on PX4 to hang on startup
 2013-10-28 16:12:44 +11:00
Andrew Tridgell 1c091cbca5 HAL_PX4: fixed a scheduler bug that affects UART IO 
we need to detect if we are in a timer task using a PID, not a
flag. This is the same type of bug I fixed last week, but now fixed
properly.

The bug could well be the "USB bug" that Craig has been chasing
 2013-10-19 16:50:38 +11:00
Andrew Tridgell d973730b88 HAL_PX4: use hrt timer and semaphores to improve timing 
this gives much more accurate microsecond delays, while also ensuring
we yield the CPU when possible
 2013-10-14 08:29:30 +11:00
Andrew Tridgell 63bee0b2d8 HAL_PX4: disable checks for in_timerprocess 
these are not valid in this form for the way the timer thread works on
PX4.
 2013-10-11 16:06:35 +11:00
Andrew Tridgell 7cab8cb3bb HAL_PX4: removed Console driver 2013-10-05 18:33:07 +10:00
Julian Oes 56e94d70e9 PX4: Adaptations to latest build changes 2013-08-30 13:01:32 +10:00
Marco Bauer a3b216bce3 HAL_PX4: added GPIO driver 2013-07-11 13:50:22 +10:00
Andrew Tridgell 02c5c3ec4a HAL_PX4: changed scheduler priorities 
put sensor priority above main sketch, to prevent occasional blocking
for sensor data
 2013-02-20 11:30:54 +11:00
Andrew Tridgell 8e2a20bea8 HAL_PX4: enable ttyACM0 as main console, ttyS1 as telemetry port 2013-02-18 13:55:33 +11:00
Andrew Tridgell d7409b6a25 HAL_PX4: startup in low priority to fix CLI 
this ensures that tight sensor loops in setup() can run without
sleeping
 2013-01-25 20:44:36 +11:00
Andrew Tridgell f9d43f4c3e HAL_PX4: prevent loop() overruns using hrt 
this ensures if loop() takes more than 1 second, the main task gets
its priority dropped until loop() completes
 2013-01-24 15:04:57 +11:00
Andrew Tridgell 952df2fced HAL_PX4: new buffered storeage driver for microsd cards 
this does all IO in the timer thread, avoids writes that don't change
data, and does all writes in multiples of 128 byte chunks. This should
be about as friendly to SD cards as we can get.
 2013-01-23 16:37:40 +11:00
Andrew Tridgell 2a10727902 HAL_PX4: run timer thread as SCHED_FIFO 
this ensures it never yields to the main thread, which would break our
locking assumptions
 2013-01-23 09:21:50 +11:00
Andrew Tridgell 06e63d3167 HAL_PX4: use pthread_yield() in main loop 
this lowers the latency of the main loop somewhat
 2013-01-23 07:36:13 +11:00
Andrew Tridgell 1188c9e335 HAL_PX4: added Util instance 
this fixes hal.util->vsnprintf_P()
 2013-01-21 17:10:42 +11:00
Andrew Tridgell 52f560a4c2 HAL_PX4: enabled AnalogIn driver 2013-01-21 13:56:57 +11:00
Andrew Tridgell 0655b1a925 HAL_PX4: fixed thread_running on failed startup 2013-01-20 22:13:20 +11:00
Andrew Tridgell bd9c61562f HAL_PX4: added -d command line option to app 
allows control of serial device
 2013-01-14 16:21:27 +11:00
Andrew Tridgell 7c7a215934 HAL_PX4: fixes for new Scheduler API 2013-01-11 12:25:26 +11:00
Andrew Tridgell 5ac23d358f HAL_PX4: update for new i2cdriver interface 2013-01-07 11:05:30 +11:00
Andrew Tridgell 0fcc6d7389 HAL_PX4: added an RC Output driver 2013-01-04 22:25:36 +11:00
Andrew Tridgell 965fc8a9d1 HAL_PX4: enable uartB as GPS port 2013-01-04 19:41:50 +11:00
Andrew Tridgell 155fca8a4b HAL_PX4: make APM sketches into daemons 
this also moves uartA onto UART5, allowing ttyS0 for nsh
 2013-01-04 11:14:35 +11:00
Andrew Tridgell 38bccee230 HAL_PX4: initial RCInput driver (overrides only) 2013-01-03 21:30:35 +11:00
Andrew Tridgell d492b72a2c HAL_PX4: use /dev/ttyS0 for uartA 
this also changes txspace and available to use FIONWRITE and FIONREAD
 2013-01-03 21:12:10 +11:00
Andrew Tridgell ac7117245a HAL_PX4: added a storage driver 
stores 'eeprom' to a sdcard file
 2013-01-03 19:35:05 +11:00
Andrew Tridgell 9373a4e5b3 HAL_PX4: added a uartA driver 
uses stdin/stdout for IO
 2013-01-03 11:03:05 +11:00
Andrew Tridgell 5a70f3becf HAL_PX4: added a scheduler implementation 2013-01-02 21:39:26 +11:00
Andrew Tridgell da10e68e87 HAL_PX4: added basic console driver (output only) 2013-01-01 18:19:18 +11:00
Andrew Tridgell b41440175f HAL_PX4: started on new PX4 HAL structures 2012-12-30 20:02:45 +11:00