Commit Graph

138 Commits

Author SHA1 Message Date
Andrew Tridgell
7716754c61 Revert "AP_RCProtocol: change default SBUS frame gap to 4ms"
This reverts commit af9e96c619.

revert as this causes a problem on some receivers such as the Frsky R9

fixes #19899
2022-02-11 08:10:25 +11:00
Andrew Tridgell
af9e96c619 AP_RCProtocol: change default SBUS frame gap to 4ms
this is to cope with some newer receivers such as the skydroid H16
which produces SBUS frames with gaps over 2ms

without this change we get can RC failsafes constantly
2022-01-29 15:09:29 +11:00
yaapu
55bfa41d13 AP_RC_Protocol: added ExpressLRS support 2021-12-22 18:48:49 +11:00
yaapu
76bd10bf02 AP_RCProtocol: added custom telemetry frame types and subtypes to debug trace 2021-12-22 18:48:49 +11:00
Andrew Tridgell
47590a55ff AP_RCProtocol: allow changes of serial settings between protocols
if we are searching for new protocols then allow for baudrate table
changes
2021-12-21 11:07:44 +11:00
Jaaaky
91e3441c6d AP_RCProtocol: Fix multi #include's 2021-12-21 10:38:46 +11:00
Hwurzburg
eaa557106a AP_RCProtocol: add RC option to report CRSF LQ as RSSI
Co-author: Jules Gilson <julesgilson@yahoo.co.uk>
2021-12-21 10:04:33 +11:00
Andy Piper
5224468ec6 AP_RCProtocol: process CRSF crc per-byte 2021-12-01 19:04:19 +11:00
Peter Barker
409147a291 AP_RCProtocol: add support for DJI Fast SBUS
It's just SBUS... but with increased opportunities for corruption
2021-11-18 17:19:04 +11:00
Peter Barker
411ed0f50e AP_RCProtocol: use data structure for serial configurations 2021-11-16 22:06:24 +11:00
Peter Barker
c1cdfb448c AP_RCProtocol: move uart flow control set out of CRSF code
11:32 AM] AndrewTridgell: @Peter Barker we should disable flow control when we first add the uart - none of the RC protocols use flow control
[11:32 AM] AndrewTridgell: the blocking writes call isn't needed
[11:32 AM] Peter Barker: Thanks, I'll make a patch.
2021-11-16 22:06:24 +11:00
Peter Barker
5e18f98b8e AP_RCProtocol: number all of the RC Protocols supported
Needed this as soon as we got the RC_PROTOCOL bitmask
2021-11-12 09:00:45 +11:00
Peter Barker
7c774d02bb AP_RCProtocol: remove pointless 100kbaud speed change
added.opened is set to false.  Next time we check_added_uart, the baud
rate is unconditionally set in each of the phases.  Thus this line has
no effect except to confuse the reader
2021-11-10 07:04:47 +11:00
Peter Barker
63f87a863c AP_RCProtocol: use switch statement for 3-frame check
Forces new protocol implementer to consider whether a 3-frame check is
required
2021-11-09 09:06:45 +11:00
Andrew Tridgell
67fd862a8c AP_RCProtocol: check for RC protocol switching enable
by default don't allow protocol switching after initial protocol is
found
2021-10-15 19:29:23 -04:00
Andrew Tridgell
d8c0d82857 AP_RCProtocol: allow DSM bind using uart RX pin directly 2021-10-12 15:47:51 +11:00
Andy Piper
8035b92e6e AP_RCProtocol: increase CRSF frame timeout to account for scheduling delays 2021-08-31 08:18:32 +10:00
Andrew Tridgell
0bdbdcec21 AP_RCProtocol: mark logger Write() calls as streaming where appropriate 2021-08-18 10:20:03 +10:00
Andrew Tridgell
36dcc0d16d AP_RCProtocol: make SBUS frame gap configurable 2021-08-10 10:08:05 +10:00
Andy Piper
293bb7704e AP_RCProtocol: implementation of CRSF v3
add CRSF command frame types
allow CRSF baud rate changes
record CRSF version being processed
2021-08-04 17:26:18 +10:00
Hwurzburg
c5f53fc0b6 AP_RCProtocol: add Link Quality reporting to RC protocols 2021-07-16 13:27:38 +10:00
Andy Piper
dd310fd12f AP_RCProtocol: move AP_VideoTX to AP_VideoTX 2021-02-23 11:43:32 +11:00
Patrick José Pereira
8f96580e9d AP_RCProtocol: Add missing const in member functions
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2021-02-03 18:45:14 +11:00
Andy Piper
881fd4f37c AP_HAL_ChibiOS: use buffered writes for CRSF telemetry 2021-02-03 18:28:28 +11:00
Andy Piper
f6a2d20579 AP_RCProtocol: add tracer 250Hz mode 2021-01-20 18:06:24 +11:00
yaapu
5ef20aec27 AP_RCProtocol: added support for passthrough telemetry over crossfire 2021-01-20 18:06:24 +11:00
Andy Piper
27d7c73c8e AP_RCProtocol: rc_protocols_mask must be set before bootstrap occurs 2021-01-04 20:04:19 +11:00
Andrew Tridgell
9fcf36bad9 AP_RCProtocol: save memory in IO firmware
disable FPort2 to save memory.
Disable SBUS_NI as it is not needed on IOMCU as it has a dedicated
inverter
2020-12-28 08:27:23 +11:00
Andy Piper
e6d0e38129 AP_RCProtocol: allow handshake to initiate RC connection. Support listen-only SRXL2 devices.
only bootstrap when SRXL2 is the only configured protocol (RC_PROTOCOLS=256)
remove spurious 0 initializers
2020-12-16 18:06:49 +11:00
yaapu
c530df7e31 AP_RCProtocol: added fport2 24ch test 2020-12-01 15:05:02 +11:00
yaapu
7e9458b53a AP_RCProtocol: fport2 fixes
Fixed 16ch fport2 telemetry and enabled bidir support.
Fixed 24ch fport2, had to disable telemetry on 24ch for timing is too tight and telemetry would be unreliable.
2020-12-01 15:05:02 +11:00
Andy Piper
7f3f135dc5 AP_RCProtocol: add debug for further CRSF messages
add better frame debug info to CRSF
2020-11-11 18:13:11 +11:00
Andrew Tridgell
2dd58c8ed1 AP_RCProtocol: send null pkts for FPort2
when we have no data to send, we should send an empty packet to ensure
the receiver schedules us for data as often as possible
2020-10-28 19:51:45 +11:00
Andrew Tridgell
20c4f1950b AP_RCProtocol: added FPort protocol test 2020-10-28 09:00:34 +11:00
Andrew Tridgell
df5105e20b AP_RCProtocol: added FPort2 protocol test 2020-10-28 09:00:34 +11:00
Andrew Tridgell
a8770a5a82 AP_RCProtocol: added FPort2 protocol support 2020-10-28 09:00:34 +11:00
yaapu
4dec72a230 AP_RCProtocol: added support for frsky fport bidirectional telemetry 2020-10-27 10:17:53 +11:00
yaapu
f33d197b16 AP_RCProtocol: fix fport rssi 2020-09-29 09:04:38 +10:00
Andy Piper
1f3c24d436 AP_RCProtocol: put back DSM VTX control and logging, add tests 2020-09-02 17:10:59 +10:00
Andrew Tridgell
2bac4b1d97 AP_RCProtocol: fixed up DSM decoder test suite
reverted values from new decoder and added another example
2020-08-24 16:32:35 +10:00
Andrew Tridgell
78c4e27259 AP_RCProtocol: reverted DSM protocol decoder
the new decoder done by Andy is much nicer looking code, but fails to
correctly parse several valid DSM setups, and parses both SBUS and
FPort as DSM, breaking setups that were previously working
2020-08-24 16:32:35 +10:00
Andrew Tridgell
6e1aeb905f AP_RCProtocol: added another DSM satellite protocol 2020-08-24 16:32:35 +10:00
Andrew Tridgell
1560c33418 AP_RCProtocol: fixed support for spektrum satellite receivers
this was broken by the recent DSM protocol decoder change
2020-08-24 16:32:35 +10:00
Andrew Tridgell
2779b26e6e AP_RCProtocol: fixed the "3 good frames" test
require 3 consecutive good frames, not 3 frames total, to declare the
weak protocols as detected
2020-08-24 16:32:35 +10:00
Andrew Tridgell
380e9d3075 AP_RCProtocol: greatly increase robustness of DSM decoding
this prevents other protocols being decoded as DSM
2020-08-24 16:32:35 +10:00
Andrew Tridgell
e0ec46f06d AP_RCProtocol: support a mask of enabled RC protocols 2020-08-24 16:32:35 +10:00
Andy Piper
ce970dcf75 AP_RCProtocol: process CRSF link statistics frames to get RSSI 2020-08-06 18:24:46 +10:00
Peter Barker
8f77536c08 AP_RCProtocol: fix segfault in example due to lack of VideoTX singleton 2020-07-31 07:55:09 +10:00
Andy Piper
b697a44aed AP_RCProtocol: configure VTX when a SRXL2 VTX packet is received
support DSM VTX control
2020-07-14 16:50:08 +10:00
Andy Piper
80e1c0ebb0 AP_RCProtocol: decode DSM frame markers to avoid timing related jitters especially in SITL
complete re-write of DSM decoding
2020-07-13 19:36:49 +10:00