Andrew Tridgell
e8ab35a192
HAL_ChibiOS: fixed stdout in early startup bug
...
this caused a failure to boot on some boards if they tried to print
messages in early startup code before hal was initialised
thanks to @Shadowru for reporting the issue
2020-02-12 13:51:10 +11:00
Andrew Tridgell
982cff0695
AP_HAL_ChibiOS: make all semaphores recursive
...
the cost is very similar and this prevents an easy coding error which
can occur on less used code paths
2020-01-19 20:19:30 +11:00
Andrew Tridgell
a7b83b1e26
HAL_ChibiOS: allow for unbuffered writes without DMA
2020-01-16 20:36:54 +11:00
Andrew Tridgell
bb5c1d07e1
HAL_ChibiOS: implement new UART option bits
2020-01-03 17:32:23 +11:00
Andrew Tridgell
b1ca7380be
HAL_ChibiOS: re-implement half-duplex using HDSEL switching
...
this makes half-duplex more reliable on UARTs with pullups or level
shifters
2020-01-02 09:52:57 +11:00
Andrew Tridgell
faf34970e1
HAL_ChibiOS: automatically control pullup/pulldown on inverted UARTs
...
this makes setup of sport telemetry much easier
2020-01-02 09:52:57 +11:00
Andrew Tridgell
4b4642dd4d
HAL_ChibiOS: allow handling of much higher receiver baudrates with DMA
...
this uses two DMA RX bouncebuffers to minimise the time with DMA
disabled so that we can handle much higher baudrates
2019-12-26 10:42:48 +11:00
Andrew Tridgell
58292821b3
HAL_ChibiOS: fix DMA on UARTs for F303
2019-12-26 10:42:48 +11:00
Mirko Denecke
b84dcd483d
AP_HAL_ChibiOS: remove unnecessary tabs and whitespaces
2019-10-21 08:01:56 +11:00
Andrew Tridgell
bf2cf7834d
HAL_ChibiOS: fixed a bug in parity/stop-bit setting on STM32F7 and H7
...
and add get_options() method
2019-09-06 08:51:45 +10:00
Andrew Tridgell
16bdaaa1af
HAL_ChibiOS: added support for STM31F10x for AP_Periph
2019-08-27 10:29:56 +10:00
Andrew Tridgell
0075b96f3a
HAL_ChibiOS: added uartH
2019-07-12 17:01:21 +10:00
Andrew Tridgell
8c43db1a00
HAL_ChibiOS: implement half-duplex delay and read locking
2018-12-29 15:58:22 +11:00
Andrew Tridgell
85243ad522
HAL_ChibiOS: enable support for half-duplex uart config
2018-11-14 19:05:09 +11:00
Andrew Tridgell
acf03980ca
HAL_ChibiOS: added UART inversion options
...
support GPIO pins or STM32F7
2018-11-14 19:05:09 +11:00
Peter Barker
17f643719a
AP_HAL_ChibiOS: add override keyword in many places
2018-11-08 11:30:12 +11:00
Peter Barker
d2cf065fdf
AP_HAL_ChibiOS: return uart link bandwidth
2018-10-30 19:31:37 +11:00
Andrew Tridgell
83f38d536e
HAL_ChibiOS: fixed flow control auto-detect without DMA
...
this fixes automatic flow control detection when we are not using DMA
for TX
2018-07-13 07:34:30 +10:00
Andrew Tridgell
0a5d287326
HAL_ChibiOS: support uartG
2018-06-29 08:17:38 +10:00
Andrew Tridgell
5bf078cc86
HAL_ChibiOS: fixed build with -Werror-sign-compare
2018-06-27 11:37:45 +10:00
Michael du Breuil
037e53ba8a
AP_HAL_ChibiOS: Reduce flash space of UARTDriver
...
Saves 32 bytes
2018-06-26 02:18:18 +01:00
Andrew Tridgell
8431a677d9
HAL_ChibiOS: added a timeout to DMA UART TX
...
this prevents a shared DMA channel being held for a long time if a CTS
pin is held either by not being connected or by a radio
2018-06-19 09:08:45 +10:00
Andrew Tridgell
0fade4eb9e
HAL_ChibiOS: make sure the UART bounce buffers are DMA safe
2018-06-06 07:15:41 +10:00
Andrew Tridgell
89898bae1d
HAL_ChibiOS: take account of available bytes in receive_time_constraint_us
2018-05-21 14:53:18 +10:00
Andrew Tridgell
7005383f82
HAL_ChibiOS: implement uart receive timestamp API
2018-05-16 18:49:22 +10:00
Andrew Tridgell
e4ce2f532b
HAL_ChibiOS: make smaller builds possible
...
this allows for much smaller builds when you disable a lot of
options. This is part of an effort to create a bootloader of less than
16k using ChibiOS
2018-04-12 11:50:44 +10:00
Andrew Tridgell
e448b5d069
HAL_ChibiOS: implement UART port locking
2018-04-07 09:10:29 +10:00
Andrew Tridgell
bc32276966
HAL_ChibiOS: support DShot output
...
use DMAR burst DMA to minimise number of DMA channels needed
thanks to betaflight for the great reference implementation!
2018-04-07 09:10:29 +10:00
Andrew Tridgell
a64819cbf2
HAL_ChibiOS: minimise DMA TX latency on contended UARTs
...
try to prevent long delays on other users of a DMA channel
2018-04-07 09:10:29 +10:00
Andrew Tridgell
556f3ba53f
HAL_ChibiOS: make UARTs non-blocking by default
...
we never want blocking ports any more with ArduPilot, so defaulting to
blocking makes no sense
2018-03-02 21:39:38 +11:00
Andrew Tridgell
306d35655e
HAL_ChibiOS: allow for bare board builds
...
this allows for a build with no UARTs, no SPI, no I2C, no PWM. Great
for initial board bringup with just USB
2018-03-02 12:52:50 +11:00
Andrew Tridgell
82f1f462ae
HAL_ChibiOS: ensure we don't init a uart driver twice
2018-02-07 20:33:45 +11:00
Andrew Tridgell
dce4c90467
HAL_ChibiOS: moved UART thread to UART driver
...
use an event model for triggering sends from tx complete DMA handler
for unbuffered uarts
2018-02-07 20:33:45 +11:00
Andrew Tridgell
979a2a4796
HAL_ChibiOS: removed debug code
2018-02-07 20:33:45 +11:00
Mark Whitehorn
b94b1dcd97
AP_HAL_ChibiOS: add missing declaration
2018-02-07 20:33:45 +11:00
Siddharth Purohit
02696882e9
HAL_ChibiOS: if unbuffered write, do continue to invoke DMA writes
...
adds higher latency to device sharing DMA
2018-02-07 20:33:45 +11:00
Andrew Tridgell
ad26ca4a27
HAL_ChibiOS: implement parity and stop bits controls
2018-02-07 20:33:45 +11:00
Andrew Tridgell
3f2cc2c9d6
HAL_ChibiOS: implement low latency UART writes
...
this implements the set_unbuffered_writes() API by performing writes
directly in the write() call and not from a timer
2018-02-07 20:33:45 +11:00
Andrew Tridgell
865e4f3104
HAL_ChibiOS: implement _timer_tick in UARTDriver
2018-02-07 20:33:45 +11:00
Andrew Tridgell
f14a847b97
HAL_ChibiOS: rename classes to remove 'Chibi'
...
it is redundent as all classes are in ChibiOS namespace, and makes the
code harder to read
2018-01-15 11:46:02 +11:00
Andrew Tridgell
41be81af34
HAL_Chibios: added hardware flow control for UARTs
...
implement RTS in software and CTS in hardware
2018-01-15 11:46:02 +11:00
Andrew Tridgell
8b6bab7b17
HAL_Chibios: added ChibiOS HAL
...
this is based on initial work by Sid, reset here for easier merging
2018-01-15 11:46:02 +11:00