Leonard Hall
a71793efcf
Tools: Autotest update guided bitbask to include acceleration
2021-07-23 10:19:47 +09:00
Andrew Tridgell
0e4e6b8075
autotest: adjust test_altitude_types for small change in longitude_scale
2021-07-23 10:19:47 +09:00
Andrew Tridgell
21bd2b7008
Tools: allow for double EKF build
2021-07-23 10:19:45 +09:00
Andrew Tridgell
d81b758d77
autotest: support using geocoder for -L location
...
this allows for location names from OSM, for example:
sim_vehicle.py -L '26 Carstensz St Griffith' --console --map
2021-06-29 15:41:26 +10:00
Peter Barker
99a0f5a86a
autotest: disable quadplane ConfigErrorLoop test
...
failing on the autotest server (and locally).
AT-1474.6: RC values bad: (ch=1 want=1500 got=0)
AT-1474.6: AP: Config error: Baro: unable to initialise driver
AT-1474.6: AP: Config Error: fix problem then reboot
AT-1474.6: RC values bad: (ch=1 want=1500 got=0)
AT-1474.6: RC values bad: (ch=1 want=1500 got=0)
AT-1474.6: RC values bad: (ch=1 want=1500 got=0)
2021-06-27 11:09:39 +10:00
Randy Mackay
5ec75578ab
Tools: add copter gps_glitch_loiter_test2
...
checks for twitches in Loiter after GPS glitch
2021-06-25 16:52:57 +09:00
Andrew Tridgell
220107b2a6
Tools: added boat circuit for Rabi
2021-06-25 15:33:55 +10:00
Andrew Tridgell
396094a82c
Tools: added a mission around Rabi, close to -180 degrees lon
2021-06-25 15:33:55 +10:00
Andrew Tridgell
75ae2548a7
Tools: added some locations close to the date line
2021-06-25 15:33:55 +10:00
Andrew Tridgell
3204ce4bf1
Tools: added --postype-single for sim_vehicle.py
2021-06-24 21:34:30 +10:00
Peter Barker
4c173e01ef
autotest: increase number of parameter retries
...
sets were failing just after we uploaded very large numbers of
parameters. I'm guessing the parameter queue in ArduPilot is still
full.
2021-06-24 17:58:31 +10:00
Peter Barker
4bb91d1ec1
autotest: shift where we print which attempt we are doing
2021-06-24 17:58:31 +10:00
Randy Mackay
f3c96b438b
Tools: autotest of vibration failsafe
2021-06-24 08:34:56 +10:00
Peter Barker
b58e7bedaa
autotest: correct placement of not-alive-after-test message
...
This was misplaced with bad conflict resolution
2021-06-24 08:34:06 +10:00
Peter Barker
d6f619fb1a
autotest: emit 'attempt 1/3' when retrying set_parameter
...
Also reterm things in terms of attempts rather than retries
2021-06-24 08:30:03 +10:00
Peter Barker
99c7d3aabc
autotest: ensure no stray message listeners after test
2021-06-23 21:55:32 +10:00
Peter Barker
6a8ca9e45b
autotest: timeout in wallclock time in config error loop test
...
SYSTEM_TIME is not sent in config error loop
2021-06-23 21:55:32 +10:00
Peter Barker
b6d5569244
Tools: param_metadata: disallow @Values and @Bitmask at same time
2021-06-23 18:37:34 +10:00
Peter Barker
7842f55a3b
Tools: add rc channel option to disable all airspeed sensors
2021-06-23 15:13:13 +10:00
Peter Barker
d82a229584
autotest: revert to subprocess.check_call
...
.run is only Python3
2021-06-22 20:24:07 +10:00
Peter Barker
8395bf617f
autotest: disable autotesting of tri frame as it is still busted
2021-06-21 21:17:10 +10:00
Peter Barker
697fbb0db0
autotest: verify roll/pitch are not adversely affected by yaw inputs
2021-06-21 21:17:10 +10:00
Peter Barker
4c20bc2d9d
autotest: ensure reasonable yawrate on takeoff in FlyEachFrame
2021-06-21 21:17:10 +10:00
Peter Barker
d3f90bde7f
autotest: add FlyEachFrame test for Plane
2021-06-21 14:13:18 +10:00
Pierre Kancir
39c96f63c8
Tools: autotest.py: total flake8 compliance.
2021-06-18 16:03:51 +10:00
Pierre Kancir
7ddb4d681d
Tools: autotest: correct exception handling on unit test run.
2021-06-18 16:03:51 +10:00
Peter Barker
723d2dee00
autotest: improve diagnostics around touchdown/takeoff expected tests
...
Also looks at last result as we don't appear to have a consistent number
in our tests
2021-06-18 09:03:34 +09:00
Peter Barker
210818cd6e
autotest: let arming failure messages get spit out
2021-06-17 21:01:23 +10:00
Peter Barker
47a778d033
Tools: remove HIL support
2021-06-15 09:47:31 +10:00
Peter Barker
61fda691f2
autotest: add trivial test for smart battery logging
2021-06-15 09:46:26 +10:00
Peter Barker
cea0d7c971
autotest: move autotest tlog files into buildlogs directory
2021-06-11 22:14:11 +10:00
Peter Barker
e77512ba08
autotest: add method to create simple relative-to-home mission
2021-06-11 16:59:51 +10:00
Peter Barker
14b2af84ab
autotest: break out a home_relative_loc_ne for getting a home-rel loc
2021-06-11 16:59:51 +10:00
Peter Barker
96e14d470a
autotest: retry SITL connect many times while running under GDB
...
Allows for easier debugging under gdb when checking startup code
2021-06-11 11:15:58 +10:00
Peter Barker
0b517cfc57
autotest: start GDB in tui mode by default
2021-06-10 20:52:48 +10:00
Peter Barker
fd792bebf8
autotest: wipe SITL state after temperature cal test
...
ArduPilot internals are fiddling state that the autotest suite is
unaware of, so wipe the eeprom after the test
2021-06-09 14:14:06 +10:00
Peter Barker
79de738266
autotest: wait for a few seconds for arm-failure messages to appear
...
If prearms never come true then we try to arm the vehicle so it tells us
what is wrong. Since we no longer push statustexts hard, we have to
wait for the reasons to come out at normal clocked rates.
2021-06-09 14:13:54 +10:00
Peter Barker
6af6d2fc2a
autotest: add a progress message for looking for a message in a log
2021-06-09 14:13:31 +10:00
Peter Barker
6944ef6af1
autotest: fly each working Helicopter frame
2021-06-09 12:15:42 +10:00
Randy Mackay
058d4299ad
Tools: update SITL tri and hexa gains
2021-06-08 19:11:32 +10:00
Andrew Tridgell
3be7f1ae23
autotest: removed tri from doesn't fly list
2021-06-08 19:11:32 +10:00
Andrew Tridgell
0876cb9cd6
autotest: fixed defaults for tricopter
2021-06-08 19:11:32 +10:00
arsh
45f1d03bda
autotest:Copter test fix for some frames
...
removed some lines
Whitespace messages removal
2021-06-08 16:50:37 +10:00
Peter Barker
0bd9610687
autotest: add trivial test for BodyFrameOdom
2021-06-04 15:09:51 +10:00
Randy Mackay
e8947dfb47
Tools: reduce copter autotest rate yaw P and I gains
...
affects quad, hexa, octa, octa-quad, deca, tri, y6, dodeca-hexa
2021-06-03 12:20:43 +09:00
yaapu
b14dcf1df5
Tools:autotest: updated FRSky SPort test to use new 2 byte data IDs
2021-06-02 17:33:15 +10:00
Pierre Kancir
cf350a52e9
Tools: Autotest: add --coverage option
2021-06-02 14:42:59 +10:00
Peter Barker
2439587c5a
autotest: add tests for ground effect compensation active in EKF
2021-06-02 11:13:16 +09:00
Peter Barker
8925c2830b
autotest: check fence upload/download when creating from locs
2021-06-01 15:54:59 +10:00
Peter Barker
c1a20ceab4
autotest: add test to catch bug with opticalflow if no rangefinder
2021-06-01 11:31:42 +10:00