Commit Graph

43 Commits

Author SHA1 Message Date
Andrew Tridgell 1252ddfe0c APM: rename RDRSTEER to WHEELSTEER
thanks to Jon for the suggestion
2012-08-15 16:28:59 +10:00
Andrew Tridgell e26e8b3b67 APM: added RDRSTEER_ PID for steering on ground
this allows for rolling takeoff with steering, and use of rudder in
landing
2012-08-15 12:39:35 +10:00
Andrew Tridgell e2c8ec2c9e APM: removed THROTTLE_REVERSE option
Better to use RC3_REV
2012-08-09 10:04:44 +10:00
Andrew Tridgell e133900c68 APM: Added STICK_MIXING option
this replaces the compile time option. Disabling during long distance
flights when the transmitter may be out of range is useful.
2012-08-09 08:53:29 +10:00
Andrew Tridgell 2114acddf1 APM: fixed default flap speed
the default of 255 translates to -1 as a AP_Int8, so use zero to mean
no flaps
2012-08-08 13:04:21 +10:00
Andrew Tridgell 5bfd1200d6 APM: change variables to use _cm, _cd and _ms suffix for units
this makes it less likely that we mix up units
2012-08-08 12:12:30 +10:00
Amilcar Lucas 9c1ac2d9e6 More work on ch9, 10 and 11 2012-08-04 19:44:41 +02:00
Andrew Tridgell 6bcfe913f7 APM: added a SCALING_SPEED parameter
this allows users to adjust the base speed used for scaling roll/pitch
PIDs. This can be used to make PIDs work for both airspeed and
non-airspeed control
2012-07-26 11:30:23 +10:00
Andrew Tridgell 7e697e4abd APM: switch back to old nav_roll calculation
the old nav_roll will be used for the 2.50 release to prevent the need
for re-tuning. For the release after that we will use the new
calculation
2012-07-26 10:03:36 +10:00
Andrew Tridgell d6e370886f APM: rename airspeed_cruise to airspeed_cruise_cm to make the units clearer
it is in cm/s, not m/s
2012-07-19 11:50:41 +10:00
Andrew Tridgell 1cf5057c61 APM: Use g.airspeed_cruise for turn rate calculation if the airspeed sensor is disabled.
This gives our best approximation for auto flight
2012-07-19 11:50:41 +10:00
Jonathan Challinger c7da63509b APM: Removed unused YAW_DAMPENER code.
YAW_DAMPENER was defined as zero
2012-07-19 11:50:21 +10:00
Jonathan Challinger d9d055ef78 APM: Removed incorrect nav_gain_scaler from nav_roll calculation.
nav_gain_scaler was originally added due to a perceived improvement in
loiter performance, but is incorrect for navigation. Turn rate is a
function of airspeed and bank angle, ground speed has no effect on
that.
2012-07-19 11:50:06 +10:00
Andrew Tridgell de3c9ce56d Airspeed: change APM to use new AP_Airspeed library
the next step is AHRS dead reckoning
2012-07-16 11:21:50 +10:00
Andrew Tridgell f6d7d1bc59 APM: changed PID library to do automatic deltat calculation
this fixes a problem with the HDNG2RLL PID, which was using the wrong
time base and prevents similar bugs from happening in the future
2012-07-06 19:59:18 +10:00
Pat Hickey 1c00d1ffe3 ArduPlane: Fix effect of ELEVON_REVERSE
* Previously, the ELEVON_REVERSE parameter was equivelant in function to the
  ELEVON_CH1_REVERSE parameter. These parameter values are found in
  g.reverse_elevons and g.reverse_ch1_elevon, and used to map to the radio_out
  channels in ArduPlane/Attitude.pde
* It seems the author's intent was for ELEVON_REVERSE to change the sign for
  the combination of pitch & roll into ch1 & ch2, as there are already
  parameters which change just the sign of ch1 and just the sign of ch2.
* Discovered this bug because I happened to build an elevon airframe which was
  not possible to setup with the existing ELEVON_ and RCn_REV parameters.
* This will break existing elevon setups if the user used ELEVON_REVERSE
  instead of ELEVON_CH1_REVERSE, since they were previously interchangable.
2012-05-27 22:15:08 -07:00
Andrew Tridgell b3aa704c49 AirSpeed: added parameter ARSPD_USE
setting ARSPD_ENABLE to 1 and ARSPD_USE to 0 allows the airspeed
sensor to be initialised and logged without it being used for flight
control. This is very useful when initially testing an airspeed sensor
in a new plane. It also makes it possible to enable/disable the use of
the airspeed sensor during a flight at any time.
2012-05-22 20:02:23 +10:00
Andrew Tridgell 8afd196907 APM: adapt ArduPlane for AHRS framework 2012-03-19 17:29:02 +11:00
Phil 9242c157ee APM: Fix rudder in elevon mode.
elevon planes can have rudders too
2012-02-16 14:43:24 +11:00
Doug Weibel a5df59eba3 Remove old debug print 2011-12-24 14:26:35 -07:00
Doug Weibel 7879efb8ae Fix scaling on "turn coordination" yaw PID so that P gain values fall in "usual" range 0.1 to 10. 2011-12-24 14:26:35 -07:00
Andrew Tridgell 3b148c87d5 geofence: main geo-fence code
this implements the primary logic of geo-fencing
2011-12-16 20:11:51 +11:00
Andrew Tridgell 2bd18e937c throttle: only use throttle slew in auto throttle modes
we don't want STABILISE and FBWA to have throttle change limits
2011-12-12 15:14:55 +11:00
Doug Weibel 2ef4c79a7c Minimum ground speed patch from Claudio Natoli. Thanks Claudio!
This patch will boost the target airspeed as necessary to keep the ground speed above a parameter value - param_min_groundspeed.  Airspeed is still limited to FBW-max.  Setting min_groundspeed to zero (default) disables the feature.
2011-12-09 16:43:25 -07:00
Amilcar Lucas 6484b83291 More optimizations
I forgot these ones.
2011-10-09 15:34:47 +02:00
Amilcar Lucas 865bb34657 Optimize the code a bit more, only perform calculations if they are necessary 2011-10-09 15:27:17 +02:00
Amilcar Lucas c624582c91 Use a single if instead of four 2011-10-09 15:27:17 +02:00
Amilcar Lucas e232a0936f Use the shorter macro call instead 2011-10-09 13:57:35 +02:00
Andrew Tridgell 5d0d1b6a6d fixed a crash in HIL
The g_rc_function[RC_Channel_aux::k_flap_auto] ptr came out as NULL
during one HIL run on a desktop CPU, which led to ArduPlane
crashing. I am not yet sure if this can happen in real flight, but I
think the NULL check is worthwhile to be sure.
2011-10-09 22:09:00 +11:00
Andrew Tridgell 6656847faa fixed some ambiguous if/else combinations
gcc was complaining about the logic
2011-10-09 22:09:00 +11:00
Amilcar Lucas f1d47982e2 Only use radio_in values if the channel is not used as flight_mode_channel 2011-10-08 22:15:54 +02:00
Doug Weibel 5073acce3e Add auto flap functionality to FBW-B 2011-09-30 07:25:36 -06:00
Doug Weibel 9396e3ab58 Fix missing capitalization 2011-09-30 07:25:35 -06:00
Doug Weibel adbe965f35 Rework prev commit a bit cleaner as suggested by Janne Mäntyharju 2011-09-30 07:25:35 -06:00
Doug Weibel 3fff788f95 Add code to disable throttle if we are on the ground and in FBW_B or higher
Add code to disable throttle if we are on the ground and in FBW_B or higher.  We believe we are on the ground if speed < 5 and alt < 5.  Also check that we are not trying to perform a takeoff.
2011-09-30 07:25:35 -06:00
Doug Weibel 932e0fe45c Correct bug in auto flap handling 2011-09-22 20:50:15 -06:00
Andrew Tridgell e61d742345 GCS: make the two GCS links gcs0 and gcs3
the artifical separation between 'gcs' and 'hil' just leads to
confusion. This also simplifies the code a bit more, and saves us a
bit more text
2011-09-19 11:04:02 +10:00
Amilcar Lucas c7b3bfd295 Use the G_RC_AUX macro when possible. Added more comments. Remove unused code 2011-09-12 20:21:12 +02:00
Doug Weibel 251c5875fb Disable stick mixing if in failsafe
If trim values differ from failsafe channel values then stick mixing will adversely affect performance while in failsafe
2011-09-11 21:50:32 -06:00
Amilcar Lucas f4998c3673 Moved a function from radio.pde to the RC_Channel_aux library. Now its more readable and reusable 2011-09-10 13:26:29 +02:00
Amilcar Lucas b7a0d8836a This is the real HEAD of the APM_Camera branch. Seams that lots of changes got lost in the SVN to GIT port 2011-09-09 16:18:38 +02:00
Andrew Tridgell 609ae8359d import APM_Camera branch from SVN 2011-09-09 11:45:13 +10:00
Andrew Tridgell e0dc1271d6 imported ArduPlane from ArduPilotMega svn 2011-09-09 11:29:39 +10:00