Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
14,461 Commits 71 Branches 509 Tags 758 MiB
Commit Graph

14461 Commits

Author SHA1 Message Date
Andrew Tridgell c93ae67541 DataFlash: don't try and open logfile on failure more than once 
this prevents a corrupted microSD card from causing a continuous
attempt to open a log file while in flight, which can cause large
scheduler delays

Pair-Programmed-With: Grant Morphett <grant@gmorph.com>
 2014-12-21 14:50:42 +11:00
Andrew Tridgell abd1ece6e3 DataFlash: don't write out parameters if log open fails 2014-12-21 14:50:42 +11:00
priseborough f2c506339a AP_NavEKF: Reduce time required to recover from GPS timeouts 
The time required for GPS to be lost or rejected before vehicles with airspeed sensors either reset to GPS or invoke the zero side-slip assumption to constrain drift has been reduced from 15 to 10 seconds
A duplicate zeroing of the GPS position offset has been removed
If the vehicle is a non hovering vehicle (eg a plane) then the speed at which the GPS offset is pulled back to zero after a reset is increased from 1 to 3  m/s

This also improves recovery from bad inertial data for planes
 2014-12-18 21:50:40 +11:00
priseborough f73816dbb5 AP_NavEKF: Improve robustness to long periods without GPS 2014-12-18 21:07:45 +11:00
Randy Mackay a44b4b5e87 Mission: allow 15 do-jump commands on Pixhawk 2014-12-18 17:02:48 +09:00
Randy Mackay 05fedbf98f Copter: minor formatting fixes 2014-12-18 16:38:34 +09:00
Jonathan Challinger 91bff63267 Copter: Fix LAND overshoot issue 2014-12-18 16:38:31 +09:00
priseborough 3afde0061f AP_NavEKF: Use named states for velocity reset 
Readibility improvement
 2014-12-18 17:29:50 +11:00
priseborough f6ce25df2a AP_NavEKF: Do not reset vertical velocity state from GPS 
Doing this can cause large height and height rate errors if large GPS velocity errors cause the GPS tn be rejected for long enough to cause a timeout and reset of states.
 2014-12-18 17:29:47 +11:00
Andrew Tridgell 597273cfff AP_TECS: remove lag from height demand in landing 
this predicts ahead the height demand for landing, where we have a
continuous demanded descent. This removes the effect of the lag
introduced by the height demand filters
 2014-12-18 09:58:12 +11:00
Andrew Tridgell eb13395967 Plane: cleanup mavlink_system setup 2014-12-17 11:30:04 +11:00
Andrew Tridgell 87df3c3442 Rover: cleanup mavlink_system setup 2014-12-17 11:29:50 +11:00
Andrew Tridgell b5a5b71512 GCS_MAVLink: reverse sense of check_and_forward() 
also increase number of routes on larger systems and improved route
learning logic
 2014-12-17 10:32:28 +11:00
Andrew Tridgell a967a682a4 GCS_MAVLink: added routing test sketch 2014-12-17 10:32:28 +11:00
Andrew Tridgell 7f817502c4 GCS_MAVLINK: implement new routing rules 
see description in coments
 2014-12-17 10:32:28 +11:00
Randy Mackay b6bcf841e1 Copter: remove second camera mount 2014-12-16 21:26:20 +09:00
Andrew Tridgell 976ae14f1f Plane: improve landing aim point calculation 
try to account for wind and current ground speed to dynamically update
glide slope in landing to flare at the right point
 2014-12-15 21:51:08 +11:00
Andrew Tridgell 70f5ec60e8 AP_TECS: added get_land_sinkrate() 2014-12-15 21:51:07 +11:00
Andrew Tridgell 8c1cab84c7 AP_SpdHgtControl: added get_land_sinkrate() 2014-12-15 21:51:07 +11:00
Jonathan Challinger cafb38e923 Copter: allow radio failsafe while disarmed so that user can be notified 2014-12-15 14:10:29 +09:00
Randy Mackay 21beb26484 Notify: minor event reordering 
No functional change
 2014-12-15 14:10:26 +09:00
Randy Mackay 79e40b4f6a Copter: do not send mode_change event before init complete 
This avoids a beep as the flight mode is set during start-up
 2014-12-15 14:10:23 +09:00
Randy Mackay e68a69e139 ToneAlarm_PX4: remove user_mode_init flag 
Replaced by an initialised check in the main ArduCopter flight code
 2014-12-15 14:10:21 +09:00
Randy Mackay 562f3e7382 Copter: set notify event when failsafe changes flight mode 2014-12-15 14:10:19 +09:00
Randy Mackay 1c8ab375e2 Notify: rename failsafe_action event 2014-12-15 14:10:15 +09:00
Randy Mackay 6a15d21704 Copter: minor format change 2014-12-15 14:10:13 +09:00
Randy Mackay 972c8e47d2 Notify: rename notify_types to notify_flags_type 2014-12-15 14:10:10 +09:00
Randy Mackay bfc86ac7c0 ToneAlarm_PX4: add comments 2014-12-15 14:10:06 +09:00
Randy Mackay c75ab8f3e5 Notify: add comments re events 2014-12-15 14:09:15 +09:00
Jonathan Challinger f045c75bfe Copter: play various tones 2014-12-15 14:09:12 +09:00
Jonathan Challinger 3dfcdde6be AP_Notify: Rework ToneAlarm_PX4 to play tones from local array 2014-12-15 14:09:04 +09:00
Randy Mackay fd55a2d9c4 Copter: increase GPS_HDOP_GOOD default to 2.3 2014-12-15 10:45:50 +09:00
priseborough e2d47f836e AP_TECS: Fix bug causing plane to fly high on landing approach 
The introduction of the height rate flare logic caused the demanded height rate to be zero except when a flare manouevre was being performed. This caused the plane to lag behind height changes if the D gain was non-zero, which caused it to fly high during landing approach.
 2014-12-14 09:43:46 +11:00
Randy Mackay 43901dce65 Tracker: mavlink component id to 1 
The antenna tracker's system id (aka SYSID) should be different from
other vehicles but it's component id should be "1" like copter, plane
and rover.
 2014-12-11 21:09:15 +09:00
Randy Mackay b54b7b7448 GCS_MAVLink: fix compiler error 2014-12-11 16:26:26 +09:00
Randy Mackay e581e81da5 AP_NavEKF: reorder declation to fix compiler warning 
No functional change
 2014-12-11 15:37:56 +09:00
Randy Mackay ddda0d52ce Baro: reorder declaration to fix compiler warning 
No functional change
 2014-12-11 13:06:24 +09:00
Andrew Tridgell 76c47f56c5 Rover: removed fwd of unknown msg types 2014-12-11 12:32:54 +09:00
Andrew Tridgell 12f0c49915 Plane: remove fwd of unknown msg types 2014-12-11 12:32:52 +09:00
Andrew Tridgell ade7f9e1a9 GCS_MAVLink: fixed forwarding of non-targetted messages 2014-12-11 12:32:50 +09:00
Andrew Tridgell fcf17829cc GCS_MAVLink: fixed addition to routing table 2014-12-11 12:32:48 +09:00
Andrew Tridgell 079158d4b8 GCS_MAVLink: strip out the old GCS_Class class 
this is not longer needed as we don't support multiple protocol
classes
 2014-12-11 12:32:45 +09:00
Andrew Tridgell 0d2308f754 AntennaTracker: removed old PROXY_MODE parameter 
this should not be needed any more
 2014-12-11 12:32:42 +09:00
Andrew Tridgell c94e934fdf AntennaTracker: use generic mavlink routing 
this replaces the special purpose routing in the AntennaTracker
 2014-12-11 12:32:40 +09:00
Andrew Tridgell 41a5f79046 Rover: removed use of mavlink_check_target() 2014-12-11 12:32:38 +09:00
Andrew Tridgell e73f8b8e40 Copter: removed use of mavlink_check_target() 2014-12-11 12:32:34 +09:00
Andrew Tridgell f198cdcf20 GCS_MAVLink: added support for a MAVLink snoop function 
this can be used to watch messages for different targets
 2014-12-11 12:32:32 +09:00
Andrew Tridgell 34be7f808e GCS_MAVLink: only try to fwd packets to active channels 2014-12-11 12:32:30 +09:00
Andrew Tridgell 411766f45a AP_Mount: removed use of mavlink_check_target() 2014-12-11 12:32:27 +09:00
Andrew Tridgell 4a9331c505 AP_Camera: removed use of mavlink_check_target() 2014-12-11 12:32:24 +09:00