Paul Riseborough
fef6345c2f
AP_NavEKF3: Increase delta velocity bias state process noise
...
Required due to state variance collapse on ground with some systems using RTK GPS.
2023-05-25 11:03:52 +09:00
Paul Riseborough
da7a4b47ed
AP_NavEKF3: Strengthen recovery from bad delta velocity bias learning
2023-05-25 11:03:52 +09:00
Paul Riseborough
04d21fc368
AP_NavEKF3: Increase default value of EK3_ABIAS_P_NSE
...
This is required because some hardware setups with RTK GPS have experienced a collapse of the delta velocity state variances.
2023-05-25 11:03:52 +09:00
Paul Riseborough
69b26836f0
AP_NavEKF3: Retune and fix delta velocity bias state variance protection
2023-05-25 11:03:52 +09:00
Andy Piper
153a665082
AP_NavEKF: ensure gyro biases are numbers
...
avoid errors during compass mot
2023-05-25 11:03:52 +09:00
Peter Barker
9b069a0eb7
AP_EFI: use uint16_t to store offset
...
prevents infinite loop if there are exactly 255 bytes ready to read
2023-05-25 11:03:52 +09:00
Andy Piper
750a914cce
AP_HAL_ChibiOS: ensure the rcout TIM_UP DMA request source is re-instated after cancellation
...
This fixes a bug in bdshot whereby dma cancellation could result in the wrong DMA channel
being used for dshot output and hence motors stopping
2023-03-27 11:14:47 +09:00
Andy Piper
6dda5b223c
AP_HAL_ChibiOS: ensure that DMA source is correct on DMA send for rcout
2023-03-27 11:14:47 +09:00
Andrew Tridgell
eb49e2ef17
HAL_ChibiOS: switched to 64 bit maths for DShot timings
...
this fixes a timer wrap bug at 71 minutes after boot that impacts
bdshot
2023-03-26 11:57:57 +09:00
bugobliterator
464e7d183a
AP_HAL_ChibiOS: add CubeOrangePlus-bdshot hwdef
2023-03-26 11:57:57 +09:00
Peter Barker
5d7d13f1a4
AP_Mount: rename local _chan to chan in Gremsy methods
...
based on PR feedback
2023-03-02 15:01:23 +09:00
Peter Barker
6cc4afaa56
GCS_MAVLink: add method to get link (not just channel number) for mavtype and compid
2023-03-02 15:01:23 +09:00
Peter Barker
d1acebe415
AP_Mount: correct double-mapping of port to channel number
...
set_message_interval takes a port number, not a channel number (it was originally written as an internal function, after all). Before this patch we were double-mapping from one to the other. That works so long as the port you are mapping also corresponds to the chanel number - which it will, for example, if you are using serial2 with both serial0 and serial1 also set to mavlink. If you set serial5_protocol to 2 an attempt to use it for controlling a gremsy it will *not* work because we map into backwards twice.
2023-03-02 15:01:23 +09:00
Reilly Callaway
b3982a61f7
AP_PiccoloCAN: Fix ESC voltage and current telem scaling
2023-03-02 15:01:23 +09:00
bugobliterator
27240716dd
AP_HAL_ChibiOS: add HAL_WITH_MCU_MONITORING define for H757
2023-03-02 15:01:23 +09:00
Randy Mackay
4452745892
AP_Mount: servo mount yaw handling fix
2023-03-02 15:01:23 +09:00
Andrew Tridgell
c6a2b03f91
AP_AHRS: fixed earth frame accel for EKF3 with significant trim
2023-03-02 15:01:23 +09:00
Andy Piper
312549d773
AP_HAL_ChibiOS: enable VTX power on MambaF405 2022
2023-03-02 15:01:23 +09:00
Iampete1
d019a3d865
AP_TECS: protect against low airspeed in reset
2023-03-02 15:01:23 +09:00
Andrew Tridgell
5afe4954e9
AP_GPS: don't try and configure M10 options on non-M10 GPS
...
this fixes a pre-arm failure "GPS 1 failing configuration checks" on
non-M10 GPS modules, including AP_Periph
it also adds the ublox unconfigured msgs to the DroneCAN GNSS.Status
errors field for easier diagnosis of this type of issue in the future
2023-03-02 15:01:23 +09:00
Andrew Tridgell
d6c5765ff9
AP_Scripting: disable PWMSource in scripts for 4.3.4
...
this avoids the interrupt handling bug. Proper fix in 4.4.x
2023-03-02 15:01:23 +09:00
Andy Piper
e6e96bcf5e
AP_HAL_ChibiOS: probe external compasses on foxeer reaper f745
2023-02-14 16:35:40 +09:00
Andy Piper
be6bd4be8b
AP_HAL_ChibiOS: enable VTX power on MambaH743v4
2023-02-14 16:35:40 +09:00
bugobliterator
e2fede3e3b
AP_HAL_ChibiOS: add support for CubeOrangePlus BG edition
2023-02-14 16:25:55 +09:00
Andrew Tridgell
01bbbc1f45
AP_IOMCU: fixed an issue with double reset of IOMCU
...
if the IOMCU resets twice in quick succession then the code that
restores the safety state while flying can fail, leading to the
aircraft trying to continue flying with safety on
This results from two issues:
- a race in handling the last_safety_off variable
- the fact that plane sets the soft_armed state based on safety state
2023-02-14 16:25:55 +09:00
Bob Long
33fafed63c
AP_Baro: fix bug in alt error arming check
...
get_altitude_difference already subtracts MSL altitude
2023-02-14 16:25:54 +09:00
Andrew Tridgell
9853fc4a65
RC_Channel: disable FFT notch tune feature
...
See https://github.com/ArduPilot/ardupilot/pull/22686
2023-02-14 16:25:54 +09:00
Andy Piper
703020be12
AP_HAL: ensure the DSP tracked peaks do not overflow the buffer
2023-02-14 16:25:54 +09:00
rishabsingh3003
4d437c3368
AC_Precland: Add option to resume precland after manual override
2023-02-14 16:25:54 +09:00
Andrew Tridgell
8219b50023
AP_CANManager: add an output buffer for MAVCAN
...
this fixes firmware update of peripheral nodes using MAVCAN
2023-02-14 16:25:54 +09:00
Peter Barker
3d7c6a9cfb
AP_Logger: avoid logging duplicate FMT/UNIT/FMTU/MULT messages
...
Failing due to being out of time meant we wouldn't incremement the counter, even though we'd emitted the item.
it is important we try to send something, so move this check to be after we increment whichever counter we are using.
2023-02-14 16:25:54 +09:00
Andrew Tridgell
1b9f695188
AP_OpenDroneID: set EMERGENCY status on crash or chute deploy
...
RemoteID modules are required to set EMERGENCY status on uncontrolled
descent or crash. This fixes our implementation to do that, either via
existing vehicle crash checking code or via a parachute release
2023-02-14 16:25:54 +09:00
Andrew Tridgell
59d5691e37
AP_Compass: fixed zero compass diagonals
...
this fixes a regression from 4.2 to 4.3.
previously we automatically set the diagnoals to 1,1,1 if they were
0,0,0. We don't do that any more. I was helping a user who had copied
an old config with 0,0,0 for diagonals and did not understand two
things:
- the compass did not work in 4.3
- large vehicle mag cal didn't work
2023-02-14 16:25:54 +09:00
Randy Mackay
f677d876a7
GCS_MAVlink: send_autopilot_state_for_gimbal_device sends ef z-axis rate target
2023-02-14 16:25:54 +09:00
Randy Mackay
2616afc5c8
AP_Vehicle: replace get_rate_bf_targets with get_rate_ef_targets
2023-02-14 16:25:54 +09:00
Randy Mackay
fa77792d69
AC_AttitudeControl: add get_rate_ef_targets accessor
2023-02-14 16:25:54 +09:00
Andrew Tridgell
481cb4d03d
AP_RCProtocol: on IOMCU don't allow protocol to change once detected
...
this prevents a crash where in-flight noise causes an incorrect
protocol detection, such as DSM for a SBUS input
2023-02-14 16:25:53 +09:00
Andrew Tridgell
93136f84a2
AP_Scripting: fixed alt frame error in ship landing
...
if terrain follow is enabled then this would result in mixing a
terrain alt with an absolute alt, resulting in attempts to descend to
a negative alt
2023-01-20 10:12:59 +09:00
Andrew Tridgell
9032a91b1e
AP_InertialSensor: cleanup NAMED_VALUE_FLOAT for fifo error
2023-01-20 10:12:59 +09:00
Andrew Tridgell
c89d5448b2
AP_InertialSensor: fixed flood of log with fast fifo reset
2023-01-20 10:12:59 +09:00
Andrew Tridgell
d48ab3b384
GCS_MAVLink: fixed FTP terminate session error
...
this caused ftp downloads to intermittently fail. The cause is the FTP
client may ask for a session terminate and then immediately afterwards
a ftp open. The open would fail as the ftp session was considered
active
2023-01-20 10:12:59 +09:00
Andrew Tridgell
f2c9b3ac06
hwdef: save flash to get 4.3.3 building on some low flash boards
2023-01-10 10:14:12 +09:00
Andy Piper
bd506117f2
AP_HAL_ChibiOS: support for MambaF405-2022B
...
Co-authored-by: vidmantas zemleris <vidmantas.zemleris@gmail.com>
2023-01-10 10:14:12 +09:00
Andy Piper
2a8c6cace0
AP_HAL_ChibiOS: MambaH743 v2 with dual ICM42688
2023-01-10 10:14:12 +09:00
Andy Piper
2daf595537
AP_HAL_ChibiOS: add UART baudrate accessor
2023-01-10 10:14:12 +09:00
Andy Piper
97fa597e19
AP_HAL: add UART baudrate accessor
2023-01-10 10:14:12 +09:00
Andy Piper
d7f0bf786a
RC_Channel: add option to support ELRS at 420kbaud
2023-01-10 10:14:12 +09:00
Andy Piper
3838749062
AP_RCTelemetry: report CRSF link rate rather than mode.
...
Encode actual protocol being used
cleanup is_elrs() and version numbers
2023-01-10 10:14:12 +09:00
Andy Piper
a4e198d5b0
AP_RCProtocol: check for 3 good frames for CRSF
...
Move get_link_rate() and get_protocol_string() to CRSF protocol
allow ELRS at 420kbaud to be configured
allow CRSF to bootstrap at ELRS desired baudrate
2023-01-10 10:14:12 +09:00
Andrew Tridgell
5cbd810e41
AC_AttitudeControl: fixed time wrap bug in is_active_xy()
...
this failed at 70 minutes
2023-01-10 10:14:12 +09:00