Mirror/ardupilot
5
0
Fork 0
mirror of https://github.com/ArduPilot/ardupilot synced 2025-01-07 08:28:30 -04:00
Code Issues Packages Projects Releases Wiki Activity
59,824 Commits 71 Branches 510 Tags 770 MiB
a5bfd58524
Commit Graph

33833 Commits

Author SHA1 Message Date
Peter Barker
a5bfd58524 AP_AHRS: remove un-needed AP_AHRS_Backend::getCorrectedDeltaVelocityNED 
over-kill, and can be derived from backend biases if required
 2023-09-19 12:51:31 +10:00
Andy Piper
1b1e5b1085 hwdef: correct inversion pin on MambaF405v2 
correct battery setup for MambaF405v2
provide suitable serial defaults for MambaF405v2
reallocate DMA channels to allow full DMA on USART3 and NeoPixel on MambaF405v2
add camera control pin to MambaF405v2
 2023-09-19 11:43:58 +10:00
Peter Barker
9bcd9df7dd AP_AHRS: move load_watchdog_home into correct cpp file 
NFC, just moving the code out of the DCM backend file
 2023-09-19 11:35:45 +10:00
Peter Barker
622b83da9e AP_AHRS: move set_home method into correct .cpp file 
NFC, just moving the code in prepration for allowing DCM to be compiled out
 2023-09-19 11:35:45 +10:00
Peter Barker
f8a4dd02d9 AP_AHRS: simplify specification of primary IMU indices 
given that DCM doesn't specify to use the primary accel or gyro when fetching the data from the Ins library, it shouldn't be special-cased here when asked what the primary IMU and accel are.  Note that this was asking for the *configured* backend type, rather than the active EKF type, making these clauses even stranger.

This also changes the definition of the "primary IMU index" to be whichever gyro is active rather than the accel.  Since we don't currently split primary gyro/primary accel, this is a reasonable change.
 2023-09-19 11:34:37 +10:00
Peter Barker
e83b6bcfcb AP_AHRS: remove get_primary_IMU_index from public interface 2023-09-19 11:34:37 +10:00
Peter Barker
0b4007d22c AP_AHRS: make comment match code behaviour in airspeed DCM-fallback 
the comment here was incorrect; we do not need EKF3 to have a good wind estimate to fall back to DCM here.

Also restructure the code to make it more obvious that this is what's going on.
 2023-09-19 11:30:45 +10:00
Peter Barker
c30bceb2a0 AP_AHRS: return location inside backend_results structure 
with the change to cache results inside AP::ahrs().state we no longer need to worry about the backend's attempts to project the last-known-location forwards according to amount of time elapsed since that last-known-location was calculated.
 2023-09-19 11:25:49 +10:00
Peter Barker
5b0393e280 GCS_MAVLink: handle MAV_CMD_PREFLIGHT_REBOOT_SHUTDOWN as INT or LONG 2023-09-19 11:16:10 +10:00
Henry Wurzburg
4508f23893 AP_OSD:Update/correct DisplayPort BF MSP symbols 2023-09-19 11:13:54 +10:00
Randy Mackay
ee7df6b060 AP_Mount: Xacti sets datetime 2023-09-19 10:58:52 +10:00
Randy Mackay
5e77ca483d AP_Mount: Xacti slides reduced flash usage 2023-09-19 10:58:52 +10:00
Randy Mackay
b7d44c75a6 AP_Mount: Xacti gets reduced call to AP_HAL::millis() 2023-09-19 10:58:52 +10:00
Randy Mackay
fc24b45d56 AP_Mount: Xacti handles firmware ver and status 2023-09-19 10:58:52 +10:00
Randy Mackay
1f11d5f3fc AP_DroneCAN: support string parameters 2023-09-19 10:58:52 +10:00
Peter Barker
1d4a77d33a AP_OSD: correct compilation when OSD compiled out 2023-09-19 08:22:16 +09:00
Iampete1
d3d606ab69 AP_SmartRTL: fix disable if second point fails to add 2023-09-19 08:01:47 +09:00
Nick Exton
1dd7d7dd7b AP_Mount: In Siyi, change severity of warnings for Data Loss and No Card 2023-09-19 07:59:15 +09:00
Nick Exton
bad73df582 AP_Mount: In Siyi, clean up toggling of video recording 2023-09-19 07:59:15 +09:00
Nick Exton
a8e10ca59b AP_Mount: In Siyi, request gimbal config when set_motion_mode() changes mode 2023-09-19 07:59:15 +09:00
Nick Exton
d3358ff3af AP_Mount: Make Siyi set_motion_mode() only send on change 2023-09-19 07:59:15 +09:00
Nick Exton
62858ff91f AP_Mount: Siyi set_motion_mode() now returns bool 
And the mode param is now const.
 2023-09-19 07:59:15 +09:00
Nick Exton
9fe5f4151e AP_Mount: In Siyi, use config info received from gimbal 2023-09-19 07:59:15 +09:00
Nick Exton
188a5654c2 AP_Mount: Siyi set_lock() becomes set_motion_mode() 
We have three motion modes on the Siyi: Lock, Follow and FPV.

Partially addresses #22900
 2023-09-19 07:59:15 +09:00
Henry Wurzburg
d13085d4bb HWDEF:Correct hwdef of BETAFPV-F405 2023-09-19 08:03:58 +10:00
Andrew Tridgell
ebffc8fc65 HAL_ChibiOS: fixed CAN statistics on F4/L4/F3/F7 2023-09-19 07:33:53 +10:00
Peter Barker
273b9ea354 GCS_MAVLink: correct sensors when no baros found 
GCSs will know we have no baros on-board, as will the RC telemetry library
 2023-09-19 07:28:30 +10:00
subashchandar
d1e8cef9b6 AP_HAL_ChibiOS: Increase limit for Storage pages 
STm32l4+ has 512 flash pages in dual flash mode
 2023-09-17 21:03:37 +10:00
subashchandar
2207f7bb14 AP_HAL_ChibiOS: change adc sampling rate 
STm32l4r5 adc sampling rate.
 2023-09-17 21:02:42 +10:00
James O'Shannessy
9b06395573 AP_Mount: Fix brace enclosed initializer list for older compilers 2023-09-16 14:59:00 +09:00
Peter Barker
62950169f7 AP_Notify: tidy use of DiscreteRGB 2023-09-16 08:47:37 +09:00
Nick Exton
83636e6ef3 AP_Mount: In Siyi, fix missing braces in process_packet() 2023-09-15 20:13:55 +09:00
Davide_Lentini
5b0d7928bd hwdef: Update luminousbee5 defaults.parm 2023-09-14 12:40:59 +10:00
Michael du Breuil
dcfd9f6586 AP_HAL_ChibiOS: Add sw-nav-f405 target 
Navlight board with a compass, requires #24945 for status light to work
 2023-09-14 10:56:20 +10:00
Michael du Breuil
3243751e0b AP_Notify: Reenable the DiscreteRGB backend 2023-09-14 10:55:26 +10:00
Henry Wurzburg
ae05df22eb HWDEF: Correct define errors in HEEWING and Tmotor bds 2023-09-14 10:38:01 +10:00
Ep Pravitra
db72fd16d4 AP_AdvancedFailsafe: make GCS failsafe timeout a parameter 2023-09-13 18:06:28 +10:00
zvldz
8e08a9bdf6 AP_VideoTX:add additional freq bands 2023-09-13 18:05:24 +10:00
Andy Piper
2f807230d0 AP_AHRS: rename get_angle_P_scale_logging() 2023-09-13 18:02:44 +10:00
Andy Piper
31a2acb7ad AC_AttitudeControl: rename get_angle_P_scale_logging() 2023-09-13 18:02:44 +10:00
Andy Piper
ab24f97275 APM_Control: implement single-cycle feed-forward scaler for roll and pitch 2023-09-13 18:02:44 +10:00
Peter Barker
df911e9e76 AP_Notify: remove unused enumeration 
this was copied over into the OreoLED driver
 2023-09-13 17:34:30 +10:00
Peter Barker
4f0b328674 GCS_MAVLink: support preflight calibration via command_int 2023-09-13 17:24:07 +10:00
TunaLobster
6f80f8f200 AP_HAL_ChibiOS: Add hwdef for ARK_CANNODE 2023-09-13 17:06:02 +10:00
Andy Piper
f02b34fc02 hwdef: mRoControlZeroOEMH7 bdshot version 2023-09-13 17:04:24 +10:00
Andy Piper
feabd1f568 AP_HAL_ChibiOS: hwdef for Flywoo F405 Pro 2023-09-13 17:03:51 +10:00
Andy Piper
9387236e6c AP_HAL_ChibiOS: prefer bi-directional dshot channels that can be shared on F4 and F7 2023-09-13 17:03:51 +10:00
rishabsingh3003
8a1fa0e096 Copter: Allow fast descend while Prec Landing 2023-09-13 11:49:16 +10:00
rishabsingh3003
d5a5f4f863 AC_PrecLand: Allow fast descend 2023-09-13 11:49:16 +10:00
Nick Exton
cc25f2915a AP_Mount: In Siyi, fix calculation of attitude quaternion 
Order of rotation for Siyi gimbals is (yaw, roll, pitch), which is 312
order. Quaternion::from_euler() function assumes a 321 order of
rotation (yaw, pitch, roll).
 2023-09-13 11:48:47 +10:00