Commit Graph

17454 Commits

Author SHA1 Message Date
Andrew Tridgell
6668a2e602 AP_RangeFinder: fixed lightware serial with LW20 lidar
it needs a longer serial write to force it to serial mode from i2c
2019-02-27 20:06:06 +09:00
Andrew Tridgell
f04efe7985 HAL_ChibiOS: allocate threads from any heap
this fixes a failure on MatekF405-Wing where it fails to allocate the
SPI thread for the IMU
2019-02-27 11:59:45 +11:00
Andrew Tridgell
5ce1c14674 AP_NavEKF3: fixed EKF compass switching
when we had 3 compasses the lack of the 'break' meant when we switched
compass in flight we would always switch back instantly to the one
that we had just rejected.
2019-02-09 16:02:08 +11:00
Andrew Tridgell
95522b5486 AP_NavEKF2: fixed EKF compass switching
when we had 3 compasses the lack of the 'break' meant when we switched
compass in flight we would always switch back instantly to the one
that we had just rejected.
2019-02-09 16:02:08 +11:00
Andrew Tridgell
f614dcbb18 AP_Compass: change to 3 compasses in SITL 2019-02-09 16:02:08 +11:00
Andrew Tridgell
30d11f6a40 Filter: fixed crash on zero cutoff frequency
this fixes #10435
2019-02-09 16:02:08 +11:00
Andrew Tridgell
5a0e0179d8 HAL_ChibiOS: fixed mini-pix uart order 2019-02-09 16:02:08 +11:00
Andrew Tridgell
2f7121a073 HAL_ChibiOS: fixed CAN on Pixhawk4 and PH4-mini
the silent pins floating disabled CAN
2019-02-09 16:02:08 +11:00
Andrew Tridgell
b72378db9c HAL_ChibiOS: setup APJ board IDs in environment 2019-02-09 12:27:35 +09:00
Randy Mackay
835c0d8991 AC_PosControl: remove unnecessary init of last_update_xy_ms 2019-02-02 11:34:38 +09:00
hongle
44da0d03d7 AP_RSSI: add V5 Nano to the RSSI_ANA_PIN param description 2019-02-02 10:34:49 +09:00
Michael du Breuil
d93eb0306d AP_RSSI: Remove APM doc references 2019-02-02 10:34:48 +09:00
Randy Mackay
df4dcf3c8f AC_PosControl: constify dt calcs 2019-02-02 10:34:47 +09:00
Randy Mackay
0929d0333b AC_WPNav: use dt from pos controller 2019-02-02 10:34:46 +09:00
Randy Mackay
4f74075e53 AC_PosControl: increase accuracy of dt calcs 2019-02-02 10:34:45 +09:00
Peter Barker
2550c9922d AP_RSSI: make RSSI work on ChibiOS 2019-02-01 14:01:10 +09:00
Rob Ratcliff
6af9be44a7 RC_Channel: treat UINT16_MAX as a value of 0 in set_override
Addresses ignore R/C override issue documented here:
https://github.com/ArduPilot/ardupilot/issues/1667
2019-01-24 11:20:10 +09:00
Andrew Tridgell
fa365b6f8d HAL_ChibiOS: disable USART6_TX on fmuv5
this prevents it acting as a pullup on SBUS input for Pixhawk4. Thanks
to David Sidrane for the suggestion.

This also enables the extra 3 PWMs for PH4-mini
2019-01-18 09:45:00 +11:00
Andrew Tridgell
55e362e470 AP_HAL_ChibiOS: Fix FMUv2 LED lighting up 2019-01-14 12:22:47 +11:00
Andrew Tridgell
d9b6c6e0c9 AP_RCProtocol: on DSM sync error don't reset channel count
this fixes the issue noticed by Andreyl in 3.6.5rc1
2019-01-14 12:05:29 +11:00
Andrew Tridgell
bbe09c4b59 AP_BoardConfig: fixed build 2019-01-11 12:02:59 +11:00
Andrew Tridgell
ee87621ed4 HAL_ChibiOS: fixes for DrotekP3Pro 2019-01-11 12:02:59 +11:00
Kevin Lopez Alvarez
71412f4deb AP_BoardConfig: add ChibiOS FMUv4pro defines 2019-01-11 12:02:59 +11:00
Kevin Lopez Alvarez
85e79f87f6 AP_HAL: add ChibiOS FMUv4pro 2019-01-11 12:02:59 +11:00
Kevin Lopez Alvarez
dd66c8919c HAL_ChibiOS: add MCU tables for STM32F469 2019-01-11 12:02:59 +11:00
Kevin Lopez Alvarez
3a06e866a7 HAL_ChibiOS: add DrotekP3Pro hardware definitions 2019-01-11 12:02:59 +11:00
Andrew Tridgell
9ed3e9eec5 HAL_ChibiOS: fixed build of sdcard 2019-01-11 09:48:16 +09:00
Andrew Tridgell
a03b569d43 DataFlash: allow startup with no microSD
this allows logging to work with insert after boot
2019-01-11 09:48:16 +09:00
Andrew Tridgell
02987b7614 HAL_ChibiOS: try to mount microSD after boot 2019-01-11 09:48:16 +09:00
Andrew Tridgell
638b3b80d2 HAL_ChibiOS: log stdout to USB on mindpx-v2 2019-01-11 09:48:16 +09:00
Andrew Tridgell
ff67c83bc1 HAL_ChibiOS: allow mount of microSD after boot
when disarmed, try to mount sd card every 3s
2019-01-11 09:48:16 +09:00
Andrew Tridgell
da21947fe9 HAL_ChibiOS: fixed card inserted test for SDC 2019-01-11 09:48:16 +09:00
Andrew Tridgell
bccddf3701 AP_BoardConfig: added BRD_SD_SLOWDOWN parameter
allows for reduction in microSD clock speed
2019-01-11 09:48:16 +09:00
Andrew Tridgell
6fb84cfa6b HAL_ChibiOS: support microSD slowdown
allow use of BRD_SD_SLOWDOWN to slow down clock on microSD
2019-01-11 09:48:16 +09:00
Andrew Tridgell
e1889fbf66 AP_HAL: added set_slowdown() to SPIDevice
used to slow down a SPI device below normal high speed operation
2019-01-11 09:48:16 +09:00
Andrew Tridgell
058980a94d AP_HAL: added fs_init() to Util API 2019-01-11 09:48:16 +09:00
Andrew Tridgell
32d0137c08 AP_RCProtocol: bring up to date with master
this adds new RC protocol decoders for SRXL, SUMD and ST24 as well as
updating to latest soft-serial decoder
2019-01-11 09:31:27 +09:00
Siddharth Purohit
043c303146 HAL_ChibiOS: add CubePurple/PH2Slim board config 2019-01-11 09:16:16 +09:00
Andrew Tridgell
0ee8a8d93c HAL_ChibiOS: switched fmuv5 firmware to ChibiOS IO fw
so users installing fmuv5 on a Pixhawk4 get the SBUS fixes
2018-12-31 08:10:19 +11:00
Andrew Tridgell
f303e5b659 HAL_ChibiOS: fixed safety switch and LEDs on PH4-mini
fixes #10127
2018-12-31 08:06:43 +11:00
Randy Mackay
6a0b56ee77 AP_Mount: fix extreme gimbal movements before TX is turned on 2018-12-20 09:02:02 +09:00
bnsgeyer
9ac8e98161 AP_Motors: Dualheli- fix bug for scaling second swashplate 2018-12-18 09:15:28 +09:00
Andrew Tridgell
2c75272019 HAL_ChibiOS: setup PH4 for right voltage scaling 2018-12-18 11:02:18 +11:00
Randy Mackay
a9982be6fc AP_OpticalFlow: remove unnecessary init from CSOF and add comments
also replace greater-than-zero with is_positive
2018-12-17 09:08:27 +09:00
Randy Mackay
c3407ab598 AP_OpticalFlow: driver for Cheerson CX-OF 2018-12-17 09:07:07 +09:00
Randy Mackay
4efd434357 AP_SerialManager: add optical flow to list of protocols 2018-12-17 09:05:35 +09:00
Randy Mackay
123128deac GCS_Common: optical flow comp fields should include flow 2018-12-17 09:05:27 +09:00
Andrew Tridgell
1b19d09653 AP_InertialSensor: fixed orientation of 2nd OmnibusF7V2 IMU 2018-12-17 09:01:07 +09:00
Randy Mackay
5d8b2002f1 AP_Follow: add get bearing and distance accessors
used for reporting purposes
2018-12-17 08:59:22 +09:00
Randy Mackay
0107600c69 AP_Follow: move enabled accessor to top of definition file 2018-12-17 08:59:18 +09:00
Randy Mackay
2aeac20772 AP_Follow: remove send-text to GCS 2018-12-17 08:59:13 +09:00
Andrew Tridgell
02d05d2e76 AP_Follow: fixed handling of FOLL_SYSID parameter
removed separate variable and use parameter only
2018-12-17 08:56:15 +09:00
Andrew Tridgell
258f472028 HAL_ChibiOS: detect stuck I2C bus and clear with SCL
This detects the I2C bus becoming stuck with SDA low after a timeout
and clears the bus by toggling SCL. Many thanks to @jhw84 for the
suggestion
2018-12-14 15:49:11 +11:00
Andrew Tridgell
3ffee081a4 HAL_ChibiOS: added palReadLineMode() function
used to change and restore line modes
2018-12-14 15:49:08 +11:00
Andrew Tridgell
22ed074030 AP_OSD: fixed fonts for new font system 2018-11-29 15:35:50 +11:00
Andrew Tridgell
5e162cb0e1 HAL_ChibiOS: use ChibiOS IO firmware for Pixhawk4 2018-11-28 09:12:19 +11:00
Andrew Tridgell
352a7667a7 HAL_ChibiOS: allow ROMFS to override a file
this allows a hwdef.dat with an include to change an embedded file
specified in the include
2018-11-28 09:10:10 +11:00
Matt
d3edb53fcd AP_BattMonitor: Increase solo's power off button delay time
The Solo battery's power button needs to be held to power off. The
debounce time before it plays the power off tone is too low.
Occasionally it causes the user to not hold the button long enough.
This corrects the delay before playing the power off tone.
2018-11-24 11:13:25 +09:00
Randy Mackay
af220a2118 AP_RangeFinder: benewake tfmini always provide cm distances
a misunderstanding of the datasheet led to the mistaken idea that while in short-range-mode the distances were returned in millimeters
2018-11-22 08:58:14 +09:00
Randy Mackay
ed3ed7270c RangeFinder: benewake buffer uses uint8_t 2018-11-19 11:46:28 +09:00
Andrew Tridgell
dbae45e868 AP_RCProtocol: fixed DSM parser for 8 channels
this ensures we remember channels from the previous frame, avoiding a
bug with more than 7 channels
2018-11-19 11:37:40 +09:00
Andrew Tridgell
4f82f574e9 AP_RPM: set pin to input before attaching interrupt
this fixes input on AUX6 on CubeBlack
2018-11-15 12:38:22 +11:00
Randy Mackay
4de971b879 AP_RangeFinder: fix benewake checksum check 2018-11-15 09:49:18 +09:00
Randy Mackay
8fdb67d955 DataFlash: log rangefinder status in RFND msg 2018-11-15 09:49:14 +09:00
Randy Mackay
54494a71e6 AP_RangeFinder: benewake returns at least 12m or 22m when out-of-range
value logged and shown to the user will be at least 12m for TFmini or 22m for TF02 which ensure the user won't see the range drop even if they have configured a very short useable distance
2018-11-15 09:49:11 +09:00
Randy Mackay
bb61b7e5e9 AP_RangeFinder: benewake logic reordering
this should be a non-functional change
2018-11-15 09:47:57 +09:00
Randy Mackay
54717c4f53 AP_RangeFinder: benewake lidar returns max range + 1m when out-of-range
also returns out-of-range when signal is weak
2018-11-15 09:47:30 +09:00
Randy Mackay
b579a36d8d AP_RangeFinder: Benewake driver discards distances over 327m 2018-11-06 12:32:11 +09:00
Peter Barker
46b035419e DataFlash: add sanity checks around EraseAll 2018-11-06 12:31:02 +09:00
Peter Barker
85b46ea103 GCS_MAVLink: allow vehicles to override VFR_HUD.alt 2018-11-06 12:19:28 +09:00
Andrew Tridgell
0717dddc46 HAL_ChibiOS: bring copter stable up to date with hwdef.dat
this fixes GPIO numbering, fixes terrain on some boards and adds some
new boards
2018-11-05 19:36:40 +11:00
Andrew Tridgell
d8fd590a3f AP_IOMCU: fixed a race in event trigger on startup
this fixes the issue with initial safety option state, and with
initial safety mask
2018-11-05 17:26:28 +09:00
Andrew Tridgell
b55df3a8ee HAL_ChibiOS: ensure RC in channels are bounded 2018-11-05 17:24:19 +09:00
Andrew Tridgell
e4a4828203 HAL_ChibiOS: fixed LED mapping for fmuv4 2018-10-29 14:07:30 +11:00
Nghia Nguyen
f0a7df7cf9 AP_Rangefinder: Add support for Garmin LidarLite-V3HP 2018-10-27 11:18:00 +01:00
Randy Mackay
4eee1fc06a AC_Fence: get_polygon_points does not include return point 2018-10-26 15:21:24 +09:00
Randy Mackay
5082d43b0c AC_Avoid: constify a few local variables 2018-10-26 15:21:22 +09:00
Randy Mackay
55dff47d75 AC_Avoid: stop includes margin for intersection calc
the simpler stop feature (as opposed to slide) was not including the margin when looking for intersections with the boundary meaning it could slow too late
2018-10-26 15:21:18 +09:00
Randy Mackay
0e0472054a AP_Proximity: increase MAV driver timeout to 500ms
this comes after testing with ROS/mavros and discovering the update rate is only 4hz
2018-10-26 15:21:14 +09:00
Randy Mackay
d9ed07919c AP_RangeFinder: check I2C dev during detect 2018-10-26 15:20:54 +09:00
JIMWAR
bd353db8ab AC_Avoid: fix adjust_velocity_polygon
adjust_velocity_polygon function ignoring boundary[0]
2018-10-26 15:19:57 +09:00
Andrew Tridgell
f4c4f061b8 AP_Notify: fixed PixracerLED on NuttX
led_dim must be a positive number, and is not related to the led off
value
2018-10-26 15:18:53 +09:00
Andrew Tridgell
114318a9e3 AP_HAL: fixed PX4 LED polarity 2018-10-26 15:18:53 +09:00
Andrew Tridgell
6df32d6851 AP_Notify: init gpio state for LEDs 2018-10-26 15:18:53 +09:00
Andrew Tridgell
694543e8b2 AP_Notify: fixed px4-v4 to use pixracer LED driver 2018-10-26 15:18:53 +09:00
Randy Mackay
6e8e3cdbb2 AP_HAL_ChibiOS: update kakutef7 hwdef
This makes the kakutef7 the same as master commit bb99165
2018-10-26 16:16:36 +10:00
Randy Mackay
e8e82e99d3 AP_HAL_ChibiOS: fix safety switch option handling 2018-10-05 10:25:11 +09:00
Andrew Tridgell
4a1348a432 HAL_ChibiOS: fixed a race in DShot code
this fixes a problem found by Daniel Met with the copter 3.6 beta
release
2018-10-05 10:24:59 +09:00
Michael du Breuil
62f997d73c AP_AHRS: Internalize EKF getLLH altitude management 2018-10-05 10:23:53 +09:00
Michael du Breuil
294737abc8 AP_NavEKF3: Fix roundoff, and missing offset handling of getLLH 2018-10-05 10:23:50 +09:00
Michael du Breuil
85e3aea8b7 AP_NavEKF2: Fix roundoff, and missing offset handling of getLLH 2018-10-05 10:23:48 +09:00
Andrew Tridgell
1fd5017fab AP_Compass: use rotation_equal() from AP_Compass 2018-10-01 14:29:08 +09:00
Andrew Tridgell
e90e89b687 AP_Math: added rotation_equal() 2018-10-01 14:29:05 +09:00
Andrew Tridgell
2ad2bb43f8 AP_Compass: fixed handling of duplication rotations
we have some rotations that are duplicated, such as ROLL_180_YAW_90
and PITCH_180_YAW_270. This copes with those in the auto-orientation
code
2018-10-01 14:29:02 +09:00
Randy Mackay
d78c7631d4 Compass: fix compile warning in calibrator output 2018-10-01 14:28:55 +09:00
Andrew Tridgell
2f637225f2 HAL_ChibiOS: fixed RSSI voltage from IOMCU 2018-10-01 11:54:43 +09:00
Leonard Hall
4679afdf31 AC_AttitudeControl: Add missing variable initalisations 2018-09-15 10:16:25 +09:00
Leonard Hall
dfa20484fa AC_PID: Fix D term initialisation 2018-09-15 10:16:04 +09:00
Michael du Breuil
a3a8783e28 AC_AttitudeControl: Use reset_rate_controller_I_terms() helper 2018-09-15 10:16:02 +09:00
Randy Mackay
5904393170 AP_Arming: rename rudder_arming to get_rudder_arming_type 2018-09-15 10:12:44 +09:00