Leonard Hall
|
b45b07d539
|
Copter: Fix rate input frame and clarify SET_ATTITUDE_TARGET
|
2024-06-26 11:22:54 +10:00 |
Peter Barker
|
180484e0a6
|
ArduCopter: add Copter flight option for requiring position to arm
this is not quite the same as requiring a good position to arm.
|
2024-06-25 11:06:10 +10:00 |
Iampete1
|
44710e8576
|
Copter: `update_target_location` reject alt frame change per plane
|
2024-06-25 08:29:57 +09:00 |
TsuyoshiKawamura
|
a95b5bc0dc
|
Copter: leave old_loc check instead of changing alt frame.
|
2024-06-25 08:29:57 +09:00 |
TsuyoshiKawamura
|
8346203d43
|
Copter: simplify update_target_location
|
2024-06-25 08:29:57 +09:00 |
rtos-kawamura
|
34748e681f
|
Copter: simplify get_target_location
Co-authored-by: Peter Hall <33176108+IamPete1@users.noreply.github.com>
|
2024-06-25 08:29:57 +09:00 |
TsuyoshiKawamura
|
5f5e0e65e0
|
Copter: implement get_target_location/update_target_location for lua
|
2024-06-25 08:29:57 +09:00 |
Peter Barker
|
3630e772b1
|
Copter: add Copter::option_enabled(...) replacing bitops vs copter.g2.flight_options
|
2024-06-20 10:59:14 +10:00 |
Peter Barker
|
e34c91d1aa
|
Copter: tidy use 'else if' to avoid unnecessary complication in location arm checks
|
2024-06-19 17:27:37 +10:00 |
richaravoil
|
b782d24f87
|
ArduCopter: get MAV_STATE_BOOT on reboot
Co-authored-by: Peter Hall <33176108+IamPete1@users.noreply.github.com>
|
2024-06-18 20:22:29 +09:00 |
chobits tai
|
3b24530cc2
|
Copter: fix MAV_CMD_CONDITION_YAW with relative angle when WP_YAW_BEHAVIOR = 0
|
2024-06-18 10:52:01 +09:00 |
Iampete1
|
4ab24dc015
|
ArduCopter: use new ModeReason::AUX_FUNCTION
|
2024-06-18 09:49:20 +10:00 |
Peter Barker
|
136e76e5ea
|
Copter: tidy failsafe action handling
Mode changes will not work when mode not compiled in
|
2024-06-17 10:24:59 +10:00 |
muramura
|
c376781c08
|
Copter: Clear the counter when rudder arm operation is disabled
|
2024-06-17 09:56:22 +10:00 |
muramura
|
9135f01a93
|
Copter: Move to the processing section to be used
|
2024-06-17 08:03:38 +09:00 |
Iampete1
|
1853f07793
|
ArduCopter: 4.5.4 release notes
|
2024-06-15 09:19:56 +09:00 |
Peter Barker
|
72fa6aa410
|
ArduCopter: clarify frame of get_location_from_origin_offset
... by renaming it get_location_from_origin_offset_NED
|
2024-06-11 14:57:56 +10:00 |
muramura
|
da3a9c1cc6
|
Copter: Enable processing
|
2024-06-11 09:17:59 +10:00 |
muramura
|
5107cb495a
|
Copter: Change the sub-mode description
|
2024-06-11 09:14:31 +10:00 |
Peter Barker
|
cb869ef7f0
|
ArduCopter: remove defaulting of OSD_ENABLED
we do this in AP_OSD_config.h too so include ordering can break things badly
|
2024-06-04 16:32:26 +10:00 |
Andrew Tridgell
|
7551236854
|
ArduCopter: use NEW_NOTHROW for new(std::nothrow)
|
2024-06-04 09:20:21 +10:00 |
Peter Barker
|
1c5a026e3e
|
Copter: ModeGuided: add an option_is_enabled method, use it
|
2024-05-29 13:11:58 +10:00 |
Randy Mackay
|
53f37a7457
|
Copter: 4.5.3 release notes
|
2024-05-28 13:19:03 +09:00 |
MattKear
|
ae38c96a04
|
Copter: use new surface distance library
|
2024-05-28 09:55:36 +10:00 |
Peter Barker
|
fcebd0c8c2
|
Copter: avoid Guided submode change unless can change Loc to Vec-from-origin
ordering problem between changing the submode and setting a valid position
|
2024-05-22 17:10:12 +09:00 |
Peter Barker
|
76950b5994
|
ArduCopter: remove redundant @Values from parameter documentation
|
2024-05-21 14:27:05 +10:00 |
Andrew Tridgell
|
2bcc2b296d
|
ArduCopter: update release notes for 4.5.3-beta1
|
2024-05-16 11:04:32 +10:00 |
bnsgeyer
|
a1a5647b7f
|
Copter: change input_loiter_xxx to input_vel_xxx in sysid mode
|
2024-05-14 23:16:52 -04:00 |
bnsgeyer
|
bbaf557457
|
Copter: implement suggested changes
|
2024-05-14 23:16:52 -04:00 |
bnsgeyer
|
9e4340ba33
|
Copter: change position controller method for making inputs
|
2024-05-14 23:16:52 -04:00 |
bnsgeyer
|
75d9163571
|
Copter: fixes for suggested changes
|
2024-05-14 23:16:52 -04:00 |
bnsgeyer
|
d0dfe86a4b
|
Copter: incorporate comment to remove unnecessary function
|
2024-05-14 23:16:52 -04:00 |
bnsgeyer
|
f74ccd569a
|
Copter: Added new input types for SID_AXIS parameter
|
2024-05-14 23:16:52 -04:00 |
bnsgeyer
|
d0cf2240dc
|
Copter: clean up
|
2024-05-14 23:16:52 -04:00 |
bnsgeyer
|
ad75c0c1d8
|
Copter: simplification of system ID
|
2024-05-14 23:16:52 -04:00 |
bnsgeyer
|
1bf865e4eb
|
Copter: add support for sysid of vel and pos loops
|
2024-05-14 23:16:52 -04:00 |
Randy Mackay
|
5c50da7f9f
|
Copter: 4.5.2 release notes
|
2024-05-14 16:48:02 +09:00 |
muramura
|
07a5f61782
|
Copter: Change from enum to class
|
2024-05-07 20:27:15 +09:00 |
Iampete1
|
f54f7d7dc6
|
Copter: `euler_rate_to_ang_vel` takes Quaternion attitude
|
2024-05-07 08:34:40 +09:00 |
haarshitgarg
|
a13639d9d8
|
ArduCopter: enabled sending waypoints from a companion computer to ardupilot for copter and rover
Signed-off-by: Ryan Friedman <ryanfriedman5410+github@gmail.com>
|
2024-05-02 09:08:34 +09:00 |
Andrew Tridgell
|
e417be0492
|
Copter: update release notes
|
2024-05-01 17:24:10 +09:00 |
Randy Mackay
|
cc3bb402e4
|
Copter: 4.5.2-beta1 release notes
|
2024-05-01 17:24:10 +09:00 |
Peter Barker
|
0d7925059c
|
ArduCopter: move handling of AP_Radio RC input down into AP_RCProtocol
|
2024-05-01 17:51:49 +10:00 |
Leonard Hall
|
127f1296de
|
Copter: Land Detector: add hash define for LAND_DETECTOR_VEL_Z_MAX
|
2024-04-30 10:21:29 +09:00 |
lthall
|
797dfdd0ed
|
Copter: Land Detector: Include angle checks
|
2024-04-30 10:21:29 +09:00 |
Iampete1
|
5b9848c5e1
|
Copter: support `DO_RETURN_PATH_START`
|
2024-04-30 08:03:39 +09:00 |
Randy Mackay
|
6f6bc21e2e
|
Copter: guided mode fix for landing detector internal error
|
2024-04-23 15:11:24 +09:00 |
Peter Barker
|
b173662b3c
|
ArduCopter: remove Baro accumulate API
no backend actually needs to be prodded, everything is done on timers
|
2024-04-18 09:19:20 +10:00 |
Peter Barker
|
00433a2625
|
ArduCopter: move Arming, Beacon and RC_Mapper into ardupilotwaf.py
these were built for all vehicles, so put them in the common list
|
2024-04-17 18:11:46 +10:00 |
Peter Barker
|
5b69ff6e65
|
Copter: send RC_CHANNELS in SITL in compassmot loop
When setting an RC value in autotest, we require the change to appear in this message
|
2024-04-16 19:14:38 +10:00 |