Randy Mackay
192286f04d
Rover: create Mission object
2014-03-19 12:11:27 +09:00
Andrew Tridgell
eac4b1ec96
Rover: fixed EKF usage for rover
...
added barometer object, and use shared home object from AHRS. This
gives basic EKF operation.
2014-02-24 09:25:50 +11:00
Randy Mackay
bb0995f7d8
Rover: add EKF params to full param list
2014-02-21 13:51:34 +09:00
Andrew Tridgell
4e2d5043ba
Rover: added PIVOT_TURN_ANGLE parameter
...
this allows skid steering rovers to turn on the spot for sharp turns
2014-02-17 10:11:40 +11:00
Andrew Tridgell
89c99ce145
Rover: enable AP_BoardConfig
2014-01-20 17:06:28 +11:00
Andrew Tridgell
fe0e627304
Rover: changed SERIAL3_BAUD to SERIAL1_BAUD
...
and add SERIAL2_BAUD for systems that have it
2013-11-26 13:00:03 +11:00
Andrew Tridgell
14a0f8f46d
Rover: added support for uartD
2013-11-25 11:21:52 +11:00
Andrew Tridgell
c20d0e8152
Rover: added SKIP_GYRO_CAL option
2013-10-21 09:56:00 +11:00
Randy Mackay
121e4932ea
Rover: integrate BattMonitor
2013-10-03 11:16:29 +09:00
Andrew Tridgell
d000cd2320
Rover: switched to new steering controller
...
this uses a steering rate controller, based upon the planes roll
controller
2013-09-09 18:04:41 +10:00
Andrew Tridgell
ecccc05eed
Rover: added STEERING_LEARN parameter
...
when enabled (set to 1) it will learn TURN_CIRCLE based on the
demanded and actual lateral acceleration
2013-09-09 18:04:40 +10:00
Andrew Tridgell
97ed733ada
Rover: use L1 controller for navigation
...
this uses the AP_L1_Control library for rover navigation
2013-09-09 18:04:40 +10:00
Andrew Tridgell
8c7619a837
Rover: moved camera parameter indexes
...
this prevents a conflict with some old parameters
2013-07-15 10:25:04 +10:00
Andrew Tridgell
5b88334dbb
Rover: added full camera and mount support
2013-07-15 09:57:00 +10:00
Andrew Tridgell
135146c735
Rover: added LEARN_CH parameter
...
this allows the learning channel to be set, for transmitters where
setting up channel 7 is difficult
2013-07-01 10:10:38 +10:00
Andrew Tridgell
a5586ec394
Rover: enable RELAY_* parameters
2013-06-25 12:48:58 +10:00
Andrew Tridgell
2d795ac85a
Rover: convert to use AP_Scheduler
...
this gives us better timing information and scheduling, while also
making the code easier to read
2013-06-04 10:37:05 +10:00
Andrew Tridgell
5a9485a419
Rover: support RCMAP_* mapping for steering/throttle
2013-06-03 19:33:59 +10:00
Andrew Tridgell
3f9ade2b1f
Rover: added INITIAL_MODE option
...
this should be useful for sparkfun comp
2013-05-03 08:08:30 +10:00
Andrew Tridgell
ad7e8bd9c4
Rover: added SONAR_DEBOUNCE option
...
this allows us to debounce the sonar triggering, which will make it
handle noise better
2013-03-29 10:49:08 +11:00
Andrew Tridgell
3bed733f56
Rover: added AUTO_KICKSTART and AUTO_TRIGGER_PIN options
2013-03-22 09:38:25 +11:00
Andrew Tridgell
47890dfa72
Rover: added dual sonar support
2013-03-22 08:49:51 +11:00
Andrew Tridgell
065cac76c0
Rover: use new sonar enabled flag in object
2013-03-22 07:53:16 +11:00
Andrew Tridgell
0dde0b3551
Rover: initial implementation of skid steering for APMrover2
...
this adds SKID_STEER_IN and SKID_STEER_OUT parameters for controlling
skid skeering control and output
2013-03-15 11:04:33 +11:00
Andrew Tridgell
2294de85ac
Rover: removed INPUT_VOLTS parameter
...
no longer needed
2013-03-08 10:01:51 +11:00
Andrew Tridgell
6dd549dea8
Rover: removed SONAR_TYPE option
...
now set the values in the object
2013-03-01 12:59:31 +11:00
Andrew Tridgell
12d73a8662
Rover: use new AP_RangeFinder_analog class
2013-03-01 12:00:48 +11:00
Andrew Tridgell
be3b2ee9f8
Rover: cleaned up sonar_trigger_cm parameter
2013-03-01 07:47:26 +11:00
Andrew Tridgell
66abee5544
Rover: added more sonar parameters
...
better control over obstacle avoidance
2013-03-01 07:18:25 +11:00
Andrew Tridgell
bf6198be40
Rover: tweaked parameters and added SPEED_TURN_GAIN and SPEED_TURN_DIST
2013-02-22 08:38:13 +11:00
Andrew Tridgell
6cf4d11e33
Rover: cleanup parameter names and remove dead parameters
2013-02-09 20:36:26 +11:00
Andrew Tridgell
f1ff27ed08
Rover: major restructuring
...
this removes a lot of the old arduplane code, and renames a lot of
variables.
This will need a lot more testing and fixup before being usable
2013-02-08 09:21:22 +11:00
Andrew Tridgell
aff5b1559d
Rover: added SERIAL0_BAUD parameter
2013-01-20 22:12:57 +11:00
Andrew Tridgell
b284d4c21e
Rover: first cut at porting rover to AP_HAL
2012-12-20 14:52:34 +11:00
Andrew Tridgell
1f8a61615c
Rover: added more parameter docs
2012-11-28 11:42:51 +11:00
Andrew Tridgell
aac088dc5b
Rover: removed closed loop nav
...
use a jump in the mission instead
2012-11-28 10:42:10 +11:00
Andrew Tridgell
691d19dd98
Rover: more cleanup, and fixed navigation code
...
removed loiter code
2012-11-28 09:35:42 +11:00
Andrew Tridgell
a16ba57467
Rover: cleaned up a bunch more plane cruft
...
removed elevon and flap support
2012-11-28 09:35:42 +11:00
Andrew Tridgell
b2899dc9c4
Rover: added in sitl object, needed for throttle control
2012-11-27 23:20:25 +11:00
Andrew Tridgell
16b5b00368
Rover: removed inverted flight support
2012-11-17 18:03:17 +11:00
Andrew Tridgell
abc0a1cd38
Rover: major update, fixing lots of bugs
...
This removes a lot of the ArduPlane specific cruft left over from the
initial Rover import from ArduPlane, plus fixes a bunch of serious
bugs. For example, the rover was unable to use either compass or gps
for heading - it used just gyros!
There is still a lot of cruft left, but this at least gives a bit
better basis for future work
2012-11-17 17:45:30 +11:00
rmackay9
e877a58b60
APMRover: fixes to incorporate accelerometer calibration
2012-11-07 19:21:20 +09:00
Andrew Tridgell
97aa98015d
Rover: added TELEM_DELAY to rover code
2012-08-30 09:36:18 +10:00
Andrew Tridgell
dfac01e6f1
AP_Param: updated APMrover2 code for new AP_Param syntax
2012-08-08 12:12:29 +10:00
Andrew Tridgell
1b099344a3
Rover: fixed build with new RC_Channel code
2012-08-08 12:11:05 +10:00
Andreas M. Antonopoulos
d4a0cb5db1
Added Michael Pursifull's Maxsonar HRLV model support
2012-07-11 18:46:47 -07:00
Jean-Louis Naudin
9355a159fc
APMrover v2.20 - use RangeFinder optical SharpGP2Y instead of ultrasonic sonar
...
Signed-off-by: Jean-Louis Naudin <jlnaudin@gmail.com>
2012-06-13 08:29:32 +02:00
Jean-Louis Naudin
408d3dfa98
APMrover v2.1.6 - Added Speed Booster between wp and soft start
...
Signed-off-by: Jean-Louis Naudin <jlnaudin@gmail.com>
2012-05-17 18:42:16 +02:00
Robert Lefebvre
10b5d758f8
Changed software ID from 0 to 20 for ArduRover V2 Divergence.
...
Also changed definition of flight mode 2 from Stabilize to Learning.
2012-05-14 15:21:29 -04:00
Jean-Louis Naudin
4a4402556b
APMrover v2.1.3 :
...
Added option (hold roll to full right + SW7 ON/OFF) to init_home during the wp_list reset
Add ROV_SONAR_TRIG (default = 200 cm) - tested by Franco
Restart_nav() added and heading bug correction, tested OK in the field
RTL then stop update - Tested OK in the field
Added SONAR detection for obstacle avoidance
Signed-off-by: Jean-Louis Naudin <jlnaudin@gmail.com>
2012-05-14 17:47:08 +02:00