Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
14,476 Commits 70 Branches 507 Tags 663 MiB
Commit Graph

141 Commits

Author SHA1 Message Date
Andrew Tridgell 1e3c23e5a3 Plane: on takeoff set prev_WP_loc to current_loc 2015-01-03 14:07:02 +11:00
Andrew Tridgell ae96a48efc Plane: use location_path_proportion() 
this should produce better glide slopes when the aircraft is off
course
 2015-01-01 15:17:45 +11:00
Andrew Tridgell c05a0bc67f Plane: prevent a change altitude command from causing a sudden descent 
when a change altitude command comes in while a large glide slope
altitude change is present we could end up using the old glide slope
with the new altitude. This resets the altitude offset, causing a
direct altitude change
 2014-12-03 18:31:23 +11:00
Andrew Tridgell 19847d8607 Plane: fixed missing break statement 2014-11-25 13:15:25 +11:00
Michael Day 8662aaa878 Plane: Support MAV_CMD_DO_FENCE_ENABLE as a mission item. 2014-11-25 13:02:47 +11:00
Andrew Tridgell 77958f8fd4 Plane: fixed CONTINUE_AND_CHANGE_ALT command 
current_loc should be used, not prev_WP_loc
 2014-11-25 10:44:02 +11:00
Michael Day 95d2e79312 Plane: Keep throwing WP in front plane for CONTINUE_AND_CHANGE_ALT 2014-11-25 10:43:15 +11:00
Michael Day 442c188ae0 Plane: Implementation of MAV_CMD_CONTINUE_AND_CHANGE_ALT. 2014-11-25 10:43:15 +11:00
Arthur Benemann fe9e68f88c Plane: send feedback to the GCS of pictures taken 2014-11-11 10:31:54 -08:00
Andrew Tridgell 1f3e285ed0 Plane: reset commanded_go_around at start of land 
this allows multiple landing attempts
 2014-10-24 22:04:30 +11:00
Michael Day 01f611daa9 Plane: "Go around" operation. Assumes go around behavior follows land wp. 2014-10-24 21:51:46 +11:00
Andrew Tridgell 8d329f6b5a Plane: ignore DO_LAND_START in missions 2014-10-20 08:36:20 +11:00
Michael Day fe43ae538f Plane: Added support for MAV_CMD_DO_LAND_START 2014-10-20 08:36:19 +11:00
Andrew Tridgell 71d786187e Plane: make auto takeoff independent of compass 
this solves a problem of poor initial yaw due to poor compass offsets
causing a takeoff to not be in the direction the plane is pointing. A
summed gyro is used until the GPS speed is above 5m/s for 2 seconds,
then the GPS heading corrected by the summed gyro error is used for L1
based navigation for the rest of the takeoff
 2014-10-07 07:17:46 +11:00
Andrew Tridgell bf80a2485f Plane: support acceptance radius for waypoints 2014-09-03 12:38:30 +10:00
Andrew Tridgell dad95648a0 Plane: split landing code into landing.pde 
this is in preparation for more complex landing code using the
rangefinder
 2014-08-13 21:38:05 +10:00
Andrew Tridgell 7def71d43a Plane: improved landing approach and flare 
flare if we are within the specified time of landing either vertically
or horizontally
 2014-08-13 21:38:05 +10:00
Andrew Tridgell 165993dbf5 Plane: allow steering right through the landing 
this allows a small degree of steering right through the landing,
which makes it possible to have a turn just before landing
 2014-08-13 21:35:26 +10:00
Andrew Tridgell d54bb68270 Plane: prevent cross-track on some WP types 
when finishing a takeoff or when a user forces a WP change don't do
any cross-tracking. This avoids a problem where the plane tries to
line up with a track completely unrelated to the track currently being
flown
 2014-08-04 21:02:13 +10:00
Andrew Tridgell 16f1c6867f Plane: remved int cast 
not portable
 2014-08-04 21:02:13 +10:00
Andrew Tridgell 8610d9a8ea Plane: added GLIDE_SLOPE_MIN parameter 
this is used to prevent slow glide slopes being used for small
altitude changes in missions. This allows more accurate tracking of
altitude with terrain changes
 2014-08-04 21:02:13 +10:00
Andrew Tridgell f983040401 Plane: more fixes for glide slope calculations 2014-08-04 21:02:13 +10:00
Andrew Tridgell 3e320d71ab Plane: added TERRAIN_FOLLOW parameter 
when enabled RTL, CRUISE and rally points will use terrain altitude
 2014-07-24 21:50:19 +10:00
Andrew Tridgell d18c00d6fc Plane: split up altitude handling 
this creates altitude.pde for altitude handling, getting ready to add
terrain following
 2014-07-24 21:50:19 +10:00
Randy Mackay 873eb68d79 Plane: add support for DO_SET_ROI within mission 2014-07-09 21:26:02 +09:00
Randy Mackay d8573d0722 Plane: loiter num turns from low byte of p1 
This limits the maximum number of turns to 255 for plane
 2014-06-17 20:53:59 +10:00
Randy Mackay ac65119cfe Plane: use common Log_Write_Camera 
pair programmed with Craig Elder
 2014-06-17 14:11:47 +10:00
Andrew Tridgell ea086fa79c Plane: added MAV_CMD_DO_INVERTED_FLIGHT support 
allows for mission control over inverted flight
 2014-06-05 16:12:10 +10:00
Andrew Tridgell 55e7f9b1d6 Plane: calculate next_turn_angle to prevent early WP completion 
this should help for ball drop and camera trigger with straight line
runs
 2014-06-05 09:35:09 +10:00
Andrew Tridgell 0306dbf5f1 Plane: moved auto mode variables to auto_state 2014-04-27 15:34:30 +10:00
Michael Day 568fc9e6c9 Plane: Now using AP_Rally library. 2014-04-19 09:16:05 +10:00
Andrew Tridgell e19341ca32 Plane: convert to new GPS driver API 2014-04-01 06:38:24 +11:00
Michael Day 25f23cf16c Plane: Sends MAV_SYS_STATUS_GEOFENCE and also allows GCS to enable/disable fence. 2014-03-27 09:26:20 +11:00
Andrew Tridgell ce3f40b095 Plane: use should_log() for more msgs 2014-03-19 14:18:14 +11:00
Randy Mackay 3ce56f3086 Plane: integrate Mission cmd field changes 2014-03-19 12:14:24 +09:00
Randy Mackay 2184ff1e58 Plane: set_next_WP fn accepts Location 2014-03-19 12:13:06 +09:00
Randy Mackay ce9f2ef7f0 Plane: minor command logic comments and reordering 2014-03-19 12:13:01 +09:00
Randy Mackay ad4f30e790 Plane: use mission command specific structures 2014-03-19 12:12:52 +09:00
Randy Mackay 9ef920b0be Plane: integrate dataflash Log_Write_MavCmd 2014-03-19 12:12:45 +09:00
Andrew Tridgell 4bf140aeac Plane: make next_WP and prev_WP be locations 
having a command ID in them doesn't really make sense

Pair-Programmed-With: Randy Mackay <rmackay9@yahoo.com>
 2014-03-19 12:12:39 +09:00
Randy Mackay 6b789cd711 Plane: rename next_nav_command to auto_rtl_command 
This command is only used to get the vehicle home (or to a rally point)
after the mission has completed
 2014-03-19 12:12:30 +09:00
Andrew Tridgell 2b5bf45e83 Plane: only activate mission callbacks in AUTO mode 2014-03-19 12:12:24 +09:00
Andrew Tridgell 3277416aeb Plane: fixed relative altitudes and resuming mission 
Pair-Programmed-With: Randy Mackay <rmackay9@yahoo.com>
 2014-03-19 12:12:22 +09:00
Andrew Tridgell d4510d9b9b Plane: altitude for do_set_home() is in meters 2014-03-19 12:12:18 +09:00
Randy Mackay 790a907811 Plane: use Dataflash lib's Log_Write_Cmd 2014-03-19 12:12:08 +09:00
Randy Mackay 0827506533 Plane: remove unused WAIT_COMMAND 2014-03-19 12:11:24 +09:00
Randy Mackay 53add04d36 Plane: remove some comments in commands_logic.pde 2014-03-19 12:11:22 +09:00
Andrew Tridgell f036aa1780 Plane: fixed altitude for takeoff and takeoff heading 
fixes for AP_Mission integration

Pair-Programmed-With: Randy Mackay <rmackay9@yahoo.com>
 2014-03-19 12:11:09 +09:00
Randy Mackay 9446e9fd2e Plane: integrate AP_Mission library 2014-03-19 12:10:58 +09:00
Randy Mackay e88f1953d0 Plane: use common location options masks 2014-03-19 12:10:21 +09:00