Peter Barker
9f0e191505
GCS_MAVLink: deny attempt to do partial upload while mission transfer in progress
...
fixes an internal error where we make sure resources are not allocated before allocating upload resources.
The user may receive a DENIED message if they move a waypoint before an item has been transfered to the vehicle.
2024-05-15 12:26:34 +10:00
Andy Piper
2891b37807
AP_HAL_ChibiOS: add SDMODELV2
2024-05-15 07:27:46 +10:00
Andrew Tridgell
188df1312d
AP_Scripting: fixed float register save/restore in setjmp/longjmp
...
the register save must happen before the setjmp() call, which means
outside of the LUAI_TRY() macro. We also should be saving all 32
floating point registers
2024-05-15 06:47:44 +10:00
Andrew Tridgell
09df079c19
AP_Scripting: added example script that causes a hard fault
...
this exercises rapid fault handling
2024-05-15 06:47:44 +10:00
Andy Piper
2352990d90
AC_AutoTune: zero out D_FF during twitching
2024-05-14 16:33:38 +09:00
Iampete1
0bb51a31ea
AP_HAL_ChibiOS: remove setting of ROMFS flags
2024-05-14 10:05:51 +10:00
Ryan Friedman
2dc547bec2
AP_ExternalAHRS: Fix duplicate condition
...
Signed-off-by: Ryan Friedman <ryanfriedman5410+github@gmail.com>
2024-05-14 09:58:59 +10:00
Iampete1
9026ce065a
AP_BattMonitor: ESC: add mask
2024-05-14 09:58:04 +10:00
Andy Piper
a7d4183776
AP_HAL_ChibiOS: BLITZ Wing H743
2024-05-14 09:35:51 +10:00
Clyde McQueen
b853fe3366
AP_RangeFinder: fix Lua timeout
2024-05-14 09:26:25 +10:00
Peter Barker
bd3e58c413
GCS_MAVLink: mark as not receiving when too many items in MISSION_COUNT.count
...
we left things in the "receiving" state, which would eventually lead to a timeout, rather than just failing instanenously with the correct code.
2024-05-14 09:21:53 +10:00
Patrick José Pereira
34f5579699
AP_HAL_Linux: Remove message about base address
...
The value is the same as in the match
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2024-05-13 10:46:58 -03:00
Patrick José Pereira
6016e411e0
AP_HAL_Linux: Add support to Raspberry Pi 5
...
The Raspberry Pi 5 has a coprocessor that takes care of the IO over the BCM.
This adds support to the new RP1 processor.
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2024-05-13 10:46:58 -03:00
Patrick José Pereira
3f451b9f4c
AP_HAL_Linux: Util_RPI: Add message about unknown board
...
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2024-05-13 10:46:58 -03:00
Patrick José Pereira
4af6142933
AP_HAL_Linux: Util_RPI: Add support to RPI5 identification
...
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2024-05-13 10:46:58 -03:00
Ryan Friedman
fbb785859a
SITL: fix GPS headings
...
* Rename NMEA heading to ground_course_deg
* Rename heading() utility to ground course (it was wrong)
* Add _rad prefix to be pedantic about units
* Add missing degrees conversion in NMEA because NMEA is not SI
Signed-off-by: Ryan Friedman <ryanfriedman5410+github@gmail.com>
2024-05-12 21:06:52 +10:00
Ryan Friedman
3b1ba19640
AP_GPS: fix GPS headings
...
* If you don't wrap the heading, you can get a flyaway
Signed-off-by: Ryan Friedman <ryanfriedman5410+github@gmail.com>
2024-05-12 21:06:52 +10:00
mateksys
8c23379d45
AP_HAL_ChibiOS: add MatekG474-Periph hwdef
2024-05-10 12:54:11 +10:00
Andrew Tridgell
3050a8b0dc
HAL_ChibiOS: fixed erasing of G4 dual-bank past 256k flash
...
BKER needs to be set to bank number, lower 7 bits of page number in
PNB
2024-05-10 12:54:11 +10:00
MattKear
7b02a99d14
AP_MotorsHeli: Swash: Make motor numbers const
2024-05-09 15:19:44 -04:00
Andy Piper
8c91077c35
AP_HAL_ChibiOS: correct GPS output on MambaH743v4
2024-05-08 18:56:45 +10:00
Andrew Tridgell
b4bc6f1e2e
hwdef: added MatekL431-APDTelem
...
for using APD ESCs with serial telemetry
2024-05-08 18:19:19 +10:00
Peter Barker
972872d09f
AP_Baro: create explicit define for BARO_PROBE_EXT parameter
...
the more-than-trivial #if is needed elsewhere, so create an explicit name for it
2024-05-08 18:18:07 +10:00
Peter Barker
51dc35f6ff
AP_Mission: emit jump count even if no limit
...
previously if there was a jump limit we informed the user we were jumping and provided the current count and the limit.
This changes things so that if there's no limit we emit the same message, with the count and "unlimited" in place of the limit number
2024-05-08 17:56:56 +10:00
Randy Mackay
e605f961f2
AP_BattMonitor: torqeedo support for multiple instances
2024-05-08 17:51:09 +10:00
Randy Mackay
72718bb783
AP_Torqeedo: multi backend support
2024-05-08 17:51:09 +10:00
magate
a6995c93cc
AP_Scripting: allow revert of angular rate limits
2024-05-08 17:43:04 +10:00
muramura
3a1e07d816
Filter: Get common processes out of the way
2024-05-08 17:41:32 +10:00
Peter Barker
599ff17f34
AP_HAL_Linux: fix SPIUARTDriver to work with GPS autodetection
...
GPS auto-detection requires get_baud_rate to return non-zero. The SPIUARTDriver was returning 0.
2024-05-08 17:13:58 +10:00
MallikarjunSE
d93f9a09db
hwdef:update DMA
2024-05-08 09:04:45 +10:00
Andrew Tridgell
04c3770a77
AP_Motors: use AHRS for get_air_density_ratio()
2024-05-07 21:19:06 +10:00
Andrew Tridgell
5a439bb9b7
AP_AHRS: added get_air_density_ratio()
2024-05-07 21:19:06 +10:00
Andrew Tridgell
b4ebae5e1b
HAL_SITL: use baro atmospheric tables
2024-05-07 21:19:06 +10:00
Andrew Tridgell
67c506e75c
SITL: use new atmospheric tables
...
and improve pitot handling
2024-05-07 21:19:06 +10:00
Andrew Tridgell
db9cc9ac84
AP_DAL: use ahrs for EAS2TAS
...
this uses the stored value calculated once per loop
2024-05-07 21:19:06 +10:00
Andrew Tridgell
3d2037ef03
AP_Baro: log AltAMSL
...
useful as GPS comparison
2024-05-07 21:19:06 +10:00
Andrew Tridgell
f8ce6a8623
AP_Baro: added atmospheric tables for high altitude flight
...
this gets altitude and EAS2TAS much more accurately up to around 150k
feet AMSL. Enabled on boards using EKF double
2024-05-07 21:19:06 +10:00
Andrew Tridgell
128d9b0e41
AP_Airspeed: added atmospheric tables for high altitude flight
...
this gets altitude and EAS2TAS much more accurately up to around 150k
feet AMSL. Enabled on boards using EKF double
2024-05-07 21:19:06 +10:00
Andrew Tridgell
bae5859a92
AP_Scripting: added copter_loiter_brake script
...
for automatic BRAKE mode when flying in LOITER in steep terrain
2024-05-07 19:39:39 +10:00
Nick Exton
c9f4c47b42
AP_JSON: Ensure all printf() calls end with line break
2024-05-07 14:39:19 +10:00
Henry Wurzburg
061823551a
hwdef:preconfig MicoAir bds shipping with BF for BF migration
2024-05-07 14:14:06 +10:00
Henry Wurzburg
7a21f2b862
hwdef: enable can port on Blitz743Pro
2024-05-07 10:44:15 +10:00
Iampete1
a8b4999d96
AP_Scripting: tests: enforce correct types in docs
2024-05-07 09:51:53 +10:00
Iampete1
aa7a1ce2a6
AP_Scripting: Docs: fix all type errors
2024-05-07 09:51:53 +10:00
Iampete1
a4a8923e1e
AP_Scripting: generator: add return count to manual bindings
2024-05-07 09:51:53 +10:00
Iampete1
439fcb7c46
AP_Scripting: update docs
2024-05-07 09:51:53 +10:00
Iampete1
6e75f7c80f
AP_Scripting: update docs generator to show ap_objects as possibly nil
2024-05-07 09:51:53 +10:00
Peter Barker
7319422d6c
AP_HAL_Linux: remove unused RC input methods
...
these protocols have come from AP_RCProtocol for years
2024-05-07 09:49:48 +10:00
Iampete1
95a5169439
AP_Scripting: CAN: get_device
and get_device2
return nil if no driver is configure with the correct protocol
2024-05-07 09:48:10 +10:00
Iampete1
632d0a93c1
AP_CANManager: CANSensor: add getter for initialized
2024-05-07 09:48:10 +10:00