Commit Graph

33254 Commits

Author SHA1 Message Date
Randy Mackay
9d07580ae5 Copter: 3.6.3-rc1 release notes 2018-12-01 13:50:29 +09:00
ChristopherOlson
b242ec680e Copter:Parameters-TradHeli - set defaults for PSC and LOIT controllers 2018-12-01 13:44:26 +09:00
Andrew Tridgell
22ed074030 AP_OSD: fixed fonts for new font system 2018-11-29 15:35:50 +11:00
Andrew Tridgell
5e162cb0e1 HAL_ChibiOS: use ChibiOS IO firmware for Pixhawk4 2018-11-28 09:12:19 +11:00
Andrew Tridgell
792ac1a4b8 Tools: added ChibiOS IO firmware for Pixhawk4 2018-11-28 09:12:04 +11:00
Andrew Tridgell
352a7667a7 HAL_ChibiOS: allow ROMFS to override a file
this allows a hwdef.dat with an include to change an embedded file
specified in the include
2018-11-28 09:10:10 +11:00
Matt
d3edb53fcd AP_BattMonitor: Increase solo's power off button delay time
The Solo battery's power button needs to be held to power off. The
debounce time before it plays the power off tone is too low.
Occasionally it causes the user to not hold the button long enough.
This corrects the delay before playing the power off tone.
2018-11-24 11:13:25 +09:00
Randy Mackay
25f725362d Copter: version to 3.6.2 2018-11-24 08:45:58 +09:00
Randy Mackay
374ec39dad Copter: 3.6.2 release notes 2018-11-24 08:44:40 +09:00
Randy Mackay
97dd4b464d Copter: version to 3.6.2-rc4 2018-11-22 09:14:03 +09:00
Randy Mackay
acef1bdfb2 Copter: 3.6.2-rc4 release notes 2018-11-22 09:12:54 +09:00
Randy Mackay
9baff4ae4e Copter: winch disabled by default 2018-11-22 09:01:20 +09:00
Randy Mackay
c8b063a632 Copter: remove reset of alt target in manual throttle mode
the target was being set to zero only for logging purposes
2018-11-22 08:58:18 +09:00
Randy Mackay
af220a2118 AP_RangeFinder: benewake tfmini always provide cm distances
a misunderstanding of the datasheet led to the mistaken idea that while in short-range-mode the distances were returned in millimeters
2018-11-22 08:58:14 +09:00
Randy Mackay
0e61bbe657 Copter: version to 3.6.2-rc3 2018-11-19 12:00:18 +09:00
Randy Mackay
e01ba2e255 Copter: 3.6.2-rc3 release notes 2018-11-19 11:59:53 +09:00
Randy Mackay
ed3ed7270c RangeFinder: benewake buffer uses uint8_t 2018-11-19 11:46:28 +09:00
Andrew Tridgell
a1bb9eb6d0 waf: omit bootloader for px4-v2 build
This saves 8k of flash, and allows the plane stable release for older
Pixhawk1 boards to build
2018-11-19 11:40:11 +09:00
Andrew Tridgell
dbae45e868 AP_RCProtocol: fixed DSM parser for 8 channels
this ensures we remember channels from the previous frame, avoiding a
bug with more than 7 channels
2018-11-19 11:37:40 +09:00
Randy Mackay
f37cf57040 Copter: version to 3.6.2-rc2 2018-11-15 10:47:30 +09:00
Randy Mackay
9f5a34f409 Copter: 3.6.2-rc2 release notes 2018-11-15 10:46:56 +09:00
Andrew Tridgell
4f82f574e9 AP_RPM: set pin to input before attaching interrupt
this fixes input on AUX6 on CubeBlack
2018-11-15 12:38:22 +11:00
Randy Mackay
04c6cd106a Copter: version to 3.6.2-rc1 2018-11-15 09:59:44 +09:00
Randy Mackay
26a9a5e973 Copter: 3.6.2-rc1 release notes 2018-11-15 09:59:16 +09:00
Randy Mackay
4de971b879 AP_RangeFinder: fix benewake checksum check 2018-11-15 09:49:18 +09:00
Randy Mackay
8fdb67d955 DataFlash: log rangefinder status in RFND msg 2018-11-15 09:49:14 +09:00
Randy Mackay
54494a71e6 AP_RangeFinder: benewake returns at least 12m or 22m when out-of-range
value logged and shown to the user will be at least 12m for TFmini or 22m for TF02 which ensure the user won't see the range drop even if they have configured a very short useable distance
2018-11-15 09:49:11 +09:00
Randy Mackay
bb61b7e5e9 AP_RangeFinder: benewake logic reordering
this should be a non-functional change
2018-11-15 09:47:57 +09:00
Randy Mackay
54717c4f53 AP_RangeFinder: benewake lidar returns max range + 1m when out-of-range
also returns out-of-range when signal is weak
2018-11-15 09:47:30 +09:00
Peter Barker
7a0b9632cd Copter: make mavlink rangefinder health bit depend just on data available
This means the sensor is healthy even if it is out of range.

This is a partial revert of commit 724f34c7e7 (diff-577a72d2550199fabbdfd77fa5890368R408)
2018-11-15 09:44:08 +09:00
Randy Mackay
296132b876 Copter: version to 3.6.1 2018-11-10 10:06:31 +09:00
Randy Mackay
bf4c38333a Copter: 3.6.1 release notes 2018-11-10 10:06:06 +09:00
Randy Mackay
5575913b34 Copter: version to 3.6.1-rc1 2018-11-06 13:46:22 +09:00
Randy Mackay
e5066a16e0 Copter: 3.6.1-rc1 release notes 2018-11-06 13:46:02 +09:00
Michael du Breuil
9134b44c2b Copter: Remove old parameter conversion that conflicts with newer code 2018-11-06 12:34:04 +09:00
Michael du Breuil
547c9f0bf4 Copter: Fix battery failsafe param conversion 2018-11-06 12:33:48 +09:00
Randy Mackay
b579a36d8d AP_RangeFinder: Benewake driver discards distances over 327m 2018-11-06 12:32:11 +09:00
Peter Barker
46b035419e DataFlash: add sanity checks around EraseAll 2018-11-06 12:31:02 +09:00
Peter Barker
c0ad7d83f5 Copter: allow VFR_HUD.alt to be relative-alt if DEV_OPTIONS has bit 2 set 2018-11-06 12:19:28 +09:00
Peter Barker
85b46ea103 GCS_MAVLink: allow vehicles to override VFR_HUD.alt 2018-11-06 12:19:28 +09:00
Andrew Tridgell
d38f6c2824 Tools: added new bootloaders 2018-11-06 08:55:56 +11:00
Andrew Tridgell
0717dddc46 HAL_ChibiOS: bring copter stable up to date with hwdef.dat
this fixes GPIO numbering, fixes terrain on some boards and adds some
new boards
2018-11-05 19:36:40 +11:00
Andrew Tridgell
d8fd590a3f AP_IOMCU: fixed a race in event trigger on startup
this fixes the issue with initial safety option state, and with
initial safety mask
2018-11-05 17:26:28 +09:00
Andrew Tridgell
b55df3a8ee HAL_ChibiOS: ensure RC in channels are bounded 2018-11-05 17:24:19 +09:00
Andrew Tridgell
e4a4828203 HAL_ChibiOS: fixed LED mapping for fmuv4 2018-10-29 14:07:30 +11:00
Nghia Nguyen
f0a7df7cf9 AP_Rangefinder: Add support for Garmin LidarLite-V3HP 2018-10-27 11:18:00 +01:00
Randy Mackay
2eedcf5678 Copter: version to 3.6.0 2018-10-27 10:57:40 +09:00
Randy Mackay
57ea8c7b96 Copter: 3.6.0 release notes 2018-10-27 10:56:41 +09:00
Randy Mackay
9747a2ec47 Copter: flowhold descending bug fix 2018-10-27 10:54:47 +09:00
Randy Mackay
66ce71b55b Copter: fix flowhold logging format 2018-10-27 10:54:46 +09:00