Launch acceleration should be multiplied by vehicle mass when calculating launch force.
10 m/s (1g) is much too low for a hand launch. 25 m/s (2.5g) over a shorter period is more realistic and will trigger the recommended value of TKOFF_THR_MINACC of 15 recommended for hand launches.
Rework after review:
- Kept old IMU and barometer definition of crazyflie 2.0 in hwdef
- Added comment regarding soft-reset command
- Added defaults.parm for crazyflie
../../libraries/AP_NavEKF2/AP_NavEKF2_core.cpp: In member function ‘void NavEKF2_core::InitialiseVariables()’:
../../libraries/AP_NavEKF2/AP_NavEKF2_core.cpp:343:50: warning: ‘void* memset(void*, int, size_t)’ clearing an object of non-trivial type ‘struct NavEKF2_core::ext_nav_vel_elements’; use assignment or value-initialization instead [-Wclass-memaccess]
343 | memset(&extNavVelNew, 0, sizeof(extNavVelNew));
| ^
In file included from ../../libraries/AP_NavEKF2/AP_NavEKF2_core.cpp:4:
../../libraries/AP_NavEKF2/AP_NavEKF2_core.h:518:12: note: ‘struct NavEKF2_core::ext_nav_vel_elements’ declared here
518 | struct ext_nav_vel_elements {
| ^~~~~~~~~~~~~~~~~~~~
../../libraries/AP_NavEKF2/AP_NavEKF2_core.cpp:344:58: warning: ‘void* memset(void*, int, size_t)’ clearing an object of non-trivial type ‘struct NavEKF2_core::ext_nav_vel_elements’; use assignment or value-initialization instead [-Wclass-memaccess]
344 | memset(&extNavVelDelayed, 0, sizeof(extNavVelDelayed));
| ^
In file included from ../../libraries/AP_NavEKF2/AP_NavEKF2_core.cpp:4:
../../libraries/AP_NavEKF2/AP_NavEKF2_core.h:518:12: note: ‘struct NavEKF2_core::ext_nav_vel_elements’ declared here
518 | struct ext_nav_vel_elements {
| ^~~~~~~~~~~~~~~~~~~~
../../libraries/AP_NavEKF2/AP_NavEKF2_core.cpp: In member function ‘void NavEKF2_core::InitialiseVariables()’:
../../libraries/AP_NavEKF2/AP_NavEKF2_core.cpp:343:50: warning: ‘void* memset(void*, int, size_t)’ clearing an object of non-trivial type ‘struct NavEKF2_core::ext_nav_vel_elements’; use assignment or value-initialization instead [-Wclass-memaccess]
343 | memset(&extNavVelNew, 0, sizeof(extNavVelNew));
| ^
In file included from ../../libraries/AP_NavEKF2/AP_NavEKF2_core.cpp:4:
../../libraries/AP_NavEKF2/AP_NavEKF2_core.h:518:12: note: ‘struct NavEKF2_core::ext_nav_vel_elements’ declared here
518 | struct ext_nav_vel_elements {
| ^~~~~~~~~~~~~~~~~~~~
../../libraries/AP_NavEKF2/AP_NavEKF2_core.cpp:344:58: warning: ‘void* memset(void*, int, size_t)’ clearing an object of non-trivial type ‘struct NavEKF2_core::ext_nav_vel_elements’; use assignment or value-initialization instead [-Wclass-memaccess]
344 | memset(&extNavVelDelayed, 0, sizeof(extNavVelDelayed));
| ^
In file included from ../../libraries/AP_NavEKF2/AP_NavEKF2_core.cpp:4:
../../libraries/AP_NavEKF2/AP_NavEKF2_core.h:518:12: note: ‘struct NavEKF2_core::ext_nav_vel_elements’ declared here
518 | struct ext_nav_vel_elements {
| ^~~~~~~~~~~~~~~~~~~~
this allows for option to continue a mission after a landing is
complete. The default in copter was to continue, so adding this
option makes copter not continue by default. Plane already disarmed on
land complete.
when you have a moving baseline pair of ublox GPS modules and the
rover GPS does not have full fixed RTK lock on the base GPS then we
should not use it as our primary GPS as it's position and velocity can
be badly affected by the attempts of the GPS to gain a fixed lock.
This was observed in a flight with two F9P GPS, where the GPS velocity
data from the rover GPS went way off when it lost full RTK lock. It's
status stayed at 4, so it was selected as the primary GPS
Units are not associated with the CurrTot message. AP_BattMonitor.h indicates the total current consumed is reported in mAh. This change sets the units for CurrTot to Ampere seconds and applies a multiplier of 3.6 to convert the reported mAh value to Ampere seconds.
general scheduler delays could introduce small delays when writing SPort frames to the uart one byte
at the time potentially leading to rx desyncs on the SPort bus.
This fix replaces single byte writes with full frame writes.
The library has around 10ms to repond to polling so to guarantee frame integrity responses taking
longer than 7500us are discarded
This reverts the change from #13895 and instead resolves the issue by
increasing the scale factor limit to 1.4
There is an open question as to why some RM3100 compasses show a
different scale factor (by about 1.25 times) to other versions of the
same sensor. As we haven't resolved this properly it seems the correct
thing to do is follow the datasheet but allow for a wider range of
scale factors to cope with the variation between sensors
add filtered second and third harmonics and log them
make sure we use all of the gyro samples available on each axis rather than skipping
separate gyro update from fft start to minimize time in fast loop
add FFT_HMNC_PEAK to allow users to select which noise peak and which axis will be tracked.
make sure the self-test runs once and display the results
report self-test failure reason. make sure self-test runs for all windows.
always give logging a chance to run at IO_PRIORITY
add log message documentation
make sure the engine still runs even when the arming check has been disabled
record last FFT update time and cycle time and fallback to throttle estimate when update is too old
delay for longer in FFT thread between cycles to cope on F4
try really hard to get a viable frequency estimate
change range on MAXHZ/MINHZ to reflect that 50Hz is actually quite dangerous
swap the center peak for one of the shoulders if there is temporarily a closer match with the frequency trend
when FFT is disabled still log harmonic notch frequency
use distance matrix to find most appropriate peak
use a median filter to remove outliers before filtering
discount peaks that are relatively too low in energy
make sure harmonic fit is tracked for both potential targets
convert all gyro buffers to ObjectBuffer<float> for lock-free access
run all FFT steps inside the FFT thread
calculate cycle time and loop delay correctly
drop samples when the ring buffer is full
new dsp peak detection algorithm
add DSP sketch with frequency ascii art
tool to generate gyro data frames from batch sampled DF logs
add generated data from real Y6B flight
allow fft_start() to use ObjectBuffer<float> for lock-free access
allow ObjectBuffer to be resized
This limits the use of the reset to situations where it is a last ditch resort before a lane switch and failsafe.
This will limit false positives for general deployment, but still provide protection from fly-aways at the cost of some increase in reaction time.
This limits the use of the reset to situations where it is a last ditch resort before a lane switch and failsafe.
This will limit false positives for general deployment, but still provide protection from fly-aways at the cost of some increase in reaction time.
fetch item/s by their index, and review wp data, etc.
AP_Mission: ran mission files through approved astyle as they were non-compliant before this( astyle --options=Tools/CodeStyle/astylerc )
UAVCAN rangefinders add themselves to the frontend drivers as the
devices appear. If they turn up before RangeFinder::init() is run then
this prevented init() from scanning for the other rangefinders as
num_instances is non-zero
This also fixes a race condition in updating num_instances in the
UAVCAN backend
GCSs may request this very early on in the boot process, particularly
for SITL.
If we try to send it during a delay callback then we end up dropping it
at the moment - but we'd already sent the ack in response to the
request.
If anything in start_new_log did logging (for example, by sending a
statustext), we end up infinitely recursing.
With the patch:
diff --git a/libraries/AP_Logger/AP_Logger_File.cpp b/libraries/AP_Logger/AP_Logger_File.cpp
index 69b8ef0431..eb422d10f8 100644
--- a/libraries/AP_Logger/AP_Logger_File.cpp
+++ b/libraries/AP_Logger/AP_Logger_File.cpp
@@ -778,6 +778,7 @@ void AP_Logger_File::PrepForArming()
*/
void AP_Logger_File::start_new_log(void)
{
+ gcs().send_text(MAV_SEVERITY_WARNING, "Starting new log");
stop_logging();
start_new_log_reset_variables();
pbarker@bluebottle:~/rc/ardupilot(master)$
We see:
at ../../libraries/AP_Logger/AP_Logger_File.cpp:781
this=0x555555ad9d30, pBuffer=0x7fffff8209d0, size=75, is_critical=true)
at ../../libraries/AP_Logger/AP_Logger_Backend.cpp:372
this=0x555555ad9d30, pBuffer=0x7fffff8209d0, size=75)
at ../../libraries/AP_Logger/AP_Logger_Backend.h:32
this=0x555555ad9d30, message=0x7fffff820b10 "Starting new log")
at ../../libraries/AP_Logger/LogFile.cpp:466
this=0x555555a6d758 <copter+11384>,
message=0x7fffff820b10 "Starting new log")
at ../../libraries/AP_Logger/AP_Logger.cpp:752
this=0x555555a6e708 <copter+15400>, severity=MAV_SEVERITY_WARNING,
fmt=0x5555557d64d0 "Starting new log", arg_list=0x7fffff820be0,
dest_bitmask=1 '\001') at ../../libraries/GCS_MAVLink/GCS_Common.cpp:1847
this=0x555555a6e708 <copter+15400>, severity=MAV_SEVERITY_WARNING,
fmt=0x5555557d64d0 "Starting new log", arg_list=0x7fffff820be0)
at ../../libraries/GCS_MAVLink/GCS.cpp:53
this=0x555555a6e708 <copter+15400>, severity=MAV_SEVERITY_WARNING,
fmt=0x5555557d64d0 "Starting new log")
at ../../libraries/GCS_MAVLink/GCS.cpp:60
at ../../libraries/AP_Logger/AP_Logger_File.cpp:781
this=0x555555ad9d30, pBuffer=0x7fffff820dc0, size=75, is_critical=true)
at ../../libraries/AP_Logger/AP_Logger_Backend.cpp:372
I'm not aware of any instances in the code where this will actually
happen - but it could easily sneak in.
Saves 8 bytes per airspeed sensor (2 backends for 8 total), and removes
the unneeded width specifier, which has no impact on used memory, and
saves us 88 bytes of flash because we don't have to do work to shift the
bits around.
AP_Arming tacks on the sub-system bit.
Remove PiccoloCAN's silly nullptr check
Require the library to supply the failure message (no default message)
Remove default cases so authors know to think about places they should
add things.
AP_Arming tacks on the sub-system bit.
Remove PiccoloCAN's silly nullptr check
Require the library to supply the failure message (no default message)
Remove default cases so authors know to think about places they should
add things.
AP_Arming tacks on the sub-system bit.
Remove PiccoloCAN's silly nullptr check
Require the library to supply the failure message (no default message)
Remove default cases so authors know to think about places they should
add things.
AP_Arming tacks on the sub-system bit.
Remove PiccoloCAN's silly nullptr check
Require the library to supply the failure message (no default message)
Remove default cases so authors know to think about places they should
add things.
this fixes a problem where two different locations could both be
mapped to the same disk block in the terrain/*.DAT files. That meant
that pre-filled terrain on the microSD card would sometimes require a
download in flight. It also means that a RTL with loss of GCS could
sometimes fly through a region with no terrain data available
Other changes in this patch:
- allow for a 2cm discrepancy in the lat/lon of the grid
corners. This is needed to allow for slightly different floating
point rounding in tools that pre-generate terrain data to load on
the microSD
- added TERRAIN_OPTIONS parameter to allow the user to disable
attempts to download new terrain data. This is mostly useful for
testing to validate a terrain generator
chobitsfan
Randy Mackay
Sergey Bokhantsev
Peter Barker
Iampete1
Andrew Tridgell
Paul Riseborough
duccan
Siddharth Purohit
James Jacobsson
Alexander Maryanovsky
Phillip Kocmoud
Andras Schaffer
Tatsuya Yamaguchi
Samuel Tabor
TunaLobster
Henry Wurzburg
Michael du Breuil
mmk0102
Rishabh
Gone4Dirt
CUAVcaijie
MisterMower
vierfuffzig
yaapu
Peter Hall
Andy Piper
Buzz
Paul Riseborough
Mark Whitehorn
mhefny