Commit Graph

4063 Commits

Author SHA1 Message Date
Jason Short 9c19138fb8 Log.pde : Updated Flash Logging to log Floats properly vs scaled integers. 2012-04-21 15:25:53 -07:00
Jason Short e22832a832 Added a union for casting floats to ints and back when storing Floats to the DataFlash 2012-04-21 15:17:09 -07:00
rmackay9 090f5aaa6f ArduCopter - config.h - set standard RC_SPEED to 125 for helicopter frame 2012-04-21 23:46:36 +09:00
rmackay9 c993049c48 ArduCopter - combined CH6_DAMP and CH6_STABILIZE_KD tuning parameters to avoid confusion 2012-04-21 23:24:57 +09:00
rmackay9 11a384a7ff AP_Motors - allow tail servo to be reversed. Closes ArduCopter issue #228 2012-04-21 23:07:57 +09:00
Michael Oborne fd2409a730 APM Planner 1.1.73
fix udp and tcp connections
2012-04-21 21:37:12 +08:00
rmackay9 533772339e ArduCopter - Attitude.pde - added logging of optical flow pid controller 2012-04-21 20:17:12 +09:00
rmackay9 3e95ade004 ArduCopter - changed optflow object to be APM2 version if necessary 2012-04-21 20:15:55 +09:00
rmackay9 919f004b27 ArduCopter - changed Optical Flow for APM2 to use A3 pin 2012-04-21 20:15:16 +09:00
rmackay9 c45b124cbe DataFlash_APM2 - moved CS_inactive call (which disables the dataflash) from the beginning to the end of all methods. This means the dataflash does not monopolize the SPI bus.
Also formatting changes to use tab instead of space. Sorry, should have done this as a separate check-in to the above changes.
2012-04-21 20:14:45 +09:00
rmackay9 f18ee75b5c AP_OpticalFlow - updated test sketch to allow testing of APM2 version 2012-04-21 20:11:18 +09:00
rmackay9 3075a0c5bd AP_OpticalFlow - added support for optical flow for APM2 2012-04-21 20:10:35 +09:00
rmackay9 7bda35dc28 AP_OpticalFlow - moved most pin definitions into .cpp file 2012-04-21 20:09:15 +09:00
Michael Oborne 671989c14b APM Planner 1.1.72
fix turn radius length (100m)
modify 3dr radio options
modify heli Setup
2012-04-21 15:30:15 +08:00
Craig Elder 4ff0510fce Test: Initial Test commit
This is a test

Signed-off-by: Craig Elder <Craig@3DRobotics.com>
2012-04-20 18:11:57 -07:00
Michael Oborne 7d376a6dc7 fix y6 firmware 2012-04-21 08:29:40 +08:00
Michael Oborne d1a9eec74d firmware build 2012-04-21 08:04:59 +08:00
James Goppert 20cdc3a0ac MAVLink update to 1.0.7 2012-04-20 12:31:50 -04:00
rmackay9 f0a9209935 ArduCopter - regressed version back to 2.5.4 2012-04-20 21:58:32 +09:00
Andrew Tridgell 7f8fe97889 GPS: u-center config file for 3DR Ublox 2012-04-20 22:05:30 +10:00
Andrew Tridgell f170790fd8 GPS: fixed auto GPS test 2012-04-20 22:05:30 +10:00
Andrew Tridgell 711814085b GPS: detect new style 3DR UBlox 2012-04-20 22:05:30 +10:00
Andrew Tridgell 08bc7f1a41 GPS: fixed the UBlox test code 2012-04-20 20:57:08 +10:00
Michael Oborne 8d797fec3c fix potential null pointer 2012-04-20 17:57:06 +08:00
Andrew Tridgell 1478191ecf sitl: make it easy to run sitl for MAVLink 1.0 2012-04-20 10:09:21 +10:00
Andrew Tridgell 1cc7adbac0 sitl: allow sitl build with MAVLink 1.0 2012-04-20 10:09:21 +10:00
Michael Oborne 71206ea778 APM Planner 1.1.71
add arduplane level
more image georef options - now does gpx for dronemapper.
2012-04-20 08:05:33 +08:00
James Goppert 5390467f3d Worked on ArduCopter cmake options. 2012-04-19 16:05:08 -04:00
James Goppert ba89f39781 Updated MAVLink to 1.0.6 release. 2012-04-19 15:46:29 -04:00
Michael Oborne c5a77f2666 APM Planner 1.1.70
language by hazy
move turning circle to be based on cog
add APPROACH
add autodec on/off
mod 3dr radio uploader to read in 64 byte packets
add more georef caching. much faster now on more than 1 run.
2012-04-19 19:22:02 +08:00
James Goppert 6fae800dc2 Working on ArduPlane options. 2012-04-19 02:23:54 -04:00
James Goppert 53c143a575 Improved cmake options. 2012-04-18 23:15:29 -04:00
James Goppert 0f90164f03 Changed default cmake port for ArduPlane. 2012-04-18 21:31:46 -04:00
James Goppert 0e7e77760a Updated ArduPlane/ArduCopter cmake options. 2012-04-18 15:16:02 -04:00
Hazy 909c85cff2 APM Planner
add some Chinese translation
2012-04-18 19:05:36 +08:00
James Goppert 54d7f1ca21 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2012-04-17 23:09:56 -04:00
James Goppert a9f0bd24d7 Switched to project specific cmake lists.
This is better since each project has very different options.
2012-04-17 23:07:20 -04:00
James Goppert fb07cddd6f Making cmake local to projects. 2012-04-17 21:31:10 -04:00
Michael Oborne d577fb7338 APM Planner 1.1.69
add ability to geotag images from log file. - will release guide soon
2012-04-18 08:04:57 +08:00
James Goppert bce4410419 Working on cmake options. 2012-04-17 16:59:52 -04:00
Phil Cole 7a81bf2bd5 GIT_Success.txt: test edit
Following the instructions, using Tortoise.
2012-04-17 17:47:54 +10:00
James Goppert ab3ebe68e7 Modified default cmake port. 2012-04-16 20:53:06 -04:00
James Goppert c6f099c888 Updated cmake. Now works with ArduPlane/ ArduCopter. 2012-04-16 20:37:06 -04:00
Michael Oborne 4c31dcdaeb APM Planner 1.1.68
add turn radius - status
add new pink line to Arduplane - turn radius
2012-04-17 07:43:53 +08:00
Adam M Rivera b500d9430f AP_AHRS_HIL.h: Fixed HIL build by adding missing public property. 2012-04-16 10:26:14 -05:00
rmackay9 870b5e5f75 ArduCopter - CH6 Tuning - added AHRS_YAW_KP parameter as 30. Now you can easily set the amount that the mag is used to correct the gyro based yaw estimate in the DCM 2012-04-16 23:47:57 +09:00
Andrew Tridgell 95cb35c7bb AHRS: enable AHRS_ group in ArduCopter 2012-04-16 20:55:14 +10:00
Andrew Tridgell d07b77237e AHRS: enable AHRS_ group in ArduPlane 2012-04-16 20:55:13 +10:00
Andrew Tridgell 8e90aeea4e AHRS: added AHRS_YAW_P parameter
this allows users to change the yaw gain in DCM
2012-04-16 20:55:13 +10:00
Phil Cole 9e36b9b672 Git tool test
Rebased old branch (demo-branch) onto master in the clone to get the file
to appear and then added the text.
2012-04-16 18:00:00 +10:00