Andrew Tridgell
9c067f360f
AP_BattMonitor: added option to send resting voltage to GCS
2022-03-22 11:12:54 +11:00
Peter Barker
f1ec657c41
GCS_MAVLink: correct compilation with HAL_INS_ACCELCAL_ENABLED false
2022-03-22 10:39:44 +11:00
Peter Barker
fe863b9567
AP_Vehicle: correct compilation with HAL_INS_ACCELCAL_ENABLED false
2022-03-22 10:39:44 +11:00
Peter Barker
38a1c4412a
AP_Mount: correct compilation with HAL_INS_ACCELCAL_ENABLED false
2022-03-22 10:39:44 +11:00
Peter Barker
3dae386ae3
AP_InertialSensor: correct compilation with HAL_INS_ACCELCAL_ENABLED false
2022-03-22 10:39:44 +11:00
Peter Barker
df4911cbcb
AP_NavEKF3: avoid direct use of Location alt field
2022-03-22 10:33:37 +11:00
Peter Barker
83011580f3
AP_NavEKF2: avoid direct use of Location alt field
2022-03-22 10:33:37 +11:00
Andrew Tridgell
33b7f8f46e
Tools: rebuild IO firmware
2022-03-22 10:30:35 +11:00
Andrew Tridgell
ce0b7a8957
AP_IOMCU: fixed handling of RC_OPTIONS bit to ignore RC failsafe bit
...
this worked on FMU but not on IOMCU
2022-03-22 10:30:35 +11:00
Andrew Tridgell
522173328c
AP_RCProtocol: added failsafe_active() API
2022-03-22 10:30:35 +11:00
Andrew Tridgell
e8115a99bc
AP_Scripting: added set_override method for scripting
...
useful for test code
2022-03-22 10:21:06 +11:00
Willian Galvani
19db542111
AP_Param: Use AP:FS for accessing files
2022-03-22 10:19:21 +11:00
Willian Galvani
0e62d561d9
AP_Filesystem: add allow_absolute_paths to open(), implement it for posix backend
2022-03-22 10:19:21 +11:00
Peter Barker
2784f8fa7f
Plane: remove persistent guided_WP_loc state
...
So instead of updating plane.guided_WP_loc and then calling
set_guided_WP(void) to copy that state into plane.next_WP_loc we pass
the new location in the call to set_guided_WP(const Location &loc).
avoidance was the only place which was not entirely over-writing
plane.guided_WP_loc. However, plane.next_WP_loc was updated to be the
current location when we entered guided mode. If we update the
horizontal/vertical avoidance now it is relative to the current
location, not the guided wp location, which could be quite important.
2022-03-22 10:14:40 +11:00
Andrew Tridgell
feb9e78f00
AP_GPS: prevent switching to a dead GPS
...
when we switch away from the blended GPS instance we need to ensure we
don't switch to a GPS that is timing out, and may be the instance that
is triggering the disable of blending
2022-03-22 10:10:07 +11:00
Pierre Kancir
699651e306
Tools: add pexpect on Arch env
2022-03-22 09:08:06 +11:00
Pierre Kancir
e704e84bf9
Tools: fix package install on Python2
2022-03-22 09:08:06 +11:00
pacolate12
0d256da3b5
AP_UAVCAN: correct array inxexing
...
Allows the code to be run on hardware
2022-03-20 07:32:33 -07:00
bugobliterator
8574afb2e1
AP_BoardConfig: add WHOAMI for INV42688
2022-03-20 07:23:10 -07:00
bugobliterator
95b69ba1fd
AP_Bootloader: add board type CubeOrangePlus
2022-03-20 07:23:10 -07:00
bugobliterator
7abcf9ec46
AP_HAL_ChibiOS: add CubeOrangePlus
2022-03-20 07:23:10 -07:00
Peter Barker
1f5165349e
Plane: correct compilation when airspeed disabled
2022-03-20 21:47:05 +11:00
Peter Barker
6b48a8df02
Tools: correct antennatracker name in size_compare_branches.py
2022-03-20 21:46:45 +11:00
Andrew Tridgell
62db423758
Tools: update MatekL431 bootloaders
2022-03-19 12:06:04 +11:00
Andrew Tridgell
54e4c6e1be
hwdef: leave MatekL431 ROMFS uncompressed
...
this allows for bl update when low on memory
2022-03-19 12:06:04 +11:00
mateksys
b3f7556ac2
Tools: add MatekL431 bootloader
2022-03-19 12:06:04 +11:00
mateksys
35ed87a5db
AP_HAL_ChibiOS: add MatekL431 AP_Periph hwdef
2022-03-19 12:06:04 +11:00
Andrew Tridgell
994e1e0c0a
AP_Periph: mark version as 1.4.0dev
2022-03-18 21:16:13 +11:00
Andrew Tridgell
59456b4f82
AP_Periph: updated release notes for 1.3.0
2022-03-18 21:14:07 +11:00
Andrew Tridgell
116c692e2b
AP_Periph: rename ReleaseNotes.txt
...
be consistent with plane and copter
2022-03-18 21:14:04 +11:00
Andrew Tridgell
2c22cbc50e
Plane: update release notes for 4.2.0beta3
2022-03-18 21:13:54 +11:00
Henry Wurzburg
14700063d2
ArduPlane: convert floating point divides into multiplys
2022-03-18 15:26:44 +11:00
Henry Wurzburg
c48b7319bc
AP_RSSI: convert floating point divides into multiplys
2022-03-18 15:26:44 +11:00
Andrew Tridgell
6ebefbdb16
Plane: added airspeed based pitch limit check
...
prevent using too much pitch when at low airspeed, which can lead to
severe instability in SLT quadplanes
2022-03-18 13:36:16 +11:00
Andrew Tridgell
eabdaae1e7
Plane: use set_lean_angle_max_cd()
...
allows for a wider range of Q_TRANS_DECEL while landing on the desired
landing point
2022-03-18 13:36:16 +11:00
Andrew Tridgell
7bb129aa3e
AC_AttitudeControl: added set_lean_angle_max_cd()
2022-03-18 13:36:16 +11:00
Andrew Tridgell
7dcdeac7ab
AC_Autorotation: use accel_to_angle()
2022-03-18 13:36:16 +11:00
Andrew Tridgell
f824be726c
AC_WPNav: use angle/accel functions
2022-03-18 13:36:16 +11:00
Andrew Tridgell
ca4151be2c
AP_Math: added angle_to_accel() and accel_to_angle()
2022-03-18 13:36:16 +11:00
Andrew Tridgell
cc6fc2b130
Plane: improvements to POSITION1 controller
...
this improves 4 things in the POSITION1 controller based on logs from
4.2.0beta2. The changes are designed to increase the tolerance to
an incorrect value for Q_TRANS_DECEL, reducing landing overshoot
1) we fix the initialisation of the acceleration. The
init_xy_controller() function assumes zero accel, so we need to
call set_accel_desired_xy_cmss() just after that init to get the
correct accel. Thanks to Leonard for this fix
2) if we decel more than expected due to too low Q_TRANS_DECEL we
need to reduce the target speed, rather than putting the nose down
3) lower the default Q_P_JERK_XY to a value more appropriate for most
quadplanes (Leonard suggested a value of 2)
4) fixed the pitch envelope from Q_BACKTRANS_MS to start after the
airbrake phase is complete
2022-03-18 13:36:16 +11:00
Andrew Tridgell
3772029450
Plane: fixed pitch envelope after AIRBRAKE
...
we need to setup last_fw_mode_ms and last_fw_nav_pitch_cd when we
enter POSITION1 mode so that the expanding envelope pitch limit from
Q_BACKTRANS_MS is applied correctly
2022-03-18 13:36:16 +11:00
Andrew Tridgell
8b16b5ca94
Plane: adjust throttle mix for auto landing
...
use mix-max during landing approach and initial descent, use min in
land final. As discussed with Leonard
2022-03-18 13:35:46 +11:00
Andrew Tridgell
8e64d1cbd7
pymavlink: update submodule
2022-03-18 02:17:15 +00:00
Peter Barker
ebe2205ba7
SITL: add on-hardware example files
2022-03-17 14:39:55 +11:00
Peter Barker
fa2e841387
AP_HAL: honour HAL_SIM_GPS_ENABLED
2022-03-17 14:39:55 +11:00
Peter Barker
e0561b0ca1
GCS_MAVLink: split AP_HAL_SITL and HAL_SIM_ENABLED
2022-03-17 14:39:55 +11:00
Peter Barker
7ad9609fb7
AP_AHRS: split AP_HAL_SITL and HAL_SIM_ENABLED
2022-03-17 14:39:55 +11:00
Peter Barker
318678ac96
Rover: split AP_HAL_SITL and HAL_SIM_ENABLED
2022-03-17 14:39:55 +11:00
Peter Barker
a501a86c8d
Blimp: split AP_HAL_SITL and HAL_SIM_ENABLED
2022-03-17 14:39:55 +11:00
Peter Barker
07b299997d
ArduSub: split AP_HAL_SITL and HAL_SIM_ENABLED
2022-03-17 14:39:55 +11:00
