Mirror/ardupilot
5
0
Fork 0
mirror of https://github.com/ArduPilot/ardupilot synced 2025-01-09 01:18:29 -04:00
Code Issues Packages Projects Releases Wiki Activity
42,281 Commits 71 Branches 510 Tags 772 MiB
9bdb89474a
Commit Graph

354 Commits

Author SHA1 Message Date
Henry Wurzburg
3397bce235 Plane: Quadplane tailsit transition to FW throttle level change 2020-04-21 09:51:47 +10:00
Henry Wurzburg
6c730ccfec Plane: start tailsitter forward transition from current pitch angle 2020-04-21 09:50:57 +10:00
Rishabh
0c5d68dfeb Plane: Replace update_vel_controller_xy() with update_xy_controller() 2020-04-21 09:22:45 +10:00
Andrew Tridgell
156fe0846f Plane: fixed plane landing gear to obey LGR_OPTIONS bits 
we forced landing gear retract/deploy on takeoff and landing when we
should be following the options bits
 2020-04-15 17:10:31 +10:00
Michael du Breuil
37be15b3cd Plane: When stick mixing is disabled do not apply stick mixing to quadplane modes 2020-04-04 10:12:22 +11:00
Mark Whitehorn
cbce94005b Plane: expand description of QTUN.Sscl log message field 2020-04-03 08:36:55 +11:00
Andrew Tridgell
c6a6427d6a Plane: prevent lidar glitches from triggering land final 
this prevents short term lidar glitches from triggering the change
from descend to final in quadplane
 2020-02-27 13:15:46 +11:00
Randy Mackay
f2ab428cdd Plane: rename update_throttle_mix 
was called update_throttle_thr_mix
also minor format fixes
 2020-02-25 16:52:40 +09:00
Peter Barker
74dbcac40e ArduPlane: log disarm method 2020-02-22 12:16:29 +11:00
Andrew Tridgell
7a14992cce Plane: reset TECS at end of auto VTOL takeoff 2020-02-16 17:04:07 +11:00
Andrew Tridgell
0bfab20bd0 Plane: fixed a bug in LOITER_TURNS in quadplanes 
if NAV_LOITER_TURNS is used with Q_GUIDED_MODE=1 then we would orbit
forever. This ensures we do exit the loiter
 2020-02-12 13:52:32 +11:00
Peter Hall
a2e72de5ae Plane: move to airspeed_estimate with pointer 2020-01-14 22:34:37 -07:00
Gone4Dirt
760909d046 Plane: Prevent FS action overiding VTOL land 2019-12-31 11:42:59 +11:00
Mark Whitehorn
56b2c697d2 Plane: change tailsitter_input to bitmask 
update parameter metadata for Q_TAILSIT_INPUT and Q_FRAME_TYPE
 2019-12-18 08:33:29 +11:00
Mark Whitehorn
c16f3a2cba Plane: simplify body-frame roll axis swapping and constrain yaw rate max 2019-12-18 08:33:29 +11:00
Mark Whitehorn
14fc6c5446 Plane: add logging for tailsitter gainscaling and clean up tailsitter body-frame roll input handling 
fix metadata for tailsitter param GSCMSK
rework roll/yaw scaling for body-frame roll options
add constraints on body-frame roll and yaw inputs
move speed_scaler logging into QTUN message
 2019-12-18 08:33:29 +11:00
kd0aij
95da094bfe Plane: update tailsitter speedscaling logic 
add tailsitter gain scaling option mask and logging
tailsitter qassist bugfix; thanks, @iampete
apply roll limit in tailsitter bodyframe roll control
add define for future exclusion of tailsitter gainscaling debug code/logging
tailsitter bodyframe roll and qacro input scaling bugfixes:
  respect Q_TAILSIT_RLL_MX and roll/yaw scale parameters in bodyframe roll modes
  fix unintended swap of Q_ACRO_RLL/YAW_RATE params in QACRO mode
don't scale motor tilt

Co-authored-by: IamPete1 <33176108+IamPete1@users.noreply.github.com>
 2019-12-18 08:33:29 +11:00
Peter Barker
1fdb4b429f Plane: use https:// scheme for ardupilot URLs 2019-12-10 07:53:46 +11:00
Andrew Tridgell
36baaeb3a0 Plane: added option to run idle governor in MANUAL mode 
useful for quadplane testing
 2019-11-17 20:10:54 +11:00
Andrew Tridgell
e5bad28f1d Plane: added Q_ASSIST_ALT parameter 
this allows for quadplane assistance in fixed wing modes when the
aircraft drops below a given altitude. This could help save an
aircraft that is flying badly in fixed wing mode
 2019-11-09 20:17:36 +11:00
Andrew Tridgell
680a89671f Plane: fixed doc path for Q_AUTOTUNE 2019-11-01 09:31:40 +11:00
Leonard Hall
87b49c64f8 Plane: limit ATC_MOT_MIX_MAX in case of a fly away 2019-10-31 12:23:48 +08:00
Michael du Breuil
ee96ec7f0d Plane: Support new AP_Vehicle::set_mode 2019-10-25 08:48:22 +08:00
Randy Mackay
edb5f05339 Plane: minor comment changes 2019-10-22 07:15:48 +08:00
Mark Whitehorn
1a2abae902 Plane: reduce QTUN log rate to 25Hz 2019-10-20 06:24:46 +11:00
sas
9405fd6958 Plane: remove unused location argument to control_auto 2019-10-08 10:49:51 +11:00
Michael du Breuil
f9580424f6 Plane: Resore old default behaviour for throttle curves 
The change in this made QStabilize behave very differently then it had,
which is quite shocking in a test flight.
 2019-10-07 21:17:07 +11:00
Andrew Tridgell
db4ae9ff24 Plane: check airspeed and active Z controll for hover learning 2019-10-04 14:01:08 +10:00
Andrew Tridgell
5c43b18672 Plane: fixed height_above_ground() for case when rangefinder is below min 
this prevents a rangefinder that goes below min distance from causing
the calculations that depend on height above ground to fail
 2019-09-17 09:36:26 +10:00
Andrew Tridgell
34b0967d09 Plane: prevent fwd motor from spinning up on ground in quadplane landing 
if the rangefinder starts to measure below it's min range then the fwd
motor can spin up.

Thanks to Josh for reporting this!
 2019-09-17 09:36:26 +10:00
Andrew Tridgell
7751352a86 Plane: implement VTOL landing for AFS termination 
this allows for vertical landing as an AFS_TERM_ACTION
 2019-09-12 09:59:17 +10:00
Mark Whitehorn
788e7a840c Plane: default angle_boost to disabled for tailsitters 2019-09-12 09:05:42 +10:00
Michael du Breuil
4f22dff14d Plane: Add an airspeed limit for quadplane takeoffs 2019-09-09 22:06:25 -06:00
Michael du Breuil
77afcf6a1b Plane: Abort takeoffs that take to long to complete 2019-09-09 22:06:25 -06:00
Henry Wurzburg
7178655cbe Plane: fixed landing after VTOL loiters 2019-09-10 08:57:13 +10:00
Leonard Hall
34da437266 Plane: support for upgrade to PID object 2019-07-25 17:38:15 +09:00
Leonard Hall
157f786adf Global: rename desired to target in PID info 2019-07-25 17:38:15 +09:00
Michael du Breuil
22598b1a4b Plane: Reduce inerital nav dependence 2019-07-16 12:11:42 +09:00
Hwurzburg
44f6f7335e Plane: Added Quadplane option for QRTL failsafe action 2019-07-05 11:25:56 +10:00
IamPete1
76663d66e8 Plane: support bicopter tiltrotors 2019-07-02 10:15:17 +10:00
1iggy2
220176f283 Plane: added octa I frame 2019-06-04 09:49:44 +09:00
Peter Barker
400aa53654 Plane: move arming-related functionality into parent classes 
Logging moves up
arming via mavlink moves up
arming via switch moves up
 2019-05-30 07:37:30 +09:00
Mark Whitehorn
34a1cf9528 Plane: move callback setup to QuadPlane::setup() 2019-05-08 10:28:42 +10:00
Mark Whitehorn
aeaff72e14 Plane: fix acro stabilization check 2019-05-08 08:44:52 +10:00
Mark Whitehorn
4a7ce1b384 Plane: clean up qacro 2019-05-08 08:44:52 +10:00
Mark Whitehorn
dd50d435ab Plane: limit bodyframe roll mode to tailsitters 2019-04-30 08:51:24 +10:00
Mark Whitehorn
f054301ec2 Plane: add QACRO roll/pitch/yaw rate params 2019-04-23 09:46:38 +10:00
Mark Whitehorn
8bcf2439ad Plane: quadplane stabilize manual throttle midpoint and expo 
move throttle curve logic to AP_Math

use parameter THROTTLE_EXPO in get_pilot_throttle
 2019-04-23 09:46:38 +10:00
Mark Whitehorn
b515431008 AP_Math: add expo and throttle_curve functions 2019-04-23 09:46:38 +10:00
Pierre Kancir
65b4ba0539 ArduPlane: use past_interval_finish_line and line_path_proportion from Location 2019-04-23 09:20:43 +10:00