Randy Mackay
9b40ba98d7
GCS_MAVLink: regenerated messages
2013-07-14 15:52:55 +09:00
Randy Mackay
6bcbcc0382
GCS_MAVLink: add DO_SET_ROI to common.xml
2013-07-14 15:49:17 +09:00
Andrew Tridgell
d9f13b6b8c
GCS_MAVLink: merge in changes from upstream mavlink repo
2013-07-14 16:02:29 +10:00
Andrew Tridgell
b1202ccbff
GCS_MAVLink: merge in latest upstream XML changes
2013-07-14 15:41:25 +10:00
Andrew Tridgell
9d66adae13
AP_Airspeed: added get_airspeed_ratio() and set_airspeed_ratio()
...
This is to help Paul develop an automatic tuning system for airspeed
ratio
2013-07-13 21:53:38 +10:00
Andrew Tridgell
cc778a68ae
APM_Control: changed attitude controllers to take angular error not angle
...
this makes it easier for ACRO mode
2013-07-13 21:45:58 +10:00
Andrew Tridgell
b721bcc129
AP_AHRS: removed get_roll_rate_earth() and get_pitch_rate_earth()
...
these are not used any more
2013-07-13 21:45:58 +10:00
Andrew Tridgell
21859f9364
RC_Channel: fixed dead_zone for range channels
...
The dead_zone was being used inconsistently, used in PWM space in one
place, and in control output space in another.
The fix required us to move the index number of the RC channel eeprom
value for RCn_DZ, as users will have a throttle deadzone of 3 set in
their eeprom due to a bug that Randy just fixed that caused the value
to always be saved to eeprom. In plane we then need to fix the
deadzone for the throttle to be 30
this fixes issue #303
Thanks to Soren Kuula for spotting this!
2013-07-13 13:18:54 +10:00
Andrew Tridgell
086e8f80dc
AP_AHRS: fixed spin rate gain conversion from degrees to radians
...
fixes issue #433
Thanks Jurgen!
2013-07-13 12:36:25 +10:00
Randy Mackay
effc829790
INS: relax accel offset check to 3.5 m/s/s
...
One user, Dusty, has found that even with offsets of 3.1 m/s/s
successful alt hold and loiter are possible
2013-07-13 10:43:07 +09:00
Randy Mackay
110966c186
AP_TECS: compile error fix for size_of(log_tuning)
2013-07-12 11:45:02 +09:00
Randy Mackay
fb5ada38c0
RC: example sketch uses set_default_dead_zone
2013-07-12 11:44:58 +09:00
Randy Mackay
47437b9ddf
RC: set dead zone only if parameter has not been set by user
2013-07-12 11:44:16 +09:00
Randy Mackay
012d7b0c0a
OptFlow: initialisation fix
...
Thanks to DongFang (aka Soren) for finding the issue and the solution
2013-07-11 14:14:37 +09:00
Andrew Tridgell
131aa53e42
AP_Relay: update for new PX4 relay pin
2013-07-11 13:50:23 +10:00
Andrew Tridgell
83b13c3d88
HAL_PX4: fixed definition of relay and piezo pins
2013-07-11 13:50:23 +10:00
Andrew Tridgell
0916388ab5
HAL_PX4: retry opening UARTs up to 5 times
...
this seems to help a lot with the USB port on PX4
2013-07-11 13:50:23 +10:00
Marco Bauer
72d0721721
AP_Relay: setup pin for PX4 relay support
2013-07-11 13:50:22 +10:00
Marco Bauer
a3b216bce3
HAL_PX4: added GPIO driver
2013-07-11 13:50:22 +10:00
Randy Mackay
bf5a50f738
WPNav: stopping point projection uses wp_leash
2013-07-11 11:39:44 +09:00
Andrew Tridgell
f2316747f5
APM_Control: re-work to allow for rate based control
2013-07-11 09:10:41 +10:00
Randy Mackay
345924ddec
WPNav: replace LOITER_ACCEL_MAX with parameter
...
Also removed unused _lean_angle_max variable
2013-07-10 20:00:32 +09:00
Randy Mackay
204f613467
WPNav: bug fix to reported distance to target
...
This value is for reporting purposes only
2013-07-10 18:21:08 +09:00
Randy Mackay
518eba0729
WPNav: bug fix to loiter accel calculation
...
Contribution from Leonard Hall
2013-07-10 17:52:12 +09:00
Randy Mackay
c4f17b3235
WPNav: rounding error fix in loiter
...
Contributed by Leonard Hall
2013-07-10 16:24:37 +09:00
Randy Mackay
5d23d5aaa7
WPNav: reduce loiter speed used to correct pos error
...
Contributed by Leonard Hall
This should reduce the aggressiveness of the response when we experience
a GPS glitch
2013-07-10 15:52:18 +09:00
Randy Mackay
7860d06b91
AHRS: typo fix for ORIENTATION param description
2013-07-10 14:56:48 +09:00
Andrew Tridgell
0f72401d8d
AP_Baro: added GND_ALT_OFFSET parameter
...
used for automatic barometric adjustment by a ground station equipped
with a barometer
2013-07-10 14:38:57 +10:00
Andrew Tridgell
469736e6bc
DataFlash: changes for GPS field changes
2013-07-10 14:04:22 +10:00
Andrew Tridgell
279f6d00f0
AP_AHRS: changes for GPS field changes
2013-07-10 14:04:22 +10:00
Andrew Tridgell
7dbb898264
AP_GPS: switch fields to add units suffix
...
altitude -> altitude_cm
ground_speed -> ground_speed_cm
ground_course -> ground_course_cd
this helps prevent unit mixups
2013-07-10 14:04:22 +10:00
Paul Riseborough
66d60953df
TECS: added height update_pitch call
2013-07-10 14:04:22 +10:00
Andrew Tridgell
9959f6b2df
AP_Camera: removed incorrect mavlink sends
...
these sends did nothing, as MAVLINK_COMM_3 is not connected to
anything. If it was connected they would be dangerous, as a blocking
serial write could cause the stabilization of a copter not to run. If
the serial port was non-blocking it would corrupt the packet.
If we needed something like this it would have to use the MAVLink
packet queueing logic we use elsewhere
2013-07-10 11:51:40 +10:00
Craig@3DR
f5154d9e7a
AP_Camera: changed update_location() to return true for camera trigger
...
Makes the main vehicle code responsible for taking a photo so logging can occur
2013-07-10 08:39:56 +10:00
Andrew Tridgell
7fa1fe8590
AP_Param: use 0xFFFF not __UINT16_MAX__
...
MacOS doesn't have __UINT16_MAX__
2013-07-09 20:51:06 +10:00
Paul Riseborough
2c5db9a165
TECS: added support for throttle nudging
2013-07-09 20:50:37 +10:00
Paul Riseborough
9c431b4a04
TECS: use altitude supplied by mainline code
...
this allows for use of ALT_OFFSET and ALT_MIX
2013-07-09 09:25:53 +10:00
Paul Riseborough
d8fedf994a
AP_SpdHgtControl: added height above field parameter
2013-07-09 09:05:22 +10:00
Tobias
4a75351bd3
AP_Param: fixed a compiler warning with -Wsign-conversion
2013-07-08 14:57:33 +10:00
Tobias
27a5c28851
AP_Param: fixed some compiler warnings
...
* added comment
* replaced "~0" with the appropriate macro
* resolved -Wconversion
* saved some space by modifying AP_Param::add_vector_suffix (writing
behind buffer could happen, if buffer_size is almost uint16_max but this
can surely be ignored)
further reading:
http://stackoverflow.com/questions/809227/is-it-safe-to-use-1-to-set-all-bits-to-true
2013-07-08 14:57:33 +10:00
Tobias
ab311d1dd4
AP_Compass: removed comparison out of range compiler warning
...
uint_ >= 0 (-Wtype-limits)
2013-07-08 14:57:25 +10:00
Tobias
c95072ea25
AP_GPS: added explicit cast to omit [-Wconversion] warning
2013-07-08 14:53:20 +10:00
Andrew Tridgell
8c49ed78a5
AP_Math: make the rotation numbers easier to find
2013-07-08 12:17:59 +10:00
Andrew Tridgell
a6c7bd3612
AP_Compass: fixed rotations for COMPASS_ORIENT
...
this matches AHRS_ORIENTATION again
2013-07-08 12:17:59 +10:00
Tobias
338c054da2
Filter: validity of array index was checked AFTER accessing the element.
...
(correction decreased Program size by 12 bytes)
2013-07-08 12:17:59 +10:00
Tobias
d3ea88e8c7
AP_HAL: resolved -Woverloaded-virtual warning
...
the function:
virtual size_t AP_HAL::Print::write(const uint8_t *buffer, size_t size);
was hidden in all derived classes by their
virtual size_t write(uint8_t) = 0; implementations.
To solve this, a non-virtual write(const uint8_t *, size_t) that calls a
virtual write_implementation was added.
This isn't necessary atm, because the derived classes don't call
write(const uint8_t *, size_t), BUT this decreases the apm2-quad Program
size by 40 bytes :D and removes warnings.
2013-07-08 12:17:34 +10:00
tobias
1bf135b36f
AP_AHRS: make some more functions const
2013-07-08 12:07:50 +10:00
Tobias
ce6529734c
HAL_AVR: reorder parameters to remove a warning with -Wreorder
2013-07-08 12:07:50 +10:00
tobias
4e7fea787b
HAL_AVR: corrected includes to replace #include "$HEADER" with #inlcude "utility/$HEADER"
...
adding -I for EVERY DIRECTORY isn't desirable
http://gcc.gnu.org/onlinedocs/cpp/Search-Path.html
2013-07-08 12:07:50 +10:00
Randy Mackay
649cbf6b68
WPNav: reduce default WP_ACCEL and LOITER_SPEED
2013-07-07 16:00:13 -10:00
