Andrew Tridgell
514be604a5
GPS: added auto-configuration of UBlox GPS
...
the Ublox will now auto-configure for 5Hz with just the messages we
want. It also supports setting the navigation engine type
2012-06-10 16:34:13 +10:00
Andrew Tridgell
9c1ce9e1c5
FastSerial: avoid buffer re-allocation on re-open if possible
...
we commonly re-open serial ports a lot in the AUTO GPS driver
2012-06-09 07:43:22 +10:00
rmackay9
aeaebb21d5
ArduCopter: updated firmware version to 2.6 Delta ahead of the next round of testing (and hopefully soon a release)
2012-06-08 21:54:09 +09:00
Andrew Tridgell
99b39aef93
APM: ready for 2.40-beta
2012-06-08 18:03:21 +10:00
Andrew Tridgell
cf4e56457b
SITL: map() is a C++ function, so needs to be in C++ part of the header
...
this fixes the ACM build
2012-06-08 17:09:23 +10:00
Andrew Tridgell
cbf477addd
GPS: added debug code to the main GPS class
2012-06-08 16:42:03 +10:00
Andrew Tridgell
a8bfc5d8e9
GPS: re-open the serial port with a 256 byte serial receive buffer
...
this ensures all GPS parsers have a 256 byte buffer available
2012-06-08 16:42:03 +10:00
Andrew Tridgell
a684bddbda
GPS: open the GPS serial port with a 256 byte buffer
...
the UBLOX needs more than 128 bytes for reliable parsing
2012-06-08 16:42:03 +10:00
Andrew Tridgell
296e651b30
GPS: fixed the UBLOX parser to handle unknown messages
...
the parser was broken in several ways:
1) when it received an unknown message it didn't update the ck_a and ck_b fields, so it
thought the message had a bad checksum, which meant it got out of protocol sync
2) the read() method would return false if the last message from the GPS was of an unknown type.
So we relied on the last msg always being one that we understand and want
3) the parser considered any valid UBLOX message to be 'new data', whereas we only actually get
a new fix when we get box a new position and velned message
4) the total message size per update is more than 128 bytes, but the serial port was opened
with only a 128 byte buffer, so we got corruption regularly
2012-06-08 16:42:02 +10:00
Andrew Tridgell
9c2ba2e814
GPS: tidy up the auto gps test
2012-06-08 16:42:02 +10:00
Robert Lefebvre
238a1ced2c
TradHeli adding ramp up time to Ch8 Throttle Pass-through.
2012-06-07 22:55:47 -04:00
Robert Lefebvre
c5916a8b4d
Opening up the Yaw Rate constraint for Trad Heli.
2012-06-07 22:40:25 -04:00
Robert Lefebvre
e2496181ff
Yaw Fix
...
Modified Nav_Yaw controller to better track intended heading changes.
2012-06-07 17:15:33 -04:00
Jason Short
a9610a0761
Stabilization patches
...
removed Angle error limit for stabilization
constricted Iterm to +- 5° error and limited the implementation to when the quad is +- 5° from center
doubled the output limit for Rate controller.
increased default Rate_P gain to .18 with matching Rate_D of .004
Tested in the SIM and in backyard. dramatically increases performance and quad no longer overshoots and flips when pushed hard.
2012-06-05 16:41:44 -07:00
rmackay9
70b04d9427
ArduCopter: updated firmware description to 2.6 Gamma
2012-06-05 21:28:13 +09:00
Andrew Tridgell
8b258e23e7
ACM: prevent link flood with "Low Battery" warnings
...
thanks to Marco for noticing this
2012-06-05 11:31:40 +10:00
Andrew Tridgell
ff9743995d
autotest: fixed lat/lon update for multicopter sim
...
this makes waypoint tracking more accurate
2012-06-05 11:18:52 +10:00
John Arne Birkeland
f4a4982328
ArduPPM V2.2.68 - Fixed possible logic flaw in throttle failsafe reset if _JITTER_FILTER_ is enabled
2012-06-04 22:55:15 +02:00
Robert Lefebvre
df17ff3bc1
AP_MotorsHeli Syntax correction.
2012-06-04 15:53:07 -04:00
Michael Oborne
297f391548
APM Planner 1.1.92
...
add dump -1 option to log dump
fix terminal issue with logs
fix mavlink 1.0 manual/stablaize Mode
fix config screen showing incorrect tab
2012-06-04 17:57:48 +08:00
Andrew Tridgell
25c17a5425
re-enable the AP_Mount build
2012-06-04 19:32:11 +10:00
Michael Oborne
14be88dd55
AC: add hilstate message
2012-06-04 16:24:08 +08:00
Andrew Tridgell
47d5f31fc2
removed copy of pymavlink code
...
use upstream code instead
2012-06-04 17:51:12 +10:00
Andrew Tridgell
7589de689b
mavlink: added auto-detection of mavlink protocol version
2012-06-04 17:51:12 +10:00
Jason Short
71f80f3a77
Bug fix: When adjusting altitude, RTL then land will fail unless this var is reset to false.
2012-06-03 22:25:27 -07:00
Jason Short
1b9f75c844
Updates to Flip:
...
Ability to abort flip mode if things go wrong
init function to re-enter flip mode if aborted
2012-06-03 22:15:19 -07:00
Andrew Tridgell
70669434a2
autotest: wait for VFR_HUD to be non-zero on startup
2012-06-04 14:55:40 +10:00
Andrew Tridgell
0f0cbce22f
GPS: fixed a race condition in the ublox driver
...
the status update comes as a separate message from the lat/lon
2012-06-04 14:47:58 +10:00
Andrew Tridgell
012fc35314
mavlink: fixed build with uart resend
2012-06-04 13:45:55 +10:00
Andrew Tridgell
b6467cb1fa
MAVLink: updates to mavlink headers to fix mavlink 1.0 issues
2012-06-04 13:34:07 +10:00
Andrew Tridgell
7c63d2c17b
ACM: MAVLINK10 uses HIL_STATE
...
thanks to Michael for noticing this
2012-06-04 13:31:07 +10:00
Andrew Tridgell
076d1616ba
autotest: default to mavlink10
2012-06-04 13:19:21 +10:00
Andrew Tridgell
e7cf643386
added mavlink09 targets
...
allows easier building with mavlink0.9
2012-06-04 13:14:52 +10:00
Andrew Tridgell
d1fe093921
autotest: fixed build_all.sh for MAVLink 1.0
2012-06-04 13:14:52 +10:00
Andrew Tridgell
d8919731ee
Mavlink: fixed library build for MAVLink 1.0
2012-06-04 13:14:52 +10:00
Andrew Tridgell
ec1abbf987
SITL: fixed SITL build with mavlink10
2012-06-04 13:14:52 +10:00
Andrew Tridgell
3f4e87cccc
ACM: fixed HIL build for MAVLINK10
2012-06-04 13:14:52 +10:00
Andrew Tridgell
3af29bd84e
AP_Mount: disable AP_Mount until it works with MAVLINK10
2012-06-04 13:14:51 +10:00
Andrew Tridgell
60f8d09506
mavlink10: fixed MAV_VAR -> MAVLINK_TYPE
2012-06-04 13:14:51 +10:00
Andrew Tridgell
bccfb08c55
MAVLink: updated to latest upstream mavlink
...
this includes no significant changes
2012-06-04 13:14:51 +10:00
Michael Oborne
9303a89573
fix AC hil build
2012-06-04 11:12:52 +08:00
Michael Oborne
a71ed6c5ce
enable mavlink10 by default
2012-06-04 08:02:08 +08:00
Jason Short
15aea320cb
Added note to remove this unused param
2012-06-03 11:13:50 -07:00
Jason Short
12ab875d58
using current PWM rather than a re-read of the PWM.
2012-06-03 11:13:50 -07:00
Jason Short
9ab06c5542
Moved PID logging counter into define
2012-06-03 11:13:50 -07:00
Jason Short
73e23aab2a
GPS time set to unsigned int32
2012-06-03 11:13:50 -07:00
rmackay9
72d76558a7
ArduCopter: Ensure update_GPS does nothing when gps is disabled.
...
This fixes a bug in which an APM without a GPS would not work because it would constantly scan for a valid GPS long after it should have given up and moved on.
2012-06-03 23:48:45 +09:00
rmackay9
5c9dc00ae2
AP_Baro: fixed comment to clarify that every-other call updates temperature or pressure
2012-06-03 17:31:17 +09:00
rmackay9
fd6b21d0c7
ArduCopter: updated firmware version to 2.6Beta in preparation for beginning of testing
2012-06-03 17:02:35 +09:00
rmackay9
4544b37fec
ArduCopter: updated firmware version to 2.6Beta in preparation for beginning of testing
2012-06-03 16:59:23 +09:00