Peter Barker
|
9a2ca025dd
|
Tracker: move sending of sys_status message up
|
2019-02-05 11:07:39 +11:00 |
Peter Barker
|
b48cb1e367
|
Plane: move sending of sys_status message up
|
2019-02-05 11:07:39 +11:00 |
Peter Barker
|
7197cf9e5c
|
Copter: move sending of sys_status message up
|
2019-02-05 11:07:39 +11:00 |
Peter Barker
|
7ea223eac6
|
Rover: move sending of sys_status message up
|
2019-02-05 11:07:39 +11:00 |
Peter Barker
|
120f0822ae
|
GCS_MAVLink: move sending of sys_status message up
|
2019-02-05 11:07:39 +11:00 |
Michael du Breuil
|
df1632054e
|
Plane: Update throttle mix
|
2019-02-05 11:05:54 +11:00 |
Peter Barker
|
2bd34aaebe
|
Tools: autotest: disable quadplane test as it passes when it shouldn't
|
2019-02-04 21:18:21 +11:00 |
Peter Barker
|
d9d9745c11
|
Tools: autotest: add test for QuadPlane QAutoTune
|
2019-02-04 21:18:21 +11:00 |
Peter Barker
|
19d8ffb4e4
|
AP_Proximity: stop passing through old fence contains_return_point parameter
|
2019-02-04 16:52:42 +09:00 |
Peter Barker
|
5448cfda80
|
AC_Fence: remove always-true contains_return_point parameter
|
2019-02-04 16:52:42 +09:00 |
Randy Mackay
|
a72477590f
|
AP_RangeFinder: format fixes
|
2019-02-04 11:32:13 +09:00 |
Dmitri Ranfft
|
221c4ca3cc
|
AP_Proximity: Removed the 3 bit limitation for the enumeration
|
2019-02-04 11:08:54 +09:00 |
Dmitri Ranfft
|
4e8f3a7a3a
|
Autotest: renamed requested RangeFinder parameters to account for the new changes.
|
2019-02-04 11:08:52 +09:00 |
Dmitri Ranfft
|
f8af5afc53
|
RangeFinder: Removed the 3 bit limitation for the enumeration
|
2019-02-04 11:08:50 +09:00 |
Dmitri Ranfft
|
5eff01a86f
|
RangeFinder: allow up to 10 range finders to be used at once
|
2019-02-04 11:08:47 +09:00 |
Peter Barker
|
1fcd7fac06
|
Tools: autotest: add test for flip mode
|
2019-02-04 11:07:28 +09:00 |
Peter Barker
|
f4f40f749b
|
Copter: Flip: fix FIXME by moving state into mode class
|
2019-02-04 11:07:28 +09:00 |
Peter Barker
|
3071372c8d
|
AP_Logger: add Sub-specific events
|
2019-02-04 09:30:07 +09:00 |
Peter Barker
|
1690f78f4c
|
Sub: move handling Write_Event into AP_Logger
|
2019-02-04 09:30:07 +09:00 |
Peter Barker
|
3521d98b52
|
Copter: move handling Write_Event into AP_Logger
|
2019-02-04 09:30:07 +09:00 |
Peter Barker
|
78e76b84b2
|
AP_Logger: move handling Write_Event into AP_Logger
|
2019-02-04 09:30:07 +09:00 |
Andrew Tridgell
|
bb76143095
|
HAL_ChibiOS: fixed mini-pix uart order
|
2019-02-04 08:21:58 +11:00 |
Peter Barker
|
e23313e16b
|
Tools: autotest: ensure RC input is at defaults before each test
|
2019-02-04 08:00:07 +11:00 |
Peter Barker
|
fa37ad344b
|
Tools: autotest: refactor setting of rc defaults
|
2019-02-04 08:00:07 +11:00 |
Tom Pittenger
|
9b540a6380
|
AP_Logger: log health failure probability
|
2019-02-03 08:25:46 -08:00 |
Tom Pittenger
|
74299906b1
|
AP_Airspeed: log health failure probability
|
2019-02-03 08:25:46 -08:00 |
ChrisBird
|
c9af223579
|
AP_Airspeed: Renaming the check method name and readding the overall option check. This will set it up for future options.
|
2019-02-03 08:25:46 -08:00 |
Tom Pittenger
|
1a04a540f5
|
AP_Airspeed: convert the defines into static consts
- also perform logging at end of update
- convert Options Mask into an enum
|
2019-02-03 08:25:46 -08:00 |
ChrisBird
|
d77906cb06
|
AP_Airspeed: This adds the ability to turn off and on the airspeed sensor if faulty.
|
2019-02-03 08:25:46 -08:00 |
ChrisBird
|
532431c284
|
AP_AHRS: Added get_max_wind to make it available for use in determining if the airspeed sensor is faulty.
|
2019-02-03 08:25:46 -08:00 |
Andrew Tridgell
|
5dbf603450
|
Plane: separate out slew limit logic for left/right throttles
|
2019-02-03 05:06:37 -08:00 |
Andrew Tridgell
|
28cf9d2f24
|
Plane: allow rudder at zero throttle
if rudder disarming is disabled
|
2019-02-03 05:02:07 -08:00 |
Andrew Tridgell
|
700519d805
|
AP_Compass: raise default max compass offsets
the larger offset doesn't present any problems for the compass
drivers, and helps on planes with magnetic hatches
|
2019-02-03 04:57:25 -08:00 |
Randy Mackay
|
ba7b354326
|
Copter: 3.6.6-rc1 release notes
|
2019-02-02 14:30:13 +09:00 |
Andrew Tridgell
|
42fda12b45
|
Tools: added help for -l option to sim_vehicle.py
|
2019-02-02 14:50:05 +11:00 |
Michael du Breuil
|
c3e11fd34d
|
AP_Scripting: Reduce stack allocated buffer size to reduce warnings
about large frame size
|
2019-02-01 14:31:05 -07:00 |
Michael du Breuil
|
b45970fded
|
AP_Scripting: Add location and ahrs user data
|
2019-02-01 14:31:05 -07:00 |
Michael du Breuil
|
9dd36ba511
|
AP_Scripting: Factor out common range constraints
|
2019-02-01 14:31:05 -07:00 |
Randy Mackay
|
6cebd634cd
|
Rover: avoid divide-by-zero in desired-speed-final calcs
The previous check using is_zero would not catch divide-by-zero cases in which the turn angle was very small but not quite zero
|
2019-02-01 06:10:42 -08:00 |
Peter Barker
|
2834fd8017
|
Tools: autotest: add test for channel override cancel
|
2019-02-01 11:48:01 +11:00 |
Tom Pittenger
|
2646e37e2c
|
AP_RPM: set health false if disabled during runtime
|
2019-02-01 09:20:30 +09:00 |
Andrew Tridgell
|
6048c10a7c
|
AP_InertialSensor: added driver for BMI088
setup for 1600 Hz accel sample, 2kHz gyro sample, 24g accel range
|
2019-01-31 12:05:57 -08:00 |
Peter Barker
|
44ff21479d
|
Tools: autotest: add a test for RTL speed
|
2019-01-31 19:34:32 +09:00 |
Randy Mackay
|
aa7743e991
|
Sub: integrate AC_WPNav::get_speed rename to get_default_speed
|
2019-01-31 19:34:32 +09:00 |
Randy Mackay
|
4d5e13f1d4
|
Plane: : integrate AC_WPNav::get_speed rename to get_default_speed
|
2019-01-31 19:34:32 +09:00 |
Randy Mackay
|
42c7f5ceb4
|
Copter: integrate WPNAV::set_speed_z split to set_speed_up and set_speed_down
|
2019-01-31 19:34:32 +09:00 |
Randy Mackay
|
717fb4d823
|
Copter: integrate AC_WPNav::get_speed rename to get_default_speed
|
2019-01-31 19:34:32 +09:00 |
Randy Mackay
|
cde2964f05
|
AC_WPNav: split set_speed_z into up and down
Also rely on AC_PosControl to store current target up and down speeds so wpnav's defaults are not affected by do-change-speed requests
|
2019-01-31 19:34:32 +09:00 |
Randy Mackay
|
b0811c86e7
|
AC_WPNav: rename get_speed_xy to get_default_speed_xy
This hopefully clarifies that the default speed is returned and not the current speed
|
2019-01-31 19:34:32 +09:00 |
Randy Mackay
|
e93dee89b7
|
AC_WPNav: rely on AC_PosControl to hold current target speed
|
2019-01-31 19:34:32 +09:00 |