Andy Piper
bb270014e7
AP_HAL_ChibiOS: make sure LEDs get a DMA channel on MatekH743-bdshot
2021-03-17 18:28:01 +11:00
Andy Piper
968d05a637
AP_HAL_ChibiOS: allow further LED channels to be allocated at the same length
2021-03-17 18:24:11 +11:00
Andrew Tridgell
8a8db85b9c
HAL_ChibiOS: fixed build of f103-trigger fw
2021-03-16 18:28:58 +11:00
Lava Chemist
4a52f945db
AP_HAL_ChibiOS: Add FlywooF745
2021-03-16 11:27:23 +11:00
Andy Piper
d6575fb6ad
AP_HAL_ChibiOS: bdshot configs for CubeYellow and mRoControlZeroH7
2021-03-03 18:02:26 +11:00
Andrew Tridgell
4fbdb59398
HAL_ChibiOS: prevent sharing the same DMA stream on TIMn_UP channels
...
this avoids an issue with DShot where we run the same DMA stream on
two timers at once
2021-03-02 11:58:38 +11:00
Andy Piper
6cb263056d
AP_HAL_ChibiOS: build fix for iomcu
2021-03-02 11:58:38 +11:00
Andy Piper
d0e4d510cf
AP_HAL_ChibiOS: order PWM timers by DMA UP stream id to prevent deadlocks in dshot
2021-03-02 11:58:38 +11:00
Andrew Tridgell
14791c335b
HAL_ChibiOS: fixed build of f3 boards without PWM out
2021-02-24 18:25:02 +11:00
Andrew Tridgell
243cf2199d
HAL_ChibiOS: disable shared DMA on IOMCU
...
this saves about 600 bytes of ram
2021-02-24 18:21:08 +11:00
Andrew Tridgell
c23f61b79a
HAL_ChibiOS: set internal error on panic
2021-02-24 18:18:37 +11:00
Andrew Tridgell
eec05c1f48
HAL_ChibiOS: fixed a race and null ptr deref in dshot
...
if a dshot is cancelled then the waiter can be nullptr
2021-02-24 15:39:10 +11:00
Andy Piper
b102391163
AP_HAL_ChibiOS: don't send rcout events without rcout thread
2021-02-24 08:55:12 +11:00
Mirko Denecke
edc2b0c94e
AP_HAL_ChibiOS: fix copy and paste typo
2021-02-23 08:15:50 +09:00
Andrew Tridgell
7af20e9ea3
HAL_ChibiOS: increase H7 serial buffer sizes
...
this takes better advantage of the new UART code. Log download over
USB gets to 730 kbyte/s. For comparison, with the 4.0 code on the same
H7 we get about 300 kbyte/s
2021-02-20 20:49:45 +11:00
Andrew Tridgell
3b88a3273b
HAL_ChibiOS: adjust up uart tx stack size
...
lowest was showing 80 bytes free, which is too close to the 64 byte
level where we trigger an internal error
2021-02-20 14:37:11 +11:00
Andrew Tridgell
5e0f175223
HAL_ChibiOS: adjust UART buffer sizes for new UART code
...
this gains about 20k of RAM, and has almost no impact on log download
speed at 921600 on a F427. The improved threading means we can afford
to have smaller buffers
2021-02-20 14:37:11 +11:00
Andy Piper
4e61ba2dc8
AP_HAL_ChibiOS: reduce stack sizes for rcout, uart_rx and storage.
2021-02-20 14:37:11 +11:00
Andy Piper
94de238751
AP_HAL_ChibiOS: disable RCOUT thread on iomcu and rebuild iomcu.
2021-02-20 14:37:11 +11:00
Andy Piper
f9c5f9be00
AP_HAL_ChibiOS: make dshot DMA unlock event driven in order to allow unlocking from rcout thread
...
refactor rcout into separate thread and process all dshot requests there
move uart DMA completion to event model
process dshot locks in strick reverse order when unlocking
convert Shared_DMA to use mutexes
move UART transmit to a thread-per-uart
do blocking UART DMA transactions
do blocking dshot DMA transactions
trim stack sizes
cancel dma transactions on dshot when timeout occurs
support contention stats on blocking locking
move thread supression into chibios_hwdef.py
invalidate DMA bounce buffer correctly
separate UART initialisation into two halves
cleanup UART transaction timeouts
add @SYS/uarts.txt
move half-duplex handling to TX thread
correct thread statistics after use of ExpandingString
set unbuffered TX thread priority owner + 1
correctly unlock serial_led_send()
don't share IMU RX on KakuteF7Mini
observe dshot pulse time more accurately.
set TRBUFF bit for UART DMA transfers
deal with UART DMA timeouts correctly
don't deadlock on reverse ordered DMA locks
change PORT_INT_REQUIRED_STACK to 128
2021-02-20 14:37:11 +11:00
mateksys
7eb4e9b370
AP_Periph: set PORT defaults for F405-MatekGPS
2021-02-18 11:51:50 +11:00
mateksys
97c2b7228e
AP_Periph: Matek F303 and F405 AP_Periph use DSP310 baro
2021-02-18 11:51:50 +11:00
Andy Piper
4c2cbdab8d
AP_HAL_ChibiOS: only setup half-duplex for receive when transmit is fully over
2021-02-17 20:09:48 +11:00
Andy Piper
5c32007cdf
AP_HAL_ChibiOS: ensure stop bits can be set before UART begin
2021-02-17 20:09:48 +11:00
Andy Piper
3a9107245c
AP_HAL_ChibiOS: allocate DMA and LED buffers correctly when the length changes
...
calculate DMAR pulse times correctly
ensure 50us pulse separation for LED
make sure the LEDs are signalled for output
only allow LED length to be set once
2021-02-17 18:36:36 +11:00
Michael du Breuil
c0da87c066
AP_HAL_ChibiOS: Update HitecMosaic to reflect changes to GPS config
2021-02-15 16:31:45 -07:00
Andrew Tridgell
9de1519928
HAL_ChibiOS: prevent hw flow control from hogging a DMA channel
...
When hw flow control is enabled check the CTS pin before we grab the
DMA channel to prevent a long timeout trying to send to a blocked port
from holding a DMA channel against another device
this fixes issue #16587
2021-02-15 07:23:56 +11:00
Andrew Tridgell
0cc4409845
HAL_ChibiOS: fixed handling of invalid channel for LED write
...
this prevents a null ptr dereference when an invalid channel (such as
one on IOMCU) is used for LEDs
2021-02-13 15:11:10 +11:00
Andrew Tridgell
098a17fe2e
HAL_ChibiOS: fixed CubeOrange ADSB param name
2021-02-13 13:06:20 +11:00
Andy Piper
20d8696a0a
AP_HAL_ChibiOS: BeastH7 has DPS310 baro
2021-02-10 18:33:59 +11:00
Andrew Tridgell
814393c9c2
HAL_ChibiOS: switch from DPS280 to DPS310 in boards that use the DPS310
2021-02-09 11:37:07 +11:00
Andrew Tridgell
86fda93781
HAL_ChibiOS: added heater correction of AK09916
...
this fixes a problem with the internal compass being impacted by the
magnetic field from the heater
2021-02-09 11:32:19 +11:00
Andrew Tridgell
2ab8ad0ef0
HAL_ChibiOS: added Durandal pinout details
2021-02-09 07:14:02 +11:00
Michael du Breuil
623951a262
AP_HAL_ChibiOS: Add some extra GPS SBF config
2021-02-05 11:52:29 -07:00
Tom Pittenger
d1e6b0befb
AP_HAL_ChibiOS: Add ADC1 support to STM32F3
...
This is useful for AP_Periph battery monitoring
2021-02-04 16:30:38 -08:00
Andrew Tridgell
b8e82a56f3
HAL_ChibiOS: don't start rout ticks till after full system init
...
this prevents an occasional boot hang on systems with DShot
enabled. We shouldn't be starting DShot output till after setup() is
complete as the outputs are still being configured
2021-02-05 07:17:57 +11:00
Andy Piper
2cdc202d19
AP_HAL_ChibiOS: use non-cachable SRAM3 for DMA on H743
...
Adjust SRAM1+SRAM2 to 256k as describe in the H743 reference manual
Provide access to mem_info() information
Co-authored-by: Andrew Tridgell <andrew@tridgell.net>
2021-02-03 23:35:44 +11:00
Andy Piper
06a1500f98
AP_HAL_ChibiOS: ensure GPIO pins get undef'ed properly
...
minimise bi-directional dshot configs for:
CubeOrange
Durandal
MatekF405
MatekH743
OmnibusNanoV6
Pixracer
mRoPixracerPro
omnibusf4pro
CUAV-X7
2021-02-03 18:49:06 +11:00
Michel Pastor
41f7587637
ChibiOS: Add SWD pins to SuccexF4 bootloader
2021-02-03 18:37:46 +11:00
auturgy
24268cc6de
AP_HAL_ChibiOS: add MatekH743-periph hwdef
2021-02-03 18:17:44 +11:00
mateksys
b91c65b4a4
AP_HAL_ChibiOS: add f405-MatekGPS & MatekF405-CAN hwdef
2021-02-03 18:09:35 +11:00
huhen
9ba35580db
HAL_ChibiOS: Init kakutef7 motor pins for correct initialization of some ESCs
2021-02-03 13:13:32 +11:00
Andy Piper
6f5d5c2bf9
AAP_HAL_ChibiOS: allow asserts to be printed on a GPIO pin
2021-01-27 19:36:58 +11:00
Andy Piper
d41c92d317
AP_HAL_ChibiOS: don't overwrite fault handler data, register forced faults
2021-01-27 19:13:18 +11:00
Andy Piper
20d928a86a
AP_HAL_ChibiOS: don't share DMA on OmnibusNanoV6 for Flash SPI
2021-01-27 19:04:49 +11:00
Andy Piper
873d35acd9
AP_HAL_ChibiOS: bi-directional dshot for MatekH743
2021-01-27 18:58:38 +11:00
Andy Piper
877dde4736
AP_HAL_ChibiOS: on BeastF7 share TIM3 UP/CH and give flash SPI dedicated channel
2021-01-27 18:54:43 +11:00
Andy Piper
9249b73e8b
AP_HAL_ChibiOS: correctly allow mixing of bidir and non-bidir channels
2021-01-27 18:49:15 +11:00
Andy Piper
2823fa7245
AP_HAL_ChibiOS: never write bytes that have not been erased on H7
...
Be more careful about flash failure conditions on H7
2021-01-27 18:30:36 +11:00
Andy Piper
78735a946e
AP_HAL_ChibiOS: allow STM32_FLASH_DISABLE_ISR for H7
2021-01-27 18:30:36 +11:00
