Commit Graph

448 Commits

Author SHA1 Message Date
Andrew Tridgell 3bdc7d41be INS: disable INS AP_Param table when not on APM1 hardware
this could cause overwriting of memory with default values
2012-08-11 22:06:03 +10:00
Andrew Tridgell c31eef59ae Mavlink: log wind estimation result 2012-08-11 22:06:03 +10:00
Andrew Tridgell d9b09d2c93 APM: allow for navigation by dead-reckoning
we now ask AHRS if we have a position estimate, and use that if
available
2012-08-11 12:01:08 +10:00
Andrew Tridgell 9fea3e3ac1 APM: pass airspeed sensor to AHRS 2012-08-11 08:57:44 +10:00
Andrew Tridgell 0ffc89d512 APM: support the MISSION_WRITE_PARTIAL_LIST command
this allows missions to be partially updated in flight
2012-08-09 17:13:36 +10:00
Andrew Tridgell dc47074dbd MAVLink: removed the need for Mavlink_compat.h
we have now fully transitioned to MAVLink 1.0, so we no longer need
the compatibility layer and the old names in the code
2012-08-09 12:22:46 +10:00
Andrew Tridgell 2a7b298bbc MAVLink: moved mavlink variables back to library
these were moved to the main sketches to allow for compile time
selection of MAVLink 0.9 vs 1.0. We no longer support 0.9, so we can
move it back, which simplifies some test sketches
2012-08-09 12:06:21 +10:00
Andrew Tridgell 5498d347f3 APM: Added RST_MISSION_CH option
this allows a pilot to reset the mission using a transmitter
switch. Very useful for repeating a mission during testing
2012-08-09 10:33:16 +10:00
Andrew Tridgell e2c8ec2c9e APM: removed THROTTLE_REVERSE option
Better to use RC3_REV
2012-08-09 10:04:44 +10:00
Andrew Tridgell e133900c68 APM: Added STICK_MIXING option
this replaces the compile time option. Disabling during long distance
flights when the transmitter may be out of range is useful.
2012-08-09 08:53:29 +10:00
Amilcar Lucas d34549f386 Add an optional second mount to ArduPlane and ArduCopter 2012-08-08 23:22:24 +02:00
Andrew Tridgell dc99586981 APM: removed pointless load() call 2012-08-08 16:51:23 +10:00
Andrew Tridgell dcc50b5705 AP_Airspeed: removed values passed to constructor 2012-08-08 16:38:39 +10:00
Andrew Tridgell 2114acddf1 APM: fixed default flap speed
the default of 255 translates to -1 as a AP_Int8, so use zero to mean
no flaps
2012-08-08 13:04:21 +10:00
Andrew Tridgell 5bfd1200d6 APM: change variables to use _cm, _cd and _ms suffix for units
this makes it less likely that we mix up units
2012-08-08 12:12:30 +10:00
Andrew Tridgell a823c9ceae APM: removed cli slider and dipswitch options
use mavlink/eeprom for all config
2012-08-08 12:12:29 +10:00
Andrew Tridgell 12cd6b68ff AP_Param: update ArduPlane core for new AP_Param interface 2012-08-08 12:11:57 +10:00
Jonathan Challinger 7815e3d810 APM: fixed rounding of altitude
the cast was rounding to the nearest meter
2012-08-08 12:07:35 +10:00
Amilcar Lucas f14237126a Add me :) 2012-08-06 00:40:12 +02:00
Amilcar Lucas b8c7b8a786 RC_Channel: Allow each channel to know who they are, this simplifies the enabling and output function calls. 2012-08-05 23:08:31 +02:00
Amilcar Lucas 9c1ac2d9e6 More work on ch9, 10 and 11 2012-08-04 19:44:41 +02:00
Amilcar Lucas 95f2af6d2d Implement set ROI 2012-08-04 18:44:29 +02:00
Amilcar Lucas 4ba847c449 The mount type must be updated periodically 2012-08-04 18:44:08 +02:00
Amilcar Lucas bbc4bdb729 More flexible RC support 2012-08-04 18:39:20 +02:00
Amilcar Lucas 50b5d33745 Enable camera triggering by default 2012-08-04 16:32:47 +02:00
Amilcar Lucas 82b82283be ATmega1280 does not have enough memory for mount support so disable AUTO GPS support, to allow mount support to fit.
This should almost have no side effects, because the most users use MTK anyways.
If the user defined a GPS protocol, than we will NOT overwrite it
2012-08-04 16:32:20 +02:00
Andrew Tridgell 301ab00c5b APM: added control switch debouncer
this adds a switch debouncer, similar to the one used in
ArduCopter. I'm adding this after a flight on the weekend where noise
on the control mode channel caused a mode change away from auto.

To prevent this change adding excessive mode switch latency, it also
moves the reading of the control switch to the 10Hz loop, away from
the 3.3Hz loop. That gives us 0.2s delay in mode switch changes and
allows for spikes in the control mode for 0.1 seconds without changing
mode.
2012-08-01 13:59:37 +10:00
rmackay9 176e6fdd68 ArduPlane: bug fix to global var_info parameter list for ahrs object. 2012-08-01 10:52:34 +09:00
Andrew Tridgell 0b49ac0ed0 APM: fixed overflow in geofence code for altitudes above 327 meters 2012-07-31 15:46:47 +10:00
Andrew Tridgell cb61c3be96 APM: fixed case of 'LAND_PITCH_CD'
mavlink parameters are uppercase by convention
2012-07-29 17:07:38 +10:00
rmackay9 06e35820e5 ArduPlane: allow MPU6000's DMP to be used for attitude estimation.
Enable by adding this line to APM_Config.h:
#define DMP_ENABLED ENABLED
2012-07-28 19:50:40 +09:00
rmackay9 842ce47219 ArduPlane: change to Parameters.pde to support moving var_info from AP_AHRS to AP_AHRS_DCM 2012-07-28 14:31:01 +09:00
Michael Oborne cb0eacca37 AP Fix Hil Airspeed calc in m/s 2012-07-26 20:21:17 +08:00
Andrew Tridgell 9eb05a2e1a APM: update version for 2.50 release 2012-07-26 11:36:17 +10:00
Andrew Tridgell 6bcfe913f7 APM: added a SCALING_SPEED parameter
this allows users to adjust the base speed used for scaling roll/pitch
PIDs. This can be used to make PIDs work for both airspeed and
non-airspeed control
2012-07-26 11:30:23 +10:00
Andrew Tridgell 3c2fc72654 APM: fixed HIL build 2012-07-26 10:09:07 +10:00
Andrew Tridgell 07992bc943 APM: fixed build
the SET_ROI commands are not supported yet
2012-07-26 10:03:36 +10:00
Andrew Tridgell 7e697e4abd APM: switch back to old nav_roll calculation
the old nav_roll will be used for the 2.50 release to prevent the need
for re-tuning. For the release after that we will use the new
calculation
2012-07-26 10:03:36 +10:00
Michael Oborne 39ad8b5eec AP fix sitl hil attitude mode. 2012-07-24 07:18:25 +08:00
Andrew Tridgell 9e72d4c3f4 APM: fixed a problem with wayoints completing early
when a user forces a waypoint jump, we may need to reset prev_WP to
prevent us thinking the waypoint is complete before we have started
2012-07-21 20:32:07 +10:00
Andrew Tridgell 85465c9126 MAVLink: fixed another two places where micros() was used for a millisecond time 2012-07-20 11:57:15 +10:00
Jason Short 98237a0e00 Added Oilpan INS group object param 2012-07-18 23:07:50 -07:00
Jason Short e574f3c8cf Arduplane: Fixed unsigned int comparison warning 2012-07-18 23:07:34 -07:00
Jeff Taylor d02655ac56 APM: Fixed bug where landing_pitch wasnt initialized properly
this adds a new LAND_PITCH_CD parameter to control the landing pitch
when an airspeed sensor is not being used
2012-07-19 13:59:30 +10:00
Andrew Tridgell d6e370886f APM: rename airspeed_cruise to airspeed_cruise_cm to make the units clearer
it is in cm/s, not m/s
2012-07-19 11:50:41 +10:00
Andrew Tridgell 1cf5057c61 APM: Use g.airspeed_cruise for turn rate calculation if the airspeed sensor is disabled.
This gives our best approximation for auto flight
2012-07-19 11:50:41 +10:00
Jonathan Challinger c7da63509b APM: Removed unused YAW_DAMPENER code.
YAW_DAMPENER was defined as zero
2012-07-19 11:50:21 +10:00
Jonathan Challinger d9d055ef78 APM: Removed incorrect nav_gain_scaler from nav_roll calculation.
nav_gain_scaler was originally added due to a perceived improvement in
loiter performance, but is incorrect for navigation. Turn rate is a
function of airspeed and bank angle, ground speed has no effect on
that.
2012-07-19 11:50:06 +10:00
Amilcar Lucas 3d385c0fb4 ArduPlane parameters: re-order the files, looks like the second file gets ignored :( 2012-07-18 22:52:17 +02:00
Amilcar Lucas 8a8e11fa7f ArduPlane parameters: Add base class info as well 2012-07-18 22:39:49 +02:00