Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
61,727 Commits 71 Branches 508 Tags 713 MiB
Commit Graph

25 Commits

Author SHA1 Message Date
Andrew Tridgell 94edcc4654 ArduPlane: change TRIM_ARSPD_CM to AIRSPEED_CRUISE 2024-01-23 15:00:30 +11:00
Mykhailo Kuznietsov b7c040e8bc ArduPlane: Fix some typos 
Fixed some typos found in the code.
 2023-10-12 18:30:42 +11:00
Paul Riseborough 98220c7315 Plane: Handle reset of q_fwd_throttle in QuadPlane::mode_enter(void) 2023-09-27 11:43:45 +10:00
Paul Riseborough 2d3431a1ac Plane: Improve use of forward flight motors and tilting rotors in Q modes 2023-09-27 11:43:45 +10:00
Andy Piper 761c7a0161 ArduPlane: fix incorrect float conversion 2023-07-18 11:06:02 +10:00
Iampete1 0d6d16d4e4 Plane: Quadplane: move modes fully to run function 2023-05-23 09:52:55 +10:00
Peter Barker 98e2782851 Plane: correct compilation when AP_Rally disabled 2023-04-10 16:37:42 -07:00
Iampete1 a63a32d6f3 Plane: QRTL: combine threshold radius for QRTL and RTL 2023-01-31 10:57:21 +11:00
Iampete1 928a923f43 Plane: Quadaplane: QRTL use stopping point for climb submode altitude threshold 2023-01-25 19:34:53 +11:00
Iampete1 bf9d49b72d Plane: Quadaplane: add param for min QRTL altitude when close to home 2023-01-25 19:34:53 +11:00
Iampete1 4a2a792624 Plane: QRTL: use cone for QRTL climb close to home 2023-01-25 19:34:53 +11:00
Iampete1 a99748a13d Plane: Quadaplane: use land_at_climb_rate_cm only when landing 2022-12-30 20:25:58 +09:00
Iampete1 f28d7a3574 Plane: move adjust_altitude_target functianlity to per mode functions 2022-12-20 10:37:06 +11:00
Iampete1 712611c50e Plane: Quadplane: add yaw command model 2022-07-13 18:26:36 +10:00
Iampete1 0cd1f605f6 Plane: Quadplane: always reset to QPOS_NONE on mode entry 2022-06-23 08:37:00 +10:00
Iampete1 d251c51ca1 Plane: Quadplane: QRTL climb to QRTL alt first if in Q mode 2022-06-21 09:11:08 +10:00
Andrew Tridgell 86c2404654 Plane: increased safety of guided -> auto quadplane takeoff 
when we arm in guided mode then enter a special guided_wait_takeoff
state. We keep motors suppressed until one of the following happens

  1) disarm
  2) guided takeoff command
  3) change to AUTO with a takeoff waypoint as first nav waypoint
  4) change to another mode

while in this state we don't go to throttle unlimited, and will refuse
a change to AUTO mode if the first waypoint is not a takeoff. If we
try to switch to RTL then we will instead use QLAND

This state is needed to cope with the takeoff sequence used by QGC on
common controllers such as the MX16, which do this on a "takeoff"
swipe:

  - changes mode to GUIDED
  - arms
  - changes mode to AUTO
 2022-05-18 06:43:16 +10:00
Andrew Tridgell 336b666f83 Plane: fixed stick mixing and throttle nudge in QRTL approach 
thanks to Henry for noticing this
 2021-12-28 16:04:12 +11:00
Iampete1 b9d240460b Plane: remove SpdHgt and use TECS direct 2021-11-13 08:05:39 +11:00
Andrew Tridgell 2be23fff2b Plane: obey Q_RTL_ALT when in POS1 and POS2 states 
this fixes the alt target for when user has disabled the quadplane
approach code
 2021-10-02 12:46:59 +10:00
Peter Barker 3d34e061fe ArduPlane: add and use HAL_QUADPLANE_ENABLED 2021-09-14 11:23:18 +10:00
Iampete1 63be15e018 Plane: mode_qrtl: combine enter and init 2021-09-08 18:06:58 +10:00
Iampete1 44e63861ce Plane: QRTL: move functions to ModeQRTL 2021-08-17 11:46:49 +10:00
Andrew Tridgell 3bb840f794 Plane: implement slow descent in QRTL approach 
this approaches in QRTL at ALT_HOLD_RTL alt, then descends to
Q_RTL_ALT close to the destination
 2021-06-05 13:05:30 +10:00
Tom Pittenger 0270c57530 Plane: massive refactor and creation of Mode class 2019-04-02 16:28:52 +11:00