Randy Mackay
e0ef57fdb5
Copter: add PILOT_TKOFF_ALT_DEFAULT definition
...
No functional change
2015-05-01 12:56:35 +09:00
David Dewey
0545185218
Copter: RTL at no less than 2m above home alt
2015-04-28 17:19:56 +09:00
Robert Lefebvre
1aa696bc10
Copter: Implement Stop Mode
2015-04-26 16:11:47 +09:00
Jonathan Challinger
9a025024b5
Copter: use LowPassFilterVector3f for land detector accel filter
2015-04-17 10:46:56 +09:00
Jonathan Challinger
eafbd94d51
Copter: run land detector at 400hz
2015-04-17 10:46:53 +09:00
Leonard Hall
2bf8f21b7a
Copter: roll, pitch rate IMAX to 2000
2015-04-09 20:19:56 +09:00
Randy Mackay
e1900f646f
Copter: remove PREARM_MAX_VELOCITY definition
2015-03-30 18:08:34 -07:00
Randy Mackay
74b98b89d0
Copter: remove dcm check
2015-03-27 00:04:37 -07:00
Andrew Tridgell
a4be1fede8
Copter: run all boards at 400Hz
...
SITL and Linux can now run at 400Hz
2015-03-22 18:57:43 -07:00
Randy Mackay
522ef8f91f
Copter: rename MOT df msg to MOTB
...
This will slightly reduce confusion with the MOT message from AC3.1.5
that eventually became RCOUT
2015-03-18 21:25:45 +09:00
Randy Mackay
b679fd0be0
Copter: log RATE with ATT
2015-03-18 21:25:42 +09:00
Randy Mackay
20311c3ba2
Copter: remove CH7_OPTION definition
...
We can replace the unused definitions and just set the aux switch
defaults to do-nothing directly in the parameter table
2015-03-17 21:18:50 +09:00
Robert Lefebvre
97cd3614eb
Copter: Change Aux Switch function list to enum.
2015-03-17 21:18:46 +09:00
Robert Lefebvre
a5af151a91
Copter: Initial expansion of Aux Switch to Ch7-12
2015-03-17 21:18:41 +09:00
Randy Mackay
b10730f35c
Copter: remove THR_MAX parameter
2015-03-16 14:49:34 +09:00
Víctor Mayoral Vilches
79e152cd93
Copter: Update compass to the new interface
2015-03-13 18:46:16 +11:00
Randy Mackay
088a49abbf
Copter: remove APM1, APM2 support
2015-03-13 16:41:03 +09:00
Randy Mackay
fbfc94cf69
Copter: remove GPS glitch and failsafe
...
The EKF failsafe now captures all failures that could lead to a bad
position including GPS glitches and a bad compass meaning we do not need
this protection in the main flight code.
2015-03-13 16:40:46 +09:00
Leonard Hall
778edfda72
Copter: default yaw rate filter to 5hz
2015-03-06 16:08:32 +09:00
Leonard Hall
d5bbe6de03
Copter: remove TRIM_THROTTLE
...
throttle_trim is replaced by throttle_average which is initialised to
the throttle_mid parameter value at startup
2015-03-06 14:02:19 +09:00
Leonard Hall
c78480e14f
Copter: rename loiter_pos to pos_xy
...
Also renamed throttle_rate to vel_z, throttle_accel to accel_z
2015-03-06 14:02:17 +09:00
Leonard Hall
e232867661
Copter: move LOITER_RATE to 2-axis PI controller
...
Also rename LOITER_RATE to VEL_XY for parameters, definitions, variables
2015-03-06 14:02:15 +09:00
Leonard Hall
2b0fb45fe8
Copter: integrate PID input filter
2015-03-06 14:02:11 +09:00
Leonard Hall
8ba195a3a2
Copter: add Mot and Rate dataflash logging
2015-03-06 14:02:07 +09:00
Randy Mackay
e081b9d1c7
Copter: home is set becomes three state
2015-02-12 15:00:50 +09:00
Randy Mackay
3aac281c5a
Copter: land detector requires desired climb rate be < -20cm/s
2015-01-31 17:23:43 +09:00
Randy Mackay
34503de18e
Copter: integrate SerialManager
...
Remove serial0, serial1 baud and protocol parameters
Pass serial_manager to GCS, GPS, mount, FrSky_telem objects during init
call SerialManager init_console on startup
use SerialManager's set_block_writes_all
2015-01-29 14:05:14 +11:00
Randy Mackay
18f8ffab6f
Copter: remove land detector bar climb rate definition
2015-01-28 10:59:15 +09:00
Randy Mackay
0065b3b224
Copter: tighten accel and gyro pre-arm consistency check
...
Accel diff threshold to 0.7m/s/s (was 1.0 m/s/s)
Gyro diff threshold to 5deg/sec (was 20deg/sec)
2015-01-20 12:44:02 +09:00
Andrew Tridgell
ab62105afe
Copter: use common send_opticalflow()
2015-01-03 15:53:49 +11:00
Andrew Tridgell
c784ee717b
Copter: update for new OptFlow API
2015-01-03 14:16:33 +11:00
Randy Mackay
2e7435df52
Copter: remove unused OF_LOITER pid defines
2014-12-31 13:16:18 +09:00
Randy Mackay
f2b0fc3566
Copter: disarm on landing regardless of pilot input
2014-12-27 13:33:06 +09:00
Randy Mackay
b6bcf841e1
Copter: remove second camera mount
2014-12-16 21:26:20 +09:00
Randy Mackay
fd55a2d9c4
Copter: increase GPS_HDOP_GOOD default to 2.3
2014-12-15 10:45:50 +09:00
Randy Mackay
3127dd94c1
Copter: add OPTFLOW to default logging
2014-12-08 14:58:27 +09:00
priseborough
267ef48026
Copter : disable tilt correction of range finder data for use by EKF
...
This is a temporary fix. We need to make separate range and altitude measurements available.
2014-12-06 18:16:45 +11:00
Andrew Tridgell
4c0351a76a
Copter: convert to new AP_InertialSensor API
2014-10-24 12:10:38 +11:00
Randy Mackay
f6ff1742d5
Copter: landing detector checks baro climb rate
...
Barometer climb rate must be -150cm/s ~ +150cm/s
This threshold is generous because we already use the inertial
navigation climb rate so this is just to catch cases where inertial nav
is very incorrect in it's climbrate estimates
2014-10-22 17:29:14 +09:00
Jonathan Challinger
5fc02bdbc4
Copter: Reduce prearm alt disparity check back to 1m
2014-10-20 10:55:59 +09:00
Randy Mackay
27b73fa209
Copter: enable Optflow by default for Pixhawk only
2014-10-16 21:17:54 +09:00
Randy Mackay
b0e6931ab0
Copter: add DCM_CHECK_THRESH parameter
2014-10-16 17:22:11 +09:00
Randy Mackay
4e06970a1c
Copter: disable OptFlow in SITL
2014-10-15 20:46:06 +09:00
Randy Mackay
67b7b2d667
Copter: enable optflow by default for Pixhawk
2014-10-15 16:36:31 +09:00
Randy Mackay
8997c224e2
Copter: enable Guided velocity controller for Pixhawk
2014-10-13 21:40:20 +09:00
Randy Mackay
2f3f1a1d5e
Copter: Rate Pitch IMAX default to 1000
...
Spotted by Jonathan Challinger, thanks!
2014-10-07 21:06:43 +09:00
Jonathan Challinger
73e1719ee1
Copter: print frame type in log headers
2014-09-27 16:11:21 +09:00
Randy Mackay
193bc5331a
Copter: cleanup enabling of cli and frsky telem for APM
2014-09-20 14:41:26 +09:00
Randy Mackay
d8d1b38a52
Copter: increase Alt Disparity check to 2m
2014-09-20 12:24:36 +09:00
Randy Mackay
6951a20fb0
Copter: soften loiter target when maybe landed
...
Applies to auto's land, land, loiter, pos hold and rtl flight modes
2014-09-19 16:43:12 +09:00
