Andrew Tridgell
97ed733ada
Rover: use L1 controller for navigation
...
this uses the AP_L1_Control library for rover navigation
2013-09-09 18:04:40 +10:00
Andrew Tridgell
396c4f30d2
AP_InertialSensor_PX4: don't set QUEUEDEPTH
...
the default of 2 samples is fine
2013-09-09 18:04:40 +10:00
Andrew Tridgell
db14a85fc5
AP_Compass: added more debugging to AP_Compass_PX4 driver
...
this helps debug compass initialisation issues
2013-09-09 18:04:40 +10:00
Andrew Tridgell
8b80beadc4
PX4: make FMUv2 identify itself differently
...
so we can tell which is which in logs
2013-09-09 18:04:40 +10:00
Randy Mackay
1d55fa6818
Copter: add arm check of GPS hdop when in Loiter
2013-09-09 14:03:40 +09:00
Randy Mackay
1abb439051
Copter: move acro's var initialisation to roll-pitch and yaw controller initialisation
2013-09-09 10:54:13 +09:00
Randy Mackay
942ba0476b
Copter: remove manual_attitude and throttle flags
2013-09-09 10:44:53 +09:00
Randy Mackay
b7579bb028
Copter: move init of global nav variables to set_nav_mode
2013-09-09 10:37:44 +09:00
Randy Mackay
4842335a24
Copter: add #include for AC_Sprayer
2013-09-09 10:18:06 +09:00
Randy Mackay
13ee672eae
Copter: remove unused get_acro_pitch and roll
2013-09-09 10:11:23 +09:00
Andrew Tridgell
f6688582a6
Plane: added FENCE_ACTION=3 behaviour
...
this makes it safer to enable the geofence as a receiver failsafe
mode. It retains manual throttle control, so if it triggers on the
ground due to the receiver losing signal from the transmitter then the
throttle can be kept low, preventing an unexpected takeoff.
2013-09-08 07:31:10 +10:00
Andrew Tridgell
7328369b91
GCS_MAVLink: added FENCE_ACTION_GUIDED_THR_PASS
2013-09-08 07:29:30 +10:00
Andrew Tridgell
ff0f6bcd42
AP_InertialSensor: fixed example build
2013-09-07 21:03:59 +10:00
Andrew Tridgell
905c84bb4c
PX4: move PX4IO update to before any sensors start
...
this seems to make the update much more reliable, possibly as it
avoids an interrupt load from l3gd20 driver
2013-09-07 17:39:51 +10:00
Andrew Tridgell
b8b72819c1
AP_Compass: ignore COMPASS_ORIENT for internal compass
...
this means if COMPASS_ORIENT is not 0 and the external compass fails
to start on boot we don't end up with a bad compass orientation
2013-09-07 16:49:51 +10:00
Craig3DRobotics
630095adaa
Revert "Copter: Corrected SR0 & SR3 parameter descriptions"
...
This reverts commit 6568234018
.
2013-09-06 09:58:19 -07:00
Andrew Tridgell
ef6407988b
PX4: avoid nsh redirects in if statements
...
this helps avoid FAT filesystem corruption
2013-09-06 22:14:04 +10:00
Andrew Tridgell
e43234874a
build: avoid rebuilding PX4 archives for each copter type
...
this should make build_binaries.sh much faster
2013-09-06 20:05:23 +10:00
Craig3DRobotics
2b726abe0e
Plane: Correction on SR0 & SR3 parameter description.
2013-09-05 22:29:10 -07:00
Craig3DRobotics
f1a674ad26
Copter: Correction on SR0 & SR3 parameter description.
2013-09-05 22:28:34 -07:00
Craig3DRobotics
a6efe45bf5
Rover: Correction on SR0 & SR3 parameter description.
2013-09-05 22:27:17 -07:00
Andrew Tridgell
b992423f4d
autotest: log versions of trees in build log
2013-09-06 11:46:19 +10:00
Andrew Tridgell
7536e0759d
PX4: enable rgbled on FMUv1
2013-09-06 08:15:31 +10:00
Andrew Tridgell
5484b97419
AP_GPS: reset _fix_count to 0 on nav settings update
...
this makes it run every 20s exactly
2013-09-04 13:18:00 +10:00
Andrew Tridgell
879d44f930
AP_GPS: use the mask bits to only set dynamic model
...
this ensures we don't try to change any other CFG_NAV5 settings
2013-09-04 13:17:20 +10:00
Andrew Tridgell
cfeecdae46
Rover: raise GPS serial buffer size
2013-09-04 13:17:02 +10:00
Andrew Tridgell
c15d784976
autotest: added comment for typical command line
2013-09-04 13:16:14 +10:00
Andrew Tridgell
0c926c38b1
PX4: boot the FMU bootloader in ROMFS
2013-09-04 13:15:51 +10:00
Andrew Tridgell
fa107bdb58
PX4: moved UART handling to its own thread
...
this prevents slow writes to the SD card from interfering with MAVLink
or GPS serial communication
2013-09-04 13:15:27 +10:00
Andrew Tridgell
474a6d1218
PX4: added FMU bootloader images to ROMFS
...
this makes it much easier for users to update their bootloaders
2013-09-04 12:53:56 +10:00
Andrew Tridgell
639f479c45
build: cope with config.mk from configure
...
the HAL_BOARD syntax doesn't work with shell with set -e
2013-09-04 12:03:54 +10:00
Andrew Tridgell
4a8c9a7765
Plane: support reboot to bootloader
2013-09-04 11:59:16 +10:00
Andrew Tridgell
979636936d
Copter: support reboot to bootloader
2013-09-04 11:59:02 +10:00
Andrew Tridgell
1ca1b1e36e
Rover: support reboot to bootloader
2013-09-04 11:58:41 +10:00
Andrew Tridgell
7082e0f8aa
AP_HAL: added hold_in_bootloader parameter to scheduler->reboot()
2013-09-04 11:58:13 +10:00
Andrew Tridgell
1328316bfc
AP_Airspeed: fixed saving of airspeed ratios
2013-08-31 10:26:27 +10:00
Paul Riseborough
1c7bdc40ec
AP_Airspeed : Expanded range of ARSPD_RATIO adjustment
2013-08-31 08:03:11 +10:00
Andrew Tridgell
8bb35f5dad
firmware: fixed link name
2013-08-30 20:21:43 +10:00
Andrew Tridgell
25255d79e8
PX4: cope with relative path for PX4_ROOT in build_binaries.sh
2013-08-30 17:59:32 +10:00
Andrew Tridgell
35ae989675
firmware: update MP icon
2013-08-30 16:33:45 +10:00
Andrew Tridgell
835740b387
firmware: added MissionPlanner link to top level
2013-08-30 16:18:14 +10:00
Andrew Tridgell
e8fc8cea01
AP_Scheduler: updated docs
2013-08-30 15:33:30 +10:00
Andrew Tridgell
8d08f6d669
AP_Relay: document new relay pin numbers
2013-08-30 15:21:23 +10:00
Andrew Tridgell
5e33bbd197
PX4: fixed sense of relay pins
2013-08-30 15:05:29 +10:00
Andrew Tridgell
a00e4a1e83
Plane: send GCS message on relay change
...
makes it easier to debug
2013-08-30 15:05:16 +10:00
Andrew Tridgell
45cf82ba15
Plane: removed CONFIG_RELAY check
...
relay is always available
2013-08-30 14:40:47 +10:00
Andrew Tridgell
c56017d8f1
AP_AHRS: added in new orientations
2013-08-30 14:19:17 +10:00
Andrew Tridgell
9320e82ac2
AP_Compass: added in new orientations
2013-08-30 14:19:03 +10:00
Andrew Tridgell
38bf6b8587
Rover: change to 2.43beta3
2013-08-30 14:02:49 +10:00
Andrew Tridgell
4762b3e7c6
Plane: change to 2.75beta2
2013-08-30 14:02:21 +10:00