rmackay9
2df7a407da
ArduPlane: fix HIL build
2012-11-07 21:23:07 +09:00
rmackay9
d9b4407e64
AP_InertialSensor: changes after review with Tridge.
...
sanity checking added to accelerometer calibration routine.
user feedback is sent using gcs_send_text_fmt instead of Serial.printf.
moved ins parameters to new eeprom number to avoid conflicts with older parameters.
other small changes including renaming of functions and parameters.
2012-11-07 19:21:15 +09:00
rmackay9
ef727bbb3c
ArduPlane: move to use new INS library instead of IMU library
2012-11-07 19:21:03 +09:00
Andrew Tridgell
8652bfee8d
APM: added RSSI_PIN option for receiver RSSI
...
this allows you to configure the pin for receiver RSSI without
recompiling
2012-11-06 22:04:41 +11:00
Andrew Tridgell
c7b47a0e47
APM: allow for arbitrary ranges and reversal on 2nd aileron
...
this ensures you can setup a 2nd aileron with different reversal from
main aileron
2012-11-05 23:37:58 +11:00
Andrew Tridgell
9c140356f5
APM: remove unused variable
2012-11-05 15:22:56 +11:00
Andrew Tridgell
2793e432ff
APM: use raw GPS velocity in GLOBAL_POSITION_INT
...
a much more useful value to log
2012-11-05 14:58:40 +11:00
Andrew Tridgell
aa236c43f8
APM: prepare for 2.66
2012-10-31 13:25:19 +11:00
Andrew Tridgell
81d507d39e
APM: fixed differential spoilers in manual mode
...
make them follow the elevons
2012-10-31 12:43:53 +11:00
Andrew Tridgell
8c0296b27a
APM: fixed additional aileron channels in manual mode
2012-10-31 12:43:53 +11:00
Xichen Shi
8c46fced16
APM: Added functionality to use differential spoilers in elevon mode
...
spoiler 1 and 2 are connected to 2 auxiliary channels, functions are
set to 16 on left wing and 17 om right wing respectively. Worked in
FBW + mode (auto etc.). No manual mode supported yet (need more
channels in my case).
2012-10-31 12:43:42 +11:00
Andrew Tridgell
e479af67ff
APM: fixed loiter radius docs to reflect new limit
2012-10-30 16:19:24 +11:00
Pat Hickey
d4bb8a10d7
Update ArduCopter and ArduPlane dependencies on AP_Menu
2012-10-18 20:53:39 -07:00
Andrew Tridgell
07c291bb73
APM: fixed a comment typo
2012-10-16 17:21:04 +11:00
Andrew Tridgell
f828956cb8
battery: use set_pin() to allow pins to be changed at runtime
2012-10-16 17:20:49 +11:00
rmackay9
775489d658
ArduPlane: added BATT_VOLT_PIN and BATT_CURR_PIN parameters to allow support for new 3DR IV battery monitor
2012-10-13 20:51:41 +09:00
Andrew Tridgell
0bc1f89f27
APM: fixed typo
2012-10-11 15:03:52 +11:00
Andrew Tridgell
c9f10f0e00
APM: fixed auto-takeoff with zero lat/lng
...
consider a non-zero altitude to mean that we should use the relative
altitude specified
2012-10-11 15:03:00 +11:00
Andrew Tridgell
0495a0debc
APM: make error msg clearer
2012-10-11 11:51:24 +11:00
rmackay9
f695db61ea
ArduPlane: added AP_Semaphore.h to list of includes
2012-10-06 13:14:28 +09:00
Michael Oborne
a38fef65c7
AP,AC Add ability to override an altitude in any auto mode, on the current active target
2012-09-30 07:29:33 +08:00
rmackay9
8c6fd340d7
AP_AHRS: added scheduler parameter to init
...
Required by the AP_AHRS_MPU6000 class which needs to disable timed processes that could interfere with it's communication with the mpu6000
2012-09-29 13:51:21 +09:00
rmackay9
41fbb19cf5
AP_InertialSensor_MPU6000: replaced _cs_pin parameter with #define and saved 1 byte of memory
...
Updated ArduCopter, ArduPlane and example sketches in AP_InertialSensor, AP_IMU and AP_AHRS libraries because they no longer need to pass in cs_pin to the constructor
2012-09-28 19:21:59 +09:00
Andrew Tridgell
bbec662483
APM: fixed build warning
2012-09-25 07:21:03 +10:00
Andrew Tridgell
fbc053e6e4
APM: change to one low priority status buffer per GCS instance
...
this allows us to operate the low priority messages on each link
independently.
Thanks to David Buzz for the suggestion!
2012-09-24 17:39:19 +10:00
Andrew Tridgell
51aeb2dd4c
APM: prepare for 2.65
2012-09-24 07:14:30 +10:00
Andrew Tridgell
d5c35fcc8b
APM: fixed stick mixing for STABILISE mode
...
this is embarrassing
2012-09-24 07:14:30 +10:00
Andrew Tridgell
a4c3c5973d
APM: prepare for 2.64 release
2012-09-23 19:32:56 +10:00
Andrew Tridgell
56c354eb4f
APM: fixed stick mixing in CIRCLE mode on throttle failsafe
...
Many thanks to Andke for finding this bug!
2012-09-23 19:27:42 +10:00
Andrew Tridgell
41017442f8
APM: removed unnecessary waypoint_sending flag
2012-09-22 20:17:19 +10:00
Andrew Tridgell
f0f47f929a
APM: send right parameter index when possible
2012-09-22 20:17:17 +10:00
Andrew Tridgell
764d86216e
APM: fixed mission reset by setting waypoint to zero
...
this does a full mission reset (equivalent to rebooting)
2012-09-22 20:17:13 +10:00
Andrew Tridgell
6bae5ecd51
APM: added THR_SUPP_MAN option
...
this allows for manual throttle control during auto throttle
suppression. This is useful for keeping a petrol engine idling before
takeoff
2012-09-22 20:17:06 +10:00
Andrew Tridgell
5c402fa398
APM: allow RawSensors stream rate to be saved if <= 5
...
this makes it possible to configure all stream rates via a parameter
file
2012-09-22 20:17:02 +10:00
Andrew Tridgell
63940d3ab6
APM: don't send GPS_STATUS MAVLink message
...
it now provides no useful information as satellites_visible is in
GPS_RAW_INT in MAVLink 1.0
2012-09-22 20:12:43 +10:00
Andrew Tridgell
cbc4a57abb
APM: send airspeed sensor value, not estimate, when enabled
...
this solves the problem of people reporting that airspeed is not shown
when ARSPD_USE is zero.
2012-09-20 08:00:54 +10:00
Andrew Tridgell
832c5e996e
APM: make it possible to fetch parameters by index
2012-09-20 07:42:46 +10:00
Andrew Tridgell
3077de0d33
APM: much faster parameter fetching
...
allow up to 30% of bandwidth to be used for parameter send
2012-09-20 07:29:23 +10:00
Andrew Tridgell
68f1b6336f
APM: tweak the default options for an APM1 1280 board
...
this allows a few more things to fit in
2012-09-19 19:36:19 +10:00
Andrew Tridgell
cebb67e1df
APM: removed the unused sonar code
...
when we start supporting a sonar we'll add a AP_Sonar library, like
AP_Airspeed
2012-09-19 19:35:22 +10:00
Andrew Tridgell
2324997e16
APM: added ALT_OFFSET parameter
...
useful to adjust for barometric pressure changes during a long flight
2012-09-19 16:23:25 +10:00
Andrew Tridgell
37cb56f3e1
APM: save another few bytes
2012-09-18 13:58:50 +10:00
Andrew Tridgell
df962d25a8
APM: fixed a comment
2012-09-18 13:58:49 +10:00
Andrew Tridgell
12dc2e79cf
APM: save 100 bytes of memory
...
remove flight_mode_strings array
2012-09-18 13:58:49 +10:00
Andrew Tridgell
86face0a03
APM: preparing for 2.63 release
2012-09-17 17:32:13 +10:00
Andrew Tridgell
4d4a95501f
APM: updates for new GPS detection
2012-09-17 14:45:47 +10:00
Andrew Tridgell
7e8ef0ae95
APM: fixed handling of DO_REPEAT_SERVO and DO_REPEAT_RELAY
2012-09-17 14:45:47 +10:00
Andrew Tridgell
c8e84d18a4
APM: tidy up a comment
2012-09-16 15:51:13 +10:00
Andrew Tridgell
c0798730a8
APM: only copy manual channels in failsafe
...
this prevents non-manual channels changing value away from the trim
value on startup
2012-09-16 15:51:01 +10:00
Andrew Tridgell
127117b640
APM: ensure DO_SET_SERVO channels are enabled
2012-09-16 15:08:14 +10:00