Andrew Tridgell
952c56e990
Copter: fixed barometer init in HIL sensors mode
2013-03-18 16:20:25 +11:00
Andrew Tridgell
ac06b5e62d
Copter: remove unused function
2013-03-18 16:20:25 +11:00
Randy Mackay
36834e77b5
Copter: remove support for CLI Slider
2013-03-18 14:07:04 +09:00
Randy Mackay
597a4b912a
Copter: fix to allow building HIL_MODE_SENSORS
2013-03-18 13:41:52 +09:00
Randy Mackay
d1344e8c39
Copter: remove #define for CROSSTRACK_GAIN
...
Note: the cross track is still calculated inside the inertial nav based
loiter and wp controls but it's no longer requires a tunable parameter
2013-03-17 16:56:18 +09:00
Randy Mackay
1b6fcad90a
Copter: remove tilt compensation parameter
...
Note: this idea of feed forward tilt compensation is being incorporated
into the inertial nav based loiter and wp controllers but does not
require a separate tunable parameter
2013-03-17 16:53:32 +09:00
Randy Mackay
61e29173e3
Copter: remove unused crosstrack variables and parameters
...
Cross track is still calculated internally to the wpnav controller so we
should move this to a library and still report it to the ground station
2013-03-17 16:46:31 +09:00
Randy Mackay
a1295c042b
Copter: fix init of wp_verify_byte so wp alt is always required
2013-03-17 16:37:30 +09:00
Randy Mackay
fdcb78ccf7
Copter: leonard's smoother alt-hold transition
...
Target altitude when entering alt-hold is based on a projection from
current alt and climb rate
2013-03-17 13:24:49 +09:00
Randy Mackay
37040adfaa
Copter: bug fix for auto missions over 320m
...
get_throttle_althold_with_slew's target_alt parameter defined as int16_t
(instead of int32_t) meaning missions with altitudes >320m could wrap
around and become negative.
2013-03-17 11:14:35 +09:00
Randy Mackay
150046f2b8
Copter: GPS Failsafe implemented
...
Switches to LAND mode 5 seconds after losing GPS if you're in a flight
mode that requires a GPS
2013-03-16 17:27:46 +09:00
Randy Mackay
f9539384a1
Copter: rename failsafe to failsafe_radio
...
Makes way for separation of failsafes for throttle, gps and gcs
2013-03-16 17:14:21 +09:00
Randy Mackay
f263e81ed7
Copter: remove unused GPS and baro filters
...
Saves 24bytes of RAM
Removing the baro filter leads to noisier Baro Alt appearing in the log
so we should make the inertial nav altitude appear in the CTUN message
2013-03-16 00:20:15 +09:00
Randy Mackay
5380973225
Copter: only start delay timer after reaching wp location and altitude
2013-03-06 12:50:41 +09:00
Randy Mackay
a73f50494c
TradHeli: remove duplicate RC_FAST_SPEED definition
2013-03-04 23:45:23 +09:00
Randy Mackay
cb6ffc7acf
Copter: minor formatting fix for report_ins
2013-03-04 23:14:14 +09:00
Randy Mackay
998511f506
Copter: use unsigned long for dataflash log for gps time
...
Updated some formatting of comments in the same file
2013-03-04 23:13:06 +09:00
Randy Mackay
33bd984a91
Copter: remove unused input_voltage parameter
2013-03-03 23:23:54 +09:00
Randy Mackay
cb84ec9d9b
Copter: add current based compass compensation
2013-03-03 23:02:36 +09:00
Andrew Tridgell
c2fd1512ff
Copter: use voltage_average() so as to avoid INPUT_VOLTS
2013-03-03 16:16:01 +11:00
Randy Mackay
0d5e731a65
Copter: add compassmot to cli
...
Allows user to setup compensation for motor's interference on the
compass
2013-03-02 17:54:18 +09:00
Randy Mackay
476a6d0164
Copter: fix for acro throttle bug
2013-03-02 10:28:44 +09:00
Randy Mackay
6b2b69535f
Copter: Compass log stores/retrieves motor offsets
2013-03-02 00:03:20 +09:00
Randy Mackay
d8515ff85e
Compass: basic compensation for motor interference
2013-03-02 00:03:16 +09:00
Andrew Tridgell
637ecd5279
Copter: updates for new dataflash API
2013-03-01 07:18:26 +11:00
Andrew Tridgell
9a3bd17cfb
Copter: fixes for new DataFlash API
2013-03-01 07:18:25 +11:00
Randy Mackay
e0506bd622
Copter: inav circle initial implementation
2013-02-26 11:35:35 +09:00
Randy Mackay
c8f09ac219
Copter: fix compile error for PX4 re Compass logging
2013-02-25 13:26:58 +09:00
Randy Mackay
d6ff5ae261
Copter: add roll-pitch slew for auto modes
...
Added reporting of roll, pitch inputs for ACRO, AUTO
2013-02-24 14:42:04 +09:00
Randy Mackay
e297ba7d18
Copter: update default loiter gains for inertial nav
2013-02-24 14:42:00 +09:00
Randy Mackay
102b5da59d
Copter: remove unnecessary #defines from APM_Config.h
2013-02-24 14:41:56 +09:00
Randy Mackay
cbde042ec5
Copter: remove non-inav loiter and wp controllers
...
lon_speed, lat_speed changed to float
do_takeoff, do_land now set roll-pitch, yaw and nav modes specifically
removed fast_corners functionality (may need to be reimplemented with
new inertial nav controllers)
2013-02-24 14:41:52 +09:00
Randy Mackay
609676e26c
Copter: add logging of compass values
...
Removed rarely used ITERM because we didn't have enough bits in the log
mask
2013-02-24 14:41:48 +09:00
Randy Mackay
6f27bc7ae5
Copter: remove filters from inav loiter
2013-02-24 14:41:44 +09:00
Randy Mackay
1410063a14
Copter: new ROLL_PITCH_WP_INAV roll-pitch mode
...
small corrections to allow waypoints to work with new inertial nav wp
controller
2013-02-24 14:41:40 +09:00
Randy Mackay
574756908d
Copter: set wpinav controller targets in nav calls
...
All navigation commands now properly set wpinav controller targets
except CIRCLE related commands.
2013-02-24 14:41:36 +09:00
Randy Mackay
00bc28adcc
Copter: take-off code cleanup
...
remove redundant setting of loiter target.
explicitely set throttle mode to THROTTLE_AUTO
2013-02-24 14:41:32 +09:00
Randy Mackay
67c69a19ee
Copter: remove baro-only alt hold
...
Saves 8 bytes of memory and more importantly simplifies the alt hold
calculations
2013-02-24 14:41:29 +09:00
Randy Mackay
37d3e1d7e4
Copter: add zero slope checks to wpinav
...
also added RTL fix to set wpinav target explicitly
2013-02-24 14:41:25 +09:00
Randy Mackay
b74da54c98
Copter: enable inav xy by default
2013-02-24 14:41:21 +09:00
Randy Mackay
53ab1d5d9b
Copter: add advance track call to actually move towards waypoint
...
Also added unrelated check that waypoint is valid before updating
waypoint distance.
2013-02-24 14:41:17 +09:00
Randy Mackay
766ccdf6f8
Copter: add selection of inertial nav wp controller to APM_Config.h
2013-02-24 14:41:13 +09:00
Randy Mackay
fcf102b2cf
Copter: inertial nav waypoint controller
...
#define added to allow compile time selection of traditional or inav
based loiter and wp controllers
2013-02-24 14:41:09 +09:00
Jason Short
4c3ee76900
AC: Moving flip speed back to 400°/s to prevent oscillation around change in speed.
...
Would like to add a more gradual speed change in the finish. Might require a new state as the copter passes -90°
2013-02-23 13:14:15 +09:00
Jason Short
7d5b975da2
AC: Flip code fix
...
Flight tested it today and made some flips. Throttle adjusted in Manual throttle modes. Not tested in AP throttle modes such as alt hold.
2013-02-23 13:14:11 +09:00
Randy Mackay
8e4c9518ea
Copter: increase low voltage check to 10.5v
...
Change requested by Rob Lefebvre and Richie Wilson
2013-02-23 00:36:51 +09:00
Jason Short
abd0fb9099
AC : global static variables should not be initialized to zero
2013-02-22 17:34:18 +09:00
Andrew Tridgell
4c7a1a1806
Copter: change PX4 main baud rate back to 115200
...
we now use USB console
2013-02-22 07:04:23 +11:00
Randy Mackay
2ecf34e509
Copter: update version to 2.9.1 ahead of release
2013-02-19 13:52:04 +09:00
Randy Mackay
d48aebea8e
Copter: updated release notes for 2.9.1-rc2
2013-02-19 13:49:53 +09:00
