Commit Graph

9636 Commits

Author SHA1 Message Date
Andrew Tridgell 7f6eecd9d5 Plane: cleanup cruft in Makefile 2013-10-13 21:41:01 +11:00
Randy Mackay 959f59f623 Copter: correct mount tasks scheduler time
Having the estimate too high would mean it would likely never run
2013-10-13 14:13:59 +09:00
Randy Mackay f344c77cca Copter: AC3.1-rc4 version and release notes 2013-10-13 14:12:18 +09:00
Randy Mackay bf74a64fec Copter: add GPS glitch to arming checks 2013-10-13 14:04:54 +09:00
Randy Mackay 8de6c34252 Copter: comments update for GPS_HDOP_GOOD parameter 2013-10-13 13:53:26 +09:00
Randy Mackay 32f53624d6 Copter: rename low_battery to failsafe.battery 2013-10-13 13:52:52 +09:00
Randy Mackay 0e740bd4e1 Copter: enable AUTOTUNE for mission planner build 2013-10-13 11:57:50 +09:00
Randy Mackay 6876107a15 Copter: autotune disables rate output from stab controller 2013-10-13 11:56:01 +09:00
Andrew Tridgell b69f08c03e Copter: reduce timer speed to 500 on APM2
this reduces the cost of timer interrupts
2013-10-13 11:03:41 +09:00
Andrew Tridgell a5788dde8f HAL_AVR: added Scheduler.set_timer_speed() support 2013-10-13 11:03:37 +09:00
Andrew Tridgell 7ef187fcfd AP_HAL: added optional set_timer_speed() scheduler API
will be used by copter to reduce interrupt load on APM2
2013-10-13 11:03:35 +09:00
Andrew Tridgell 09a1d35e62 Copter: fixed build for no COPTER_LEDS 2013-10-13 11:03:33 +09:00
Andrew Tridgell a3168bcbaa Plane: fixes for AP_Mount API 2013-10-13 11:03:31 +09:00
Andrew Tridgell f62c53502d Rover: fixes for AP_Mount API 2013-10-13 11:03:28 +09:00
Andrew Tridgell d38d9ea88f Copter: changes for AP_Mount API 2013-10-13 11:03:26 +09:00
Andrew Tridgell 4de2a654ab AP_Mount: changed ahrs to be a const reference
saves a bit of code
2013-10-13 11:03:24 +09:00
Randy Mackay 8706810d55 Copter: scheduler times corrections 2013-10-13 11:03:22 +09:00
Randy Mackay 6be6bd5aed Copter: remove unused battery analog sources 2013-10-13 11:03:20 +09:00
Andrew Tridgell 34770fe6bf HAL_AVR: fixed SPI bus speed switching
this fixes a bug in changing the bus speed between devices
2013-10-13 11:03:17 +09:00
Randy Mackay d2bda8c235 Copter: split up medium loop 2013-10-13 11:03:15 +09:00
Randy Mackay f2f61af125 HAL_AVR: scheduler interrupt 500hz for APM2 2013-10-13 11:03:13 +09:00
Randy Mackay e9cefbafd1 Copter: higher priority for throttle loop, lower telemetry 2013-10-13 11:03:10 +09:00
Andrew Tridgell 9833900f91 AP_InertialSensor: run MPU6000 sensor register reads at 8MHz
run other register IO at 500kHz
2013-10-13 11:03:08 +09:00
Andrew Tridgell 04836ea763 HAL_AVR: set initial bus speed on MPU6k to 500kHz, then change to 8MHz
this should allow us to work even with older chips. See the MPU6000
product specification, which says max 20MHz for sensor and interrupt
regs, and max 1MHz for all other regs
2013-10-13 11:03:06 +09:00
Andrew Tridgell 5ccf8409b4 AP_HAL: added an optional spi.set_bus_speed() API
this will be used by MPU6000 on APM2 to change speed after init
2013-10-13 11:03:04 +09:00
Andrew Tridgell 4dc2f4bd58 HAL_AVR: spi3 at 8mhz for mpu6k and ms5611 2013-10-13 11:03:02 +09:00
John Arne Birkeland f6038f36bf HAL_AVR: Improved AVRTimer micros() and millis()
- More efficient code by using 16-bit timer
- micros() now has proper 1 us resolution and less overhead
- millis() has less overhead
- removed unneeded/unwanted initializatin of timers in AVRTimer::init()
2013-10-13 11:03:00 +09:00
Andrew Tridgell 5ba34b38c1 HAL_AVR: added specialised transfer functions for MPU6k and APM1 ADC
this saves quite a lot of time in interrupts
2013-10-13 11:02:57 +09:00
Andrew Tridgell 64d34dc125 Copter: give UARTA 512 bytes
this reduces load by allowing more contiguous writes to the serial
buffers
2013-10-13 11:02:55 +09:00
Andrew Tridgell d60a68fd9c AP_Baro: check baro at exactly 100Hz
prevent waits for samples
2013-10-13 11:02:53 +09:00
Randy Mackay 499bc52c5b Perfmon: fixes to work with HAL 2013-10-13 11:02:49 +09:00
Andrew Tridgell e34cc6dd9a HAL_PX4: added some UART debugging
this may help to track down USB issues
2013-10-13 12:43:25 +11:00
Andrew Tridgell 035ac3800a Plane: use G_Dt for acro angle integration
also cleanup some other uses of performance timing
2013-10-12 13:30:27 +11:00
Andrew Tridgell 05115684c1 Plane: pass FlightStage to TECS
this will allow for better throttle and pitch control on landing
2013-10-12 13:14:30 +11:00
Andrew Tridgell 55ba536331 HAL_SITL: fixed a warning 2013-10-12 13:13:00 +11:00
Andrew Tridgell 84336bc74e AP_TECS: added initial flight_stage handling 2013-10-12 13:12:43 +11:00
Andrew Tridgell 2b80df6319 AP_SpdHgtControl: added FightStage parameter to update_pitch_throttle()
will be used for special landing handling
2013-10-12 13:12:16 +11:00
Craig3DRobotics 6ffd84b0bd Iris: Set FS_BATT_VOLTAGE 2013-10-11 16:13:12 -07:00
Craig3DRobotics 473689d945 Iris: Update flight modes 2013-10-11 15:28:53 -07:00
Andrew Tridgell 5acc372f40 Rover: support MAV_CMD_DO_SET_CAM_TRIGG_DIST 2013-10-11 21:42:13 +11:00
Andrew Tridgell 3b9566bc09 Copter: support MAV_CMD_DO_SET_CAM_TRIGG_DIST 2013-10-11 21:40:57 +11:00
Andrew Tridgell 0ec322ee47 Plane: support MAV_CMD_DO_SET_CAM_TRIGG_DIST 2013-10-11 21:37:27 +11:00
Andrew Tridgell 0f0b040891 AP_Camera: added set_trigger_distance() call 2013-10-11 21:37:27 +11:00
Andrew Tridgell 1c7a44a595 GCS_MAVLink: regenerate mavlink headers 2013-10-11 21:37:27 +11:00
Andrew Tridgell 8198bfe756 MAVLink: added MAV_CMD_DO_SET_CAM_TRIGG_DIST 2013-10-11 21:36:50 +11:00
Andrew Tridgell 6a93e0cae4 Rover: remove some unused functions 2013-10-11 21:36:50 +11:00
Andrew Tridgell 72505cf4e5 Plane: release 2.75beta3 2013-10-11 16:29:08 +11:00
Andrew Tridgell 63bee0b2d8 HAL_PX4: disable checks for in_timerprocess
these are not valid in this form for the way the timer thread works on
PX4.
2013-10-11 16:06:35 +11:00
Andrew Tridgell 25d3e5b7e9 AP_GPS: changed fake GPS fix to have a latitude/longitude
Pair-Programmed-With: Randy Mackay <rmackay9@yahoo.com>
2013-10-11 16:06:35 +11:00
Andrew Tridgell dcb01d193d autotest: fixed ACRO attitude locking in plane 2013-10-10 17:35:17 +11:00