Mirror/ardupilot
5
0
Fork 0
mirror of https://github.com/ArduPilot/ardupilot synced 2025-01-09 09:28:31 -04:00
Code Issues Packages Projects Releases Wiki Activity
3,891 Commits 71 Branches 510 Tags 774 MiB
927834106d
Commit Graph

3891 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Andrew Tridgell
47ddd4dfdd SITL: disable interrupts during register updates 
this may prevent bogus mode channel reads
 2012-03-10 10:34:30 +11:00
Andrew Tridgell
7256652de5 Quaternion: use GPS to correct for linear acceleration 
this gives much better pitch estimates. We should do this with the
airspeed sensor if available.
 2012-03-10 10:34:30 +11:00
Andrew Tridgell
c7ef72cf28 Quaternion: don't update if we have a very long deltat 
this can be caused by stopping the system in a debugger
 2012-03-10 10:34:30 +11:00
Andrew Tridgell
6d356b6c6e Compass: fixed last_update time for HIL compass 2012-03-10 10:34:30 +11:00
Andrew Tridgell
ebc55bb494 RC: disable interrupts when reading the RC registers 
this prevents getting bogus values which could cause a flight mode
change
 2012-03-10 10:34:30 +11:00
Andrew Tridgell
57f67ca6e3 GPS: added an acceleration estimate to the GPS driver 
This uses the GPS ground speed to estimate acceleration
 2012-03-10 10:34:30 +11:00
Andrew Tridgell
7fbfcc2721 GPS: fixed some stdint types 2012-03-10 10:34:29 +11:00
Andrew Tridgell
e699e9ace0 Quaternion: added in reporting of gyro drift and rp/yaw errors 2012-03-10 10:34:29 +11:00
Andrew Tridgell
7a9b3d3388 Quaternion: show "Quaternion test" on startup if enabled 2012-03-10 10:34:29 +11:00
Andrew Tridgell
2a8b167d95 fixed comment 2012-03-10 10:34:29 +11:00
Andrew Tridgell
c73c55aa90 DCM: fixed an uninitialised variable warning 2012-03-10 10:34:29 +11:00
Andrew Tridgell
d8234882d4 Quaternion: tweak the quaternion gains a bit 2012-03-10 10:34:29 +11:00
Andrew Tridgell
cc887949c9 AP_IMU: improved the gyro calibration code 
this should give a much more accurate result
 2012-03-10 10:34:29 +11:00
Andrew Tridgell
ffa6786697 Quaternion: drop the gyro drift rates down 
this should allow us to cope with noise more readily
 2012-03-10 10:34:29 +11:00
Andrew Tridgell
bee4bd9474 DCM: fixed bug in accel averaging 
sorry Randy!
 2012-03-10 10:34:29 +11:00
Andrew Tridgell
25e5ddeaa4 AP_Quaternion: fixed build on Arduino 1.0 2012-03-10 10:34:29 +11:00
Andrew Tridgell
7e4c8592ff ACM: make it possible to build ArduCopter with quaternions 2012-03-10 10:34:29 +11:00
Andrew Tridgell
9bff4e2c4c ACM: only call the fast loop if the imu has new data 
this prevents us spinning waiting for the sensors to gather some data
 2012-03-10 10:34:29 +11:00
Andrew Tridgell
e39c3cb9d2 APM: make it possible to build ArduPlane with quaternion support 2012-03-10 10:34:29 +11:00
Andrew Tridgell
c369d9f60a AP_Quaternion: added DCM compatibility interfaces 
useful for getting the code going quickly
 2012-03-10 10:34:29 +11:00
Andrew Tridgell
6138f31cec AP_IMU: added new_data_available() interface 2012-03-10 10:34:29 +11:00
Andrew Tridgell
a9dea35310 AP_InertialSensor: added new_data_available() interface 2012-03-10 10:34:28 +11:00
Andrew Tridgell
c80ec9a55c AP_ADC: added new_data_available() interface 
returns true if more samples are available
 2012-03-10 10:34:28 +11:00
Andrew Tridgell
c8a459ab0d fixed deltat in quaternion 2012-03-10 10:34:28 +11:00
Andrew Tridgell
a791224d07 SITL: make SITL not depend on DCM 2012-03-10 10:34:28 +11:00
Andrew Tridgell
74eef7018a Quaternion: added an AP_Quaternion library 
this is for experimenting with the Madgwick quaternion system, to see
if it is more or less noise sensitive than DCM
 2012-03-10 10:34:28 +11:00
Andrew Tridgell
fd2a24f8ed SITL: reduce the simulated compass offsets 
this was causing us problems in getting DCM right
 2012-03-10 10:34:28 +11:00
Andrew Tridgell
367947fd33 HWSTATUS: if we don't know the voltage, report it as zero 
this will tell us if board_voltage() is really working
 2012-03-10 10:34:28 +11:00
Andrew Tridgell
64cc04ae09 ACM: adjust yaw drift correction constants 
this should give the compass a bit more authority
 2012-03-10 10:34:28 +11:00
Andrew Tridgell
511f65e2ef APM: fixed reset of control switch when short_fs_action is disabled 
When FS_SHORT_ACTN is 0, we should not re-read the control switch
unless we changed mode on the initial short fs action
 2012-03-10 10:34:28 +11:00
Andrew Tridgell
bddc6ba241 SITL: separate out drift speed and drift level 2012-03-10 10:34:28 +11:00
Andrew Tridgell
25cad09746 SITL: added a drift_level multiplier 
this makes it easier to experiment with different gyro drift levels
 2012-03-10 10:34:28 +11:00
Andrew Tridgell
b11b571778 DCM: fixed the averaging of accel values for update_DCM_fast() 
this should improve drift correction for ArduCopter
 2012-03-10 10:34:28 +11:00
Andrew Tridgell
145fc91701 AP_Math: added a .zero() method to Vector3f 2012-03-10 10:34:28 +11:00
Andrew Tridgell
ae51173656 SITL: fixed delay() to account for signal interrupions 
when a timer went off we stopped the delay() code
 2012-03-10 10:34:28 +11:00
Andrew Tridgell
fe173227de DCM_Test: fixed example code to work with SITL 
this also fixes the compass setup
 2012-03-10 10:34:27 +11:00
Andrew Tridgell
8424609924 SITL: push noise level to 2.0 for DCM testing 2012-03-10 10:34:27 +11:00
Andrew Tridgell
accc5dc02f autotest: run fg viewers with less CPU priority 2012-03-10 10:34:27 +11:00
Andrew Tridgell
5e66d3cecb autotest: added CMAC test circuit 
this is what I am using for noise testing
 2012-03-10 10:34:27 +11:00
Andrew Tridgell
6ba6e11e7b DCM: added a small amount of accel smoothing to update_DCM_fast() 2012-03-10 10:34:27 +11:00
Andrew Tridgell
a0ce202d87 ACM: added SIMSTATE, DCM and HWSTATUS messages to ACM 2012-03-10 10:34:27 +11:00
Andrew Tridgell
3b1782f369 DCM: don't use the z accel sensor for drift correction 
the z accel is the noisest, and seems to do more harm than good. Using
just x and y is sufficient for drift correction by assuming the vector
length
 2012-03-10 10:34:27 +11:00
Andrew Tridgell
4031320f7c DCM: added a small amount of gyro and accel smoothing 
possibly not needed, but convenient to be able to test with different
values
 2012-03-10 10:34:27 +11:00
Andrew Tridgell
b455443e2c APM: added logging of DCM, HWSTATUS and SIMSTATE 2012-03-10 10:34:27 +11:00
Andrew Tridgell
94d0236b97 DCM: added reporting interfaces for DCM state 2012-03-10 10:34:27 +11:00
Andrew Tridgell
772c30ba86 SITL: added sitl_simstate_send() 
used to report simulator state in logs
 2012-03-10 10:34:27 +11:00
Andrew Tridgell
9df332f0ae MAVLink: import new message types DCM, HWSTATUS and SIMSTATE 2012-03-10 10:34:27 +11:00
Andrew Tridgell
cc8278c1ac DCM: got rid of _error_roll_pitch from object state 
this can be a local error variable in common with the yaw code. This
saves 12 bytes in the object.
 2012-03-10 10:34:27 +11:00
Michael Oborne
986f1675ad APM Planner 1.1.50 
rename messagebox to custommessagebox
mag calibration now working. > hardware setup tab
 2012-03-09 23:18:12 +08:00
Jason Short
486c56ce41 Consolidated Barometer pressure sensing to a single filter based on Randy's new filter class. 2012-03-08 23:13:04 -08:00