Commit Graph

42747 Commits

Author SHA1 Message Date
Michael du Breuil 911570e9f3 Plane: Protect against a divide by 0 when calculating the forward throttle compensation 2020-06-02 09:38:51 +10:00
Peter Barker ffaa60b9ed autotest: stop emitting duplicate rangefinder headings
This was only an issue for the Wasp rangefinder block, which drops stuff
in at the top level by specifying the same subgroup name as the top
level.
2020-06-02 09:37:33 +10:00
Randy Mackay 93d8458d2a AP_NavEKF3: FuseVelPosNED uses ext nav vel err in obs data check 2020-06-02 08:33:42 +09:00
Randy Mackay d37eec5fd8 AP_NavEKF3: ext nav vel corrected for sensor position when recalled from buffer 2020-06-02 08:33:42 +09:00
Randy Mackay 79901ffc1b AP_VisualOdom: pass velocity error to logger 2020-06-02 08:33:42 +09:00
Randy Mackay 08f6b2128e AP_Logger: add VISV field descriptions 2020-06-02 08:33:42 +09:00
Randy Mackay 714975662d AP_Logger: VISP message gets velocity error field 2020-06-02 08:33:42 +09:00
Randy Mackay 31763424a3 SITL: speed up vicon messages to avoid EKF timeouts during resets 2020-06-02 08:33:42 +09:00
Randy Mackay 630bc01101 AP_HAL_SITL: send vehicle velocity to sitl vicon class 2020-06-02 08:33:42 +09:00
Randy Mackay c8f6cb233b SITL: vicon supports sending vision-speed-estimate
SIM_VICON_TMASK controls which of the 3 supported messages are sent
SIM_VICON_VGLI_X/Y/Z allows introducing a velocity glitch
2020-06-02 08:33:42 +09:00
Randy Mackay 3a209d5d84 SITL: SIM_Vicon loses unused obs_elements structure 2020-06-02 08:33:42 +09:00
Randy Mackay cad9889656 AP_AHRS: send vision-speed-estimates to EKF3 2020-06-02 08:33:42 +09:00
chobits c7817eaca1 AP_NavEKF3: support VISION_SPEED_ESTIMATE
Co-authored-by: Randy Mackay <rmackay9@yahoo.com>
2020-06-02 08:33:42 +09:00
Randy Mackay bdb67532b0 AP_Math: clarify get_vel_correction_for_sensor_offset comment 2020-06-02 08:33:42 +09:00
Randy Mackay 4639e8a698 AP_Math: add get_vel_correction_for_sensor_offset 2020-06-01 17:51:24 +09:00
chobits 9b480ca755 AP_Logger: support VISION_SPEED_ESTIMATE 2020-06-01 17:51:24 +09:00
chobits 66a5f645d7 AP_VisualOdom: support VISION_SPEED_ESTIMATE 2020-06-01 17:51:24 +09:00
chobits ff6e4c4f9a GCS_MAVLink: support VISION_SPEED_ESTIMATE 2020-06-01 17:51:24 +09:00
chobits dee095b4a4 AP_NavEKF2: support VISION_SPEED_ESTIMATE 2020-06-01 17:51:24 +09:00
chobits c9e363d529 AP_AHRS: support VISION_SPEED_ESTIMATE 2020-06-01 17:51:24 +09:00
Randy Mackay baa33d99a9 Copter: version to 4.1.0-dev 2020-06-01 12:58:12 +09:00
Randy Mackay ce17844a72 Copter: release notes update for 4.0.4-rc1 2020-06-01 12:55:39 +09:00
Randy Mackay fb2ac2db93 Copter: release notes for 4.0.4-rc1 2020-06-01 12:55:37 +09:00
Rajat Singhal 969a66fa01 Tools: autotest: Add Max RC input test for Rover
Currently disabled since it triggers Arithmetic Exception
2020-05-31 21:11:36 +10:00
Peter Barker c474edbfbc autotest: attempt to make parameter download more reliable
something is stopping parameters from being fetched.  Give it time to
clear.
2020-05-30 10:11:07 +10:00
Rishabh e7d98648e6 AR_WPNav: Reset WP origin if recovering from OA 2020-05-30 08:55:45 +09:00
Rishabh 44f0aef5e9 AP_OAPathPlanner: Add param to reset WP origin while recovering from Bendy 2020-05-30 08:55:45 +09:00
Peter Barker 7bd32338ef travis: run tradheli tests 2020-05-29 19:12:20 +10:00
Peter Barker adeb37581f autotest: fix heli for setpoint change 2020-05-29 14:53:12 +10:00
Peter Barker aaef44858f autotest: add test for Heli stabilize-mode takeoff 2020-05-29 14:25:30 +10:00
Gone4Dirt 1b7672a84f AP_Motors: Correctly adjust heli run up timer in bailout 2020-05-28 18:50:08 -04:00
Iampete1 141ab622a3 SITL: examples: JSON: MATLAB: add pnet linux compiled 2020-05-29 08:25:24 +10:00
Iampete1 13965133b0 SITL: examples: JSON: add MATLAB example 2020-05-29 08:25:24 +10:00
Iampete1 fa712082d7 SITL: examples: add JSON readme 2020-05-29 08:25:24 +10:00
Iampete1 ce0cb9660f SITL: examples: add MATLAB TCP/UDP/IP Toolbox 2020-05-29 08:25:24 +10:00
Iampete1 0c6efa5f26 SITL: add JSON backend 2020-05-29 08:25:24 +10:00
Iampete1 c31a4f4b14 AP_HAL_SITL: add JSON backend 2020-05-29 08:25:24 +10:00
Andrew Tridgell ae0fbdfa07 Tools: updated CUAV-Nora bootloader 2020-05-28 19:14:15 +10:00
CUAVcaijie 220e6999c7 HAL_ChibiOS:Adapt to CUAV Nora V1.2 hardware 2020-05-28 19:13:49 +10:00
Peter Barker 1ebfc79eb0 AP_HAL_Linux: enable console for examples
Turns out we *do* need this for examples.  We're back to stuffing up
terminals where examples have been run, but that can be addressed later.
2020-05-28 13:49:47 +10:00
Peter Barker c44b760f3c autotest: explicitly run hello-world test and check for string 2020-05-28 13:49:47 +10:00
pkocmoud 67e79638d4 build_binaries: add mRoPixracerPro 2020-05-27 21:22:56 +10:00
pkocmoud 7809dc849c HAL_ChibiOS: Added support for mRo Pixracer Pro flight controller 2020-05-27 21:22:56 +10:00
Andrew Tridgell ebcbc6d449 Plane: update release notes for 4.0.6beta1 2020-05-27 13:27:27 +10:00
Andrew Tridgell 529bfe8fcd AP_GPS: fixed issue with GPS selection for moving baseline
when you have a moving baseline pair of ublox GPS modules and the
rover GPS does not have full fixed RTK lock on the base GPS then we
should not use it as our primary GPS as it's position and velocity can
be badly affected by the attempts of the GPS to gain a fixed lock.

This was observed in a flight with two F9P GPS, where the GPS velocity
data from the rover GPS went way off when it lost full RTK lock. It's
status stayed at 4, so it was selected as the primary GPS
2020-05-27 10:59:46 +10:00
Peter Barker b0916231b2 autotest: add tests for log download 2020-05-26 19:32:49 +10:00
MisterMower 41245acf14 AP_Logger: Added units to CurrTot message
Units are not associated with the CurrTot message. AP_BattMonitor.h indicates the total current consumed is reported in mAh. This change sets the units for CurrTot to Ampere seconds and applies a multiplier of 3.6 to convert the reported mAh value to Ampere seconds.
2020-05-26 16:19:14 +10:00
MisterMower 59a472e41e Tools: Added name to GIT_Success.txt
Added Drew Sandlin to GIT_Success.txt.
2020-05-26 16:19:14 +10:00
Peter Barker 6cdee8c830 AP_BLHeli: read more efficiently from telemetry UART 2020-05-26 15:59:11 +10:00
Peter Barker 6d9e563ede AP_HAL_ChibiOS: override read(buffer,count) method to be more efficient 2020-05-26 15:59:11 +10:00