This allows you to arm the copter without any extra GCS commands while
in auto, and can be done from both the GCS, or the RC Tx. This is useful
for creating a simpler workflow.
This also allows you to set the auto_armed flag internally, which
bypasses the need to raise the throttle stick for the copter to start a
takeoff.
This exposed a problem where we would start running the controllers
before the EKF was at all initialized, if you switched into auto to
early. This now has a check that prevents us from running the mission
state machine until after the origin has been set. This was a suggestion
from @rmackay9.
When combined these options allow you to have the vehicle on the ground,
disarmed in auto with a takeoff waypoint loaded, then just arm the
aircraft and watch it takeoff. This is a feature we've had on quadplanes
for quite awhile now, and it has proven to be very nice for operators.
includes the following changes
winch_update called at 50hz
removed ability to set winch rate from ch6 tuning
remove wheel encoder
call winch library to log at 10hz
fix winch param prefix
also guided mode now retracts landing gear after takeoff
previously landing gear deployment was "level based" meaning the pilot could not override the gear's position
Fixes this compiler error:
In file included from ../../ArduCopter/sensors.cpp:1:
In file included from ../../ArduCopter/Copter.h:195:
../../ArduCopter/mode.h:1291:9: fatal error: declaration shadows a variable in the global namespace [-Wshadow]
AUTO, // after A and B defined, pilot toggle the switch from one side to the other, vehicle flies autonomously
^
../../ArduCopter/defines.h:38:5: note: previous declaration is here
AUTO = 3, // fully automatic waypoint control using mission commands
^
1 error generated.
../../ArduCopter/mode_auto.cpp: In member function 'void ModeAuto::do_nav_delay(const AP_Mission::Mission_Command&)':
../../ArduCopter/mode_auto.cpp:1372:84: warning: format '%u' expects argument of type 'unsigned int', but argument 4 has type 'long unsigned int' [-Wformat=]
gcs().send_text(MAV_SEVERITY_INFO, "Delaying %u sec",nav_delay_time_max_ms/1000);
^
This is with a mini-pix build.
This makes us look like Rover and Plane in terms of namespacing for the
Mode classes, and removes a wart where we #include mode.h in the middle
of the Mode class.
This was done mechanically for the most part.
I've had to remove the convenience reference for ap as part of this.
bnsgeyer and rmackay9 contributed to these changes
make_safe_shut_down waits for spool down before disarming
remove use of attitude_control::set_throttle_out_unstabilized to consolidate logic between multicopters and tradhelis
Randy Mackay
Michael du Breuil
Andy Piper
Andrew Tridgell
murata
Rishabh
Peter Barker
Tom Pittenger
liang
Leonard Hall
Pierre Kancir
bnsgeyer
Arjun Vinod