Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
7,084 Commits 71 Branches 509 Tags 814 MiB
Commit Graph

2986 Commits

Author SHA1 Message Date
Andrew Tridgell 8f2f4b1bc5 HAL_PX4: use write() to /dev/pwm_output for servo output 
this lowest the cost of PWM output a lot, but relies on the new I2C
based IO firmware
 2013-01-25 20:44:36 +11:00
Andrew Tridgell 9b4c75c66b RC_Channel: don't change trim if radio in is zero 2013-01-25 20:44:36 +11:00
Andrew Tridgell f9d43f4c3e HAL_PX4: prevent loop() overruns using hrt 
this ensures if loop() takes more than 1 second, the main task gets
its priority dropped until loop() completes
 2013-01-24 15:04:57 +11:00
Andrew Tridgell 70227d5d93 HAL_PX4: added scheduler performance counters 2013-01-24 15:04:57 +11:00
Andrew Tridgell 0e79b93289 HAL_PX4: added storage performance counters 2013-01-24 15:04:57 +11:00
Andrew Tridgell fc8065b50f HAL_PX4: added UART performance counters 2013-01-24 15:04:57 +11:00
Andrew Tridgell 6cf1d5e1ff HAL_PX4: handle IO errors on microsd 
this should handle EINTR gracefully
 2013-01-24 15:04:57 +11:00
Randy Mackay 542e2e1358 AP_PerfMon: fixes to make it work under AP_HAL (almost) 2013-01-23 21:22:17 +09:00
Andrew Tridgell 966b9b9b9c HAL_PX4: format panic messages with a newline 2013-01-23 16:54:44 +11:00
Andrew Tridgell c9799fb2b7 HAL_PX4: writing more than 512 bytes at a time can cause IO errors 
the vfat fs in NuttX is really very picky!
 2013-01-23 16:54:44 +11:00
Andrew Tridgell 952df2fced HAL_PX4: new buffered storeage driver for microsd cards 
this does all IO in the timer thread, avoids writes that don't change
data, and does all writes in multiples of 128 byte chunks. This should
be about as friendly to SD cards as we can get.
 2013-01-23 16:37:40 +11:00
Andrew Tridgell f72b532405 HAL_PX4: ensure all writes go via buffers 
this prevents output corruption by direct fd writes
 2013-01-23 09:22:51 +11:00
Andrew Tridgell 2a10727902 HAL_PX4: run timer thread as SCHED_FIFO 
this ensures it never yields to the main thread, which would break our
locking assumptions
 2013-01-23 09:21:50 +11:00
Andrew Tridgell 930e79a9e1 HAL_PX4: fixed rcin->valid() for RC override input 2013-01-23 07:57:59 +11:00
Andrew Tridgell 06e63d3167 HAL_PX4: use pthread_yield() in main loop 
this lowers the latency of the main loop somewhat
 2013-01-23 07:36:13 +11:00
Andrew Tridgell 6e8501603c HAL_PX4: avoid RCOutput ioctl unless values change 
this lowers latency somewhat
 2013-01-23 07:29:59 +11:00
Andrew Tridgell 89cb3fbd61 HAL_PX4: fixed blocking IO in UART driver 2013-01-22 21:52:21 +11:00
Andrew Tridgell 6ffa18fa61 HAL_PX4: rewrite UART driver to be much more efficient 
this does the IO in the timer thread, and uses buffers in the main
task to avoid system call costs in the flight code.

The cost of PX4 read and write system calls is quite high - about 10
to 15 usec. We can't afford to pay that per byte
 2013-01-22 21:22:01 +11:00
Andrew Tridgell 37be83994f SITL: allow motor multiplier to work on quad simulation 2013-01-22 21:22:01 +11:00
Andrew Tridgell f0469a21f2 AP_Baro: fixed timestamp on baro for PX4 
milliseconds not microseconds
 2013-01-22 21:22:01 +11:00
Andrew Tridgell 80eaa52ed8 AP_Compass: use report timestamp on PX4 for accurate timing 2013-01-22 21:22:01 +11:00
rmackay9 6f1035debc InertialNav: added 300ms timeout after which error from gps heading will be set to zero 2013-01-22 18:37:54 +09:00
Jonathan Challinger 6565d83e73 InertialNav: Fixed signs, remove body-frame rotation, apply correction at 100hz. 2013-01-22 18:37:45 +09:00
Andrew Tridgell 546ed19ffc HAL_PX4: improved efficiency of serial writes 
use buffer at a time writes when possible, and use O_NONBLOCKING to
avoid txspace()
 2013-01-22 10:50:26 +11:00
Andrew Tridgell 18cfd29f2f HAL_PX4: added a read buffer to the UART driver 
this lowers the average cost of reading bytes by a large amount, and
prevents the GPS driver from chewing lots of time.
 2013-01-22 10:34:04 +11:00
Andrew Tridgell db0bd86317 HAL_PX4: name the eeprom file after the sketch 
this makes it easier to switch between ArduPlane and ArduCopter
 2013-01-21 22:04:17 +11:00
Andrew Tridgell f60d657f72 AP_InertialSensor: added timer for accumulating samples for PX4 
this makes the driver much more tolerant of sketch timing errors
 2013-01-21 21:51:32 +11:00
Andrew Tridgell 3d0cb755d2 AP_InertialSensor: user a timer to drive data collection on PX4 
this reduces the chance of missing a sample if the main sketch is a
bit slow
 2013-01-21 19:44:01 +11:00
Andrew Tridgell b9b3ef91a1 AP_Baro: added timer to PX4 driver 
this gives us more samples when main sketch is reading slowly
 2013-01-21 18:20:05 +11:00
Andrew Tridgell 1188c9e335 HAL_PX4: added Util instance 
this fixes hal.util->vsnprintf_P()
 2013-01-21 17:10:42 +11:00
Andrew Tridgell 52f560a4c2 HAL_PX4: enabled AnalogIn driver 2013-01-21 13:56:57 +11:00
Andrew Tridgell ed94292c25 HAL_PX4: start adc driver in rc.APM 2013-01-21 13:55:58 +11:00
Andrew Tridgell e42cf918fd HAL_PX4: added AnalogIn driver 
this allows airspeed to work on a PX4
 2013-01-21 13:55:06 +11:00
Andrew Tridgell 39e28d48c2 HAL_PX4: switched scheduler to use a pthread 
this allows the timer tasks to access file descriptors in the main APM
task, which makes writing PX4 device drivers much easier
 2013-01-21 13:54:09 +11:00
Andrew Tridgell ffb2924dd4 HAL_PX4: added APM startup script 2013-01-21 08:27:02 +11:00
Andrew Tridgell 6a5421a361 AP_Baro: ask for maximum poll rate for PX4 2013-01-21 08:27:02 +11:00
Andrew Tridgell 74f7b0f218 AP_Baro: added accumulate method to PX4 driver, and fixed scaling 2013-01-20 22:13:21 +11:00
Andrew Tridgell 0655b1a925 HAL_PX4: fixed thread_running on failed startup 2013-01-20 22:13:20 +11:00
Andrew Tridgell 16d72ca160 AP_InertialSensor: update PX4 driver to use read() method 2013-01-20 22:13:20 +11:00
Andrew Tridgell 6119201307 AP_AHRS: ensure compass is non-NULL for set_board_orientation() 2013-01-17 17:23:34 +11:00
Andrew Tridgell 7294d9ef35 AP_Menu: fixed build with older compilers 
avoids relocation truncated to fit error
 2013-01-17 07:26:26 +11:00
Andrew Tridgell 76092eb590 AP_HAL: remove unused peek() interface from UART drivers 
this is a bit tricky to implement on some platforms, and is unused
anyway
 2013-01-16 14:43:18 +11:00
Andrew Tridgell e852d6300f AP_HAL_AVR: fixed multi-channel RC output 2013-01-16 14:21:55 +11:00
James Bielman 4fa7bb1486 Add AVR compatibility header for missing math.h definitions. 
- Define float versions of math functions to the double versions
  on AVR (eg. #define sinf sin).
- These macros appear to be missing in older versions of avr-libs.
- Include AP_Math.h rather than math.h to get these definitions.
 2013-01-16 13:52:17 +11:00
James Bielman 5631f865b2 Update floating point calculations to use floats instead of doubles. 
- Allows use of hardware floating point on the Cortex-M4.
- Added "f" suffix to floating point literals.
- Call floating point versions of stdlib math functions.
 2013-01-16 13:52:01 +11:00
Andrew Tridgell d00b06d449 Filter: added a butter filter to example 2013-01-16 09:15:35 +11:00
Andrew Tridgell befc6b7b9b Filter: fixed butter filter build on px4 2013-01-16 09:15:22 +11:00
Andrew Tridgell 2ce18f588b AP_HAL: added AP_HAL_Macros.h 
this adds a define for constexpr, allowing code to build either with
or without -std=gnu++0x
 2013-01-16 09:12:55 +11:00
Pat Hickey 53ea7c564e Butter filter: needs header guards 2013-01-15 12:47:43 -08:00
Jonathan Challinger c66571b87d Filter: added 2nd-order butterworth filters. 2013-01-14 19:18:47 -08:00