Commit Graph

17 Commits

Author SHA1 Message Date
Olivier ADLER f7d5c372b9 ArduPPM : Redundancy mode
#define modifications for sync symbol detection and center pwm value correction
2012-10-29 22:22:48 +01:00
Olivier ADLER c750abfbf2 ArduPPM : Redundancy mode
Switchover : wait for end of PPM frame before switching
2012-10-28 01:33:23 +02:00
Olivier ADLER 7618c082c3 ArduPPM: Redundancy mode
Fixed logic problem in the decoder (PPM channel increment)
2012-10-27 23:41:08 +02:00
Olivier ADLER e0393e541c ArduPPM: redundancy mode
Channel count auto detection post processing code
Added a #define : valid frames threshold before detection validation
2012-10-21 23:46:16 +02:00
Olivier ADLER 0b171178b5 ArduPPM: Redundancy mode
Reworked the PPM decoder (i did forget the sync symbol pre-pulse)
Splitted pre-pulse and pulse width variable for better reliability and easier processing
2012-10-17 16:28:05 +02:00
Olivier ADLER 3784f326e8 ArduPPM: Redundancy mode
Base algorithm added for channel count auto detection in the decoder himself.
Replaced the #define for PPM_CHx_CHANNELS by PPM_CHx_MAX_CHANNELS.
Channel count #define was not needed anymore thanks to the channel count auto detection.
Channel detection post processing to do.
2012-10-15 22:49:01 +02:00
Olivier ADLER f84a12a5cb ArduPPM: Redundancy mode switchover algorithm
Auto Switchover algorithm with primary receiver switchback.
Force switchover channel moved to channel 9
Manual modifications.
2012-10-14 23:58:00 +02:00
Olivier ADLER 6558731cff ArduPPM: Redundancy mode
Dual input PPM decoder rework
flags for frame and channel error control
decoder algorithm rework
2012-10-14 01:10:52 +02:00
Olivier ADLER 1ce9e5107f ArduPPM: Redundancy mode
Work in progress
adding a channel pre pulse lengt #define for each PPM mode
dual channels PPM input capture interrupt algorithm
2012-10-13 14:59:03 +02:00
Olivier ADLER e22a01682e ArduPPM: PPM Redundancy mode
Some rework and cleaning for #define stuff
2012-10-12 19:08:19 +02:00
Olivier ADLER 5e65e5ef8a ArduPPM : Redundancy mode
Work in progress on a new Redundancy dual PPM sum mode for PPM encoder.

- New library PPM_Encoder_v3.h and new manual manual_v3.txt

- New format conversion capability between input and output PPM frame timings and channel count.

This will be experimental until heavily tested. The main goal is to allow the use of low cost satellite receivers in a high safety setup, and allow a new teacher / student RC mode without link between the two pilot transmitters.
2012-10-12 14:32:14 +02:00
John Arne Birkeland f4a4982328 ArduPPM V2.2.68 - Fixed possible logic flaw in throttle failsafe reset if _JITTER_FILTER_ is enabled 2012-06-04 22:55:15 +02:00
John Arne Birkeland eb84554d26 V2.2.67 - Implemented detection and failsafe (throttle = 900us) for missing throttle signal. 2012-06-03 02:42:39 +02:00
John Arne Birkeland 844e1c9695 ArduPPM V2.2.66
- Added APM2 (ATmega32U2) support for using TX and RX status leds to indicate PWM and PPM traffic

<RX><OFF> no pwm input detected
<RX><TOGGLE> speed of toggle indicate how many channels are active
<RX><ON> input lost (failsafe)
<TX><OFF> ppm output not started
<TX><FAST TOGGLE> normal PWM->PPM output or PPM passtrough failsafe
<TX><SLOW TOGGLE> PPM passtrough
2012-03-16 20:48:55 +01:00
Andrew Tridgell aab512636e ArduPPM: let the 2560 know when the USB is connected
this sets pin 23 on the 2560 according to whether the USB cable is
connected or not
2011-11-20 19:06:24 +11:00
Olivier ADLER 6cd90471d1 ArduPPM : modified library path 2011-10-01 16:18:39 +02:00
John Arne Birkeland 893a0cca5a ArduPPM: New and improved PPM encoder firmware for APM 1.x boards with ATmega328p and new ones using ATMega32U2. 2011-10-01 00:12:22 +02:00