Commit Graph

6011 Commits

Author SHA1 Message Date
rmackay9 8be1f9d9b8 ArduCopter: code clean-up. Changed update_nav_wp to use a switch statement and relocated to navigation.pde 2012-12-09 15:24:19 +09:00
rmackay9 618bd1c296 ArduCopter: allow alt hold to be engaged with alt < 1m because sometimes we get baro drift.
Also initialisation of target altitude is done in set_throttle_mode function.
2012-12-09 14:48:01 +09:00
rmackay9 a4ee5d2c81 ArduCopter, AP_InertialSensor: restore mpu6k sample rate to 200hz but keep default filtering at 42hz. 2012-12-09 14:27:33 +09:00
Robert Lefebvre 39013a33bc ACM: Adding Pre-Compiler Define for Stabilize Throttle Mode. 2012-12-08 20:41:05 -05:00
Robert Lefebvre 083c451ec6 ACM: TradHeli
Fix to make update_throttle_cruise work with stab_throttle scaling.
2012-12-08 15:12:39 -05:00
Robert Lefebvre c6537ae6e3 ACM: Code Cleanup 2012-12-08 14:49:38 -05:00
rmackay9 90f9b8c076 ArduCopter: remove debug related to yaw mode used for alt hold 2012-12-08 14:24:50 +09:00
rmackay9 f62c377062 ArduCopter: auto yaw changes to allow pilot override of yaw during missions
Added set_yaw_mode to better control of yaw controller changes and variable initialisation.
Replaced AUTO_YAW mode with separate yaw controllers YAW_LOOK_AT_NEXT_WP, YAW_LOOK_AT_LOCATION, YAW_LOOK_AT_HEADING.
Pilot manual override of yaw causes yaw to change to YAW_HOLD (i.e. manual yaw) until next waypoint is reached.
Added get_yaw_slew function to control how quickly autopilot turns copter
Changed YAW_LOOK_AHEAD to use GPS heading and moved to new get_look_ahead_yaw function in Attitude.pde
Renamed variables: target_bearing->wp_bearing, original_target_bearing->original_wp_bearing.
Removed auto_yaw_tracking and auto_yaw variables and update_auto_yaw function as they are no longer needed.
Simplified MAV_CMD_CONDITION_YAW handling (do_yaw).  We lose ability to control direction of turn and ability to do long panorama shots but it now works between waypoints and save 20bytes.
2012-12-08 14:23:32 +09:00
rmackay9 6596f1728a ArduCopter: removed unused and out-of-date #defines from APM_Config.h 2012-12-08 13:38:39 +09:00
Michael Oborne 1b56a10b9a Mission Planner 1.2.26
move mavlink structure/currentstate around for future mods
update old firmware git hashs
mod some error descriptions
AP_mount camera trigger mod
modify raw param display with units/range/desc
add radio support for 868mhz
update ch7 options
updated dataflashlog format
small df log parser mod for bad gps loc
renable menu to always dock. right click for autohide
2012-12-07 17:19:46 +08:00
rmackay9 b973d50d79 ArduCopter: remove some unused #defines 2012-12-07 15:17:35 +09:00
rmackay9 63a9913278 ArduCopter: InertialNav time constant CH6 tuning changed to only update enabled axis 2012-12-07 13:01:40 +09:00
rmackay9 8378de6d8c ArduCopter: do_set_servo fix to resolve -1 being assigned to uint8_t 2012-12-07 12:58:44 +09:00
rmackay9 47af1fd255 AP_InertialNav: increase Z axis default time constant to 3.0 (was 1.5) 2012-12-07 12:57:12 +09:00
rmackay9 5c3ca64c12 ArduCopter: add dataflash logging of camera events 2012-12-07 00:57:08 +09:00
rmackay9 2cff551891 ArduCopter: allow triggering of camera from a mission 2012-12-06 23:48:30 +09:00
rmackay9 bfb033c52b ArduCopter: fix do_set_servo so that it works again 2012-12-06 20:18:33 +09:00
rmackay9 80d9c76009 ArduCopter: added CH7 option to trigger camera
Restructured reading of channel 7 into a switch statement.
2012-12-06 17:47:01 +09:00
rmackay9 f4cd7b870b AP_Camera: add three new parameters DURATION, SERVO_ON and SERVO_OFF to allow better shutter control when using servo.
Removed unused variables to save 4 bytes.
Renamed some variables and functions to make more consistent with existing code base.
2012-12-06 17:46:09 +09:00
rmackay9 8ab535f75f RC_Channel_aux: immediately send output to servos when set_radio, set_radio_to_min, set_radio_to_max, set_radio_to_trim or set_servo_out functions are called. 2012-12-06 17:41:42 +09:00
rmackay9 73b7d1deca ArduCopter: update comments related to CH7 switch options 2012-12-06 17:40:36 +09:00
rmackay9 e1a351552f ArduCopter: maintain loiter control even below 1m while landing 2012-12-06 12:40:53 +09:00
rmackay9 c734a42e15 ArduCopter: adjusted pid_throttle_accel dt to 0.01 (100hz) 2012-12-06 10:32:12 +09:00
rmackay9 9c0984c505 ArduCopter: bug fix - initialise inertial nav 2012-12-06 10:32:07 +09:00
rmackay9 5551f092be ArduCopter: disable INERTIAL_NAV_XY by default 2012-12-06 10:32:02 +09:00
rmackay9 bdf236ef38 ArduCopter: allow accel based throttle controller to be enabled/disabled with the new THR_ACC_ENABLE parameter.
When disabled the original velocity based throttle controller is used.
2012-12-06 10:31:57 +09:00
rmackay9 9750c14325 ArduCopter: RTL clean-up and slightly improved landing sensor
Consolidated RTL state to be captured by rtl_state variable.
Combined update_RTL_Nav and verify_RTL functions which performed the same function but one was for missions, the other for the RTL flight mode.
Renamed some RTL parameters and global variables to have RTL at the front.
Landing detector now checks accel-throttle's I term and/or a very low throttle value
2012-12-06 10:31:52 +09:00
rmackay9 9447d08fdd ArduCopter: increase CONTROL_SWITCH_COUNTER so that flight mode switch must be changed for at least 1/10th of a second 2012-12-06 10:31:46 +09:00
rmackay9 eb3ad15843 ArduCopter: allow INERTIAL_NAV to be enabled separately for horizontal and vertical position 2012-12-06 10:31:41 +09:00
rmackay9 450b6e13a4 ArduCopter: switch on INS in APM_Config.h (i.e. on by default for users uploading through Arduino IDE) 2012-12-06 10:31:36 +09:00
rmackay9 8a0faebb21 ArduCopter: pass linear altitude error to throttle rate controllers.
Previously the requested rate used the square root of the altitude error.

Scale pilot's desired vertical rate and acceleration based on ACCELERATION_MAX_Z and VELOCITY_MAX_Z #defines
2012-12-06 10:31:31 +09:00
rmackay9 89e737728c ArduCopter: add tuning of throttle rate controller's I term (THROTTLE_KI) 2012-12-06 10:31:25 +09:00
rmackay9 dc0b35da30 ArduCopter: restored landing detector to landing throttle mode.
Added LAND_SPEED parameter to control the rate of descent for the last 10m of a landing.
Added CH6 tuning for accel based throttle controller.
2012-12-06 10:31:20 +09:00
rmackay9 b26f2861ff ArduCopter: removed unused AUTO_THROTTLE_HOLD #define 2012-12-06 10:31:15 +09:00
rmackay9 ea9f357dc0 ArduCopter: remove unused get_desired_climb_rate function 2012-12-06 10:31:09 +09:00
rmackay9 e629fe2eb0 ArduCopter: add set_throttle_mode to better control initialisation of variables 2012-12-06 10:31:04 +09:00
rmackay9 1285198b71 ArduCopter: added back in angle boost and recombined for heli and multicopter 2012-12-06 10:30:55 +09:00
rmackay9 c1ce0ae752 ArduCopter: first merge of leonard's accel based altitude controller plus other changes from Randy
Changes include:
New low-level get_throttle_accel function takes target acceleration and compares vs earth-frame Z accelerometer values to produce output to motors.
Higher level throttle controllers modified to call new get_throttle_accel controller
Throttle_rate_stabilized controller added which maintains a desired climb/descent rate
Throttle_land controller added - descends using normal auto throttle controller to 10m then descends at 50cm/s
Multiple throttle modes added including landing mode
Land flight mode no longer needs GPS
Throttle cruise maintenance moved to update_throttle_cruise function
2012-12-06 10:30:49 +09:00
rmackay9 a83f6e54b5 ThirdOrderCompFilter: remove last_time_constant_xy and _z static variables to save 8 bytes. 2012-12-06 10:24:58 +09:00
rmackay9 12e1ce50e2 AP_Buffer: bug fix to allow buffer to completely fill up.
Also removed redundant _tail parameter which saves 1 byte.
2012-12-06 10:18:00 +09:00
rmackay9 0092960a68 AP_InertialSensor: add comments to give credit for accel calibration method to Rolfe Schmidt 2012-12-05 09:35:55 +09:00
rmackay9 399fe2e8cd AP_InertialSensor: add comments to give credit for accel calibration method to Rolfe Schmidt 2012-12-05 09:20:31 +09:00
Robert Lefebvre e86243e7a3 ACM: TradHeli
Fix for Rotor Speed Controller to switch on/off with Ch8 as opposed to the old way (throttle).
2012-12-04 15:09:27 -05:00
Robert Lefebvre 6f8958289f ACM: Small fix to Yaw Look Ahead 2012-12-04 14:50:14 -05:00
Robert Lefebvre 5863c737a1 ACM: TradHeli
Fixes for Attitude rate controllers.
2012-12-04 14:42:04 -05:00
Robert Lefebvre b225bc8cb8 ACM: TradHeli
Creating Rate Feed-Forward Parameters
2012-12-04 13:47:38 -05:00
Robert Lefebvre 45e6e2bc9a ACM: TradHeli APM_Config.h changes 2012-12-04 13:32:40 -05:00
Robert Lefebvre fdcf966df7 ACM: Yaw Look Ahead Changes 2012-12-04 13:26:41 -05:00
Michael Oborne 75630e8488 firmware build 2012-12-04 08:52:48 +08:00
Andrew Tridgell d76288529b Plane: fixed spelling error 2012-12-04 11:38:29 +11:00