Commit Graph

4508 Commits

Author SHA1 Message Date
Andrew Tridgell 8b7fc364f9 autotest: change loiter heading accuracy to 10 2012-07-04 15:59:35 +10:00
Andrew Tridgell b3c9cdb353 SITL: fixed the normalisation of the DCM matrix in the multicopter sim 2012-07-04 15:59:15 +10:00
Andrew Tridgell 6cf2e2fa13 AP_Math: cope with co-located waypoints in location_passed_point() 2012-07-04 14:24:04 +10:00
Andrew Tridgell 7be29c8b04 AP_Math: the windows arduino build is missing acosf() 2012-07-04 14:14:58 +10:00
Andrew Tridgell 8fa1acb141 AP_Math: add include of math.h
this is needed for location.cpp
2012-07-04 13:59:23 +10:00
Andrew Tridgell 35b73b9d01 ACM: removed some Location functions which are now in AP_Math 2012-07-04 13:44:36 +10:00
Andrew Tridgell 597170afdc DataFlash: fixed SITL build 2012-07-04 13:44:01 +10:00
Andrew Tridgell c6ff292721 DataFlash: fallback to BlockErase if ChipErase fails
The errata on the APM2 dataflash chip says that ChipErase may not work
on some chips
2012-07-04 12:42:46 +10:00
Andrew Tridgell 5623ef99a0 APM: changed test for having completed a waypoint
the new test is that we have passed a "finish line" perpendicular to
the track between the last waypoint and the current waypoint.

The previous tests are also still used, so if we circle a waypoint or
get within the waypoint radius we also consider it completed
2012-07-04 12:42:46 +10:00
Andrew Tridgell d9351ff681 APM: use new location functions 2012-07-04 12:42:46 +10:00
Andrew Tridgell 84a489498d Math: added location functions to math library
these do common calculations on struct Location
2012-07-04 12:42:46 +10:00
Andrew Tridgell e0685f4408 AHRS: make P gain on PI roll/pitch controller tunable
this is to make it easier for Craig and Alan to tune
2012-07-04 12:42:46 +10:00
Jason Short cc51d497c6 commands
fixed logic bug to make a copter loiter after the mission is ended.
2012-07-03 17:38:50 -07:00
Jason Short a143e7bef6 Config.h:
decreased alt hold_P to .4
removed RTL_AUTO_LAND default
increased alt hold I
2012-07-03 17:37:37 -07:00
Jason Short fcc38889b4 Navigation
increased speed governor to get faster WP travel
added param for WP tilt - basically a precalculated I term for wind resistance.
2012-07-03 17:34:50 -07:00
Jason Short 69fe7feb54 Params
Added Tilt_Compensation to Params,
deprecated RTL_Land_Enabeled
RTL_Approach_alt is not int16_t, -1 means do noting. 0 means land, >1 means hover to that altitude after timeout.
2012-07-03 17:33:03 -07:00
Jason Short 207497a840 Arducopter.pde:
Added note about -1 to disable feature
Set RTL_Atl by default after reaching home in case we're at the wrong alt.
increased speed of Yaw rotation for WPs
2012-07-03 17:21:46 -07:00
Jason Short 8a2df85ee8 commands_logic: Removed some old unused code 2012-07-03 17:19:19 -07:00
Jason Short 4a2e9b692d Config: increased WP distance to 2m but default, removed alt hold D: causing issues with APM1 noise. 2012-07-03 17:18:33 -07:00
Jason Short 2bc77c1020 Log.pde: formatting 2012-07-03 17:16:26 -07:00
Jason Short c20c04ed24 removed GPS ground speed calc - was causing some funny business during the transition. 2012-07-03 17:16:14 -07:00
Jason Short b2d932136a Toy Mode: Yaw performance update. 2012-07-03 17:14:54 -07:00
Jason Short 50d1ff56c5 Config.h : shortening the landing time to 10s 2012-07-02 17:52:38 -07:00
Jason Short 88428743b2 Toy Mode: removed virtual WP, copter now just goes into auto_loiter when not holding the sticks. 2012-07-02 17:52:38 -07:00
Andrew Tridgell 1142ec0665 AP_Mount: removed unused enum 2012-07-03 10:39:34 +10:00
Andrew Tridgell f150c645c8 Mount: enable mount control via eeprom parameters
this enables MNT_* parameter control of the camera mount code. It also
fixes the conversion of calculated angles between degrees and
integers, and fixes stabilised mount control when yaw control is not
available.
2012-07-03 10:21:01 +10:00
Andrew Tridgell e54e3f813d SITL: don't enable wind until we are off the ground
this makes it possible to test with much larger wind speeds, without
the sim crashing due to the wind flipping us over on the runway
2012-07-03 10:19:20 +10:00
Andrew Tridgell 7a77832f45 Baro: average over all pressure/temperature samples on MS5611
this allows us to use the MS5611 barometer at its full 100Hz sample
rate (80Hz for pressure, 20Hz for temperature). The pressure and
temperature values are averaged between reads without adding any
latency. Previously the driver would throw away values between
readings

This also fixes a race condition in reading from the SPI bus that
could lead to bad values from the barometer
2012-07-02 13:44:53 +10:00
Andrew Tridgell f7b06e0a64 Baro: fixed build of MS5611 test code 2012-07-02 13:44:53 +10:00
Jason Short 0aabd4efe2 Yaw mode:
Improved hybrid Yaw mode:
- uses rate controller rather than as fast as possible
- waits 1.5 seconds before entering hold
- bounce free
2012-07-01 13:40:12 -07:00
Jason Short bea1ab8810 System.pde - RTL
removed Approach mode, fixed RTL to loiter until desired altitude is reached
2012-07-01 13:40:12 -07:00
Jason Short 44e12c6d2d Parameters
removed unused parameters for retro loiter
2012-07-01 13:40:12 -07:00
Jason Short 42a321b76c GCS_Mavlink.pde
removed Approach define
2012-07-01 13:40:11 -07:00
Jason Short 95e1f05f82 defines.h
removed Approach mode enumeration
2012-07-01 13:40:11 -07:00
Jason Short 3fb268da96 read_control_switch
Removed Prev_WP reference. unneeded.
2012-07-01 13:40:11 -07:00
Jason Short 99d6a45948 Config.h
Removed Approach delay redundancy - using land timer instead
Removed Retro loiter mode param
2012-07-01 13:40:11 -07:00
Jason Short 059fea36aa RTL: Commands.pde
When we are out of commands we land or Loiter at the RTL_Approach_altitude.
2012-07-01 13:40:11 -07:00
Jason Short 9cd9dd168e RTL: Commands.pde
Removed do_approach function - now redundant
2012-07-01 13:40:11 -07:00
Jason Short e5fbcb629d Arducopter.pde_RTL:
added a new RTL function that goes into Loiter, first, checks if we have reached RTL_Altitude, then enters WP mode to come home.
Removes Approach mode. Uses Auto_Approach value to decide if we should land or descend to a certain altitude
2012-07-01 13:40:11 -07:00
Jason Short 8c8f44e6f7 Arducopter: enabled RTL_altitude, renamed function to be more accurate 2012-07-01 13:40:11 -07:00
Jason Short b199fb22a2 Added code for self centering throttle - disabled by default. 2012-07-01 13:40:11 -07:00
Michael Oborne 84d2782c33 fixup sitl attribute group for planner. - causing invalid advanced/standard views 2012-07-01 21:43:32 +08:00
Michael Oborne dad36d2e42 APM Planner 1.1.95
fix config panel value change detection
add loiter_ to AC config screen
Add praram name to Friendly param, and exception ignoring.
fix param file note line
intergrate andrews gimbal config.
fix any possible log appending issues
remove old cli planner on connect
modify speech to not crash on windows mono
2012-07-01 17:51:22 +08:00
Andrew Tridgell 0313d106a0 ArduBoat: removed use of analogRead() 2012-07-01 15:09:39 +10:00
Andrew Tridgell 2bd5cd3b9a AnalogSource: added some example code 2012-07-01 15:01:05 +10:00
Andrew Tridgell 0341e0e5f0 SITL: added support for new analog source
removed analogRead() to prevent people using it
2012-07-01 15:01:05 +10:00
Andrew Tridgell e791cad9ef AnalogSource: convert analogRead() calls to the new API
this should give us much better analog values, plus save a bunch of
CPU time
2012-07-01 15:01:05 +10:00
Andrew Tridgell 2046e396a2 AnalogSource: make the Arduino AnalogSource interrupt driven
this fixes several problems with reading analog sources:

 - we were getting poor values because we didn't wait long enough for
   an analog source to settle

 - we wasted a lot of CPU cycles waiting for conversions

 - we were not taking averages over many samples, which we did with
   the old AP_ADC driver on the APM1
2012-07-01 15:01:05 +10:00
rmackay9 9624f8c179 ArduCopter: updated STABILIZE_ROLL_I to 0.01 (was 0.1) as instructed by Marco 2012-06-30 19:26:14 +09:00
Jason Short 60cdbe771c Circle_WP distance check fix 2012-06-29 21:20:28 -07:00