8b5731fcad
make the Xbee anti-brick delay configurabe
...
and change default to 2s
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3269 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-09-05 05:12:13 +00:00
47c3be156b
removed unused variables, functions,
...
moved camera to 10hz loop
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3268 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-09-05 05:09:07 +00:00
2e3ae1a30e
Changed bit shifts to division, relying on the compiler.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3265 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-09-05 04:32:17 +00:00
135dfd1fd4
2.0.40 -
...
added separate reset for rate based nav. This allows Wind and throttle Iterms to avoid being cleared when moving between nav modes.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3257 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-09-05 01:30:31 +00:00
453c474481
fixed crosstrack return value when disabled
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3256 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-09-05 01:16:02 +00:00
9516b97ab9
fixed uninitialised variables
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3255 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-09-05 01:15:55 +00:00
fc0c75963b
renamed ACM_PI to APM_PI to fix build
...
the library name needs to match the header name for the arduino build
to work
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3254 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-09-05 01:15:24 +00:00
2ebcc08b06
Adding ACM_PI
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3253 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-09-05 00:56:50 +00:00
0cdc3d85ad
2.0.40
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3252 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-09-05 00:15:36 +00:00
5b30a58491
added MAVLink message queueing
...
this ensures we never block while writing a MAVLink message to a
serial port, by checking the number of available bytes in the serial
transmit buffer and deferring any message that would cause a blocking
write.
This should prevent the main loop from clagging up due to excessive
telemetry data being sent
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3251 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-09-04 23:56:26 +00:00
9169fff986
let the user know that EEPROM is being erased
...
it takes about 10-12 seconds, so its nice to know whats going on
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3250 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-09-04 23:56:19 +00:00
48c99c400a
fixed some compiler warnings
...
the junk variables are not needed
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3249 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-09-04 23:56:11 +00:00
f2ea0b4fd8
BetterSerial has txspace() now
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3248 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-09-04 22:52:22 +00:00
6cfb9a9c2b
replace space() with txspace()
...
space() was actually intended to be tx buffer space, it just had a
bug. The name txspace() is clearer however, and should prevent
confusion as to which buffer its for
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3247 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-09-04 22:52:11 +00:00
2dde50366f
added comm_get_txspace() to GCS_MAVLink
...
this gives us the number of bytes available in the transmit buffer for
a mavlink channel
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3246 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-09-04 21:23:24 +00:00
85a8d1b5c5
added txspace() method to FastSerial
...
this returns the number of bytes available in the transmit buffer
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3245 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-09-04 21:23:15 +00:00
e7b71b3cb6
fixed spelling
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3244 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-09-04 21:23:06 +00:00
58e9a913a1
Added two filters to the RawTemp and RawPress values to increase accuracy from noisy temp sensor.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3242 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-09-04 17:47:50 +00:00
5f8ac1d269
Reverted to older PID. Restored the older filter, and removed PI command. I am no longer using PID for the quad and have switched to PIPI loops which perform much better. The D term in this class is not that great.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3241 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-09-04 17:47:07 +00:00
b8538ed5fb
shrink the size of mavlink_message_t using max dialect message size
...
this makes mavlink_message_t much smaller, but setting
MAVLINK_MAX_PAYLOAD_LEN to the maximum message size in this
dialect. This saves us 320 bytes of memory
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3239 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-09-04 08:51:51 +00:00
d5821bb54f
import new mavlink version
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3238 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-09-04 08:50:24 +00:00
ada9c36e0c
AP_RangeFinder - removed LV version because we use XL which covers both types of sonars
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3237 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-09-04 06:55:58 +00:00
88c2f56617
ACM - removed references to MaxSonar LV sonar
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3236 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-09-04 06:53:40 +00:00
2553b1a90f
increase firmware version
...
this avoids problems with previously corrupted EEPROMs
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3235 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-09-04 06:42:36 +00:00
a2589c3573
AP_Var: added EEPROM wear levelling
...
This adds a variable length dummy variable at the front of the EEPROM
when we erase it, which has the effect of moving the location of any
hot variables within the EEPROM. This should improve EEPROM
life. Thanks to Mike for the implementation.
Pair-Programmed-With: Mike Smith
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3234 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-09-04 06:39:57 +00:00
3255503032
AP_Var: avoid wearing out EEPROM by re-writing the same value
...
when saving a variable, this avoids EEPROM wear by checking if the
existing value is already the same as the value being written, and
avoiding the write.
Thanks to Mike Smith for the implementation
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3233 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-09-04 06:39:49 +00:00
cb4c53eddd
AP_Var: fixed a logic bug in APVar::key()
...
We were using && instead of & for a bit check. Thanks to Mike for
spotting this!
Pair-Programmed-With: Mike Smith
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3232 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-09-04 06:39:40 +00:00
442e7ddc49
AP_Var: fill all of EEPROM with 0xFF on erase_all()
...
This wipes all parameter values, and also clears out any waypoints as
the waypoint format could have changed between firmware revisions.
This also ensures that the AP_Var code can't re-use any key values
from the old EEPROM state, which makes us less dependent on the old
EEPROM being in a good state
Pair-Programmed-With: Mike Smith
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3231 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-09-04 06:39:28 +00:00
7ac3544573
dataflash: fixed some compiler warnings
...
tmp is not needed
Pair-Programmed-With: Mike Smith
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3230 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-09-04 06:39:14 +00:00
2cbb662e1f
Fix NMEA GPS error
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3227 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-09-04 05:14:42 +00:00
86bc84c259
update "NO_GPS" issue as per Justin Beech
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3225 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-09-04 04:46:14 +00:00
635d4418c8
added memory reporting over MAVLink
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3207 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-09-01 00:52:08 +00:00
5cac97ca8d
added memcheck library
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3206 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-09-01 00:50:31 +00:00
bba6b90104
mavlink: imported new version with MEMINFO message
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3205 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-09-01 00:50:13 +00:00
ec5e25687e
remove MAVLINK_COMM_NUM_BUFFERS
...
this is in GCS_MAVLink.h now
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3201 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-31 05:26:07 +00:00
ca8141cfb6
imported new MAVLink implementation
...
this new implementation reduces code size, and also reduces stack
usage, while avoiding the gcc union stack bug
Note that we will gain even more when we move to the new protocol
version, especially in terms of code size
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3200 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-31 05:23:18 +00:00
1807cd8938
Correct the spelling of Michael O's name ;-)
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3197 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-30 20:14:29 +00:00
9f7631dc0f
Fixed debug command.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3196 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-30 17:33:51 +00:00
c6a5c4792b
TradHeli - updated mounting plate files and added sonar mount
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3178 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-27 03:35:45 +00:00
0a2a64c848
we should not be calling mavlink_delay() in the CLI
...
(this reverts svn 3050 from Jason)
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3167 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-24 08:17:36 +00:00
725ccbc109
update to arduino.mk file to allow easier use with cygwin.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3166 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-23 23:02:39 +00:00
9e36c13f9c
nightly check in, version not stable.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3164 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-23 20:36:30 +00:00
cce5ad68bd
version increment
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3157 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-23 06:27:51 +00:00
3206ea2312
mavlink: don't execute action commands in mavlink_delay()
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3156 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-23 06:16:37 +00:00
a545c94b2c
Level fix.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3155 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-23 05:52:45 +00:00
c140113583
Checkin before beddy byes
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3154 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-22 21:50:11 +00:00
f92e7323f5
Amilcar Lucas & Ritchie Wilson's camera code mixed in with ap_mount code, this needs to be separated.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3145 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-21 21:14:02 +00:00
2048d132b0
change of mind payloads should be split into their separate folders.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3144 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-21 19:58:15 +00:00
8c020108cb
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3143 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-21 19:55:54 +00:00
764619f6e7
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3142 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-21 19:33:32 +00:00
tridge60@gmail.com
jasonshort
rmackay9@yahoo.com
hazyhxj@gmail.com
mich146@hotmail.com
analoguedevices@gmail.com
james.goppert
joeholdsworth@gmail.com