Peter Barker
8a478abce9
RC_Channel: allow customisation of position text in aux switch announcement
...
this means that we get "EKFPosSource 1" rather than "EKFPosSource LOW"
2024-03-05 23:46:03 +11:00
Pulak Gautam
2d5e6a5f98
AP_ExternalAHRS: added missing #if AHRS logging
2024-03-05 17:11:38 +11:00
Peter Barker
b09dd7b866
AP_HAL_ChibiOS: move defaulting of HAL_WITH_ESC_TELEM for periph
2024-03-05 12:37:40 +11:00
Peter Barker
d0a7b54e61
AP_ESC_Telem: move defaulting of HAL_WITH_ESC_TELEM for periph
2024-03-05 12:37:40 +11:00
bnsgeyer
d103eebf91
AC_AttitudeControl: Tradheli- fix inverted mode collective handling
2024-03-05 10:24:06 +09:00
Iampete1
576ee75669
AC_AttitudeControl: Heli: invert throttle in inverted flight, move state down to heli
2024-03-05 10:24:06 +09:00
Iampete1
24c843dc26
AP_Motors: Heli: remove inverted flight state
2024-03-05 10:24:06 +09:00
Iampete1
1bf7792fe5
AP_Motors: Heli: remove `output_armed_zero_throttle` and use identical `output_armed_stabilizing`
2024-03-05 10:20:03 +09:00
subashchandar
7db7f95a3b
AP_HAL_ChibiOS: hwdef: Add new hardware pixflamingo f7
2024-03-04 23:26:50 +00:00
Andrew Tridgell
eadf5596ed
AP_TECS: fixed adjusting speed without airspeed sensor
...
the pitch trim variable that was not connected in aparm is needed to
allow tuning of the flight speed using PTCH_TRIM_DEG and
TRIM_THROTTLE.
This was broken in 4.4.x by this PR:
https://github.com/ArduPilot/ardupilot/pull/22191
2024-03-03 20:28:38 +11:00
Peter Barker
d6df142eaa
GCS_MAVLink: allow FTP to be compiled out with build_options.py
2024-03-03 08:38:22 +11:00
Peter Barker
bff8688ac9
AP_Vehicle: add and use AP_CUSTOMROTATIONS_ENABLED
...
also add to build_options.py
2024-03-03 08:22:46 +11:00
Peter Barker
cf9c85d295
AP_Math: add and use AP_CUSTOMROTATIONS_ENABLED
...
also add to build_options.py
2024-03-03 08:22:46 +11:00
Peter Barker
077dd82bdc
AP_HAL_ChibiOS: add and use AP_CUSTOMROTATIONS_ENABLED
...
also add to build_options.py
2024-03-03 08:22:46 +11:00
Peter Barker
2f30fa2f56
AP_CustomRotations: add and use AP_CUSTOMROTATIONS_ENABLED
...
also add to build_options.py
2024-03-03 08:22:46 +11:00
Peter Barker
093deed610
AP_Compass: add and use AP_CUSTOMROTATIONS_ENABLED
...
also add to build_options.py
2024-03-03 08:22:46 +11:00
Peter Barker
a836bd8583
AP_AHRS: add and use AP_CUSTOMROTATIONS_ENABLED
...
also add to build_options.py
2024-03-03 08:22:46 +11:00
David Buzz
73afd26465
AP_HAL_ESP32: bugfixes
...
bump tick rate to 1kz to match chibios
experimentally make delay_microseconds not delay, and only yield ( vTaskDelay yields to higher-priority tasks )
ESP32 disable all watchdogs
emit info to console to tell user where to connect tcp/udp and what ports
comment out bad code throwing a ptr error
2024-03-03 07:29:35 +11:00
astik
24de88f85c
AP_DDS: Add IMU publisher
...
* Using NED frame
2024-03-03 07:04:59 +11:00
Andrew Tridgell
b4d8e1133c
AP_HAL: use NoVehicle by default
...
allows build of examples for esp32s3empty
2024-03-02 17:55:43 +11:00
Peter Barker
3926e06508
AC_CustomControl: move include of logging header to cpp file
2024-02-29 20:01:39 +11:00
Peter Barker
d0cc35af3e
AR_PosControl: adjust for logging having moved into AC_AttitudeControl
2024-02-29 19:27:47 +11:00
Peter Barker
8ce6964948
AC_AttitudeControl: make logging methods public/static so Blimp can use them
2024-02-29 19:27:47 +11:00
Peter Barker
f4df89b85b
AP_Logger: move logging of PSC messages into AC_AttitudeControl
2024-02-29 19:27:47 +11:00
Peter Barker
3165ec694c
AC_AttitudeControl: move logging of PSC messages into AC_AttitudeControl
2024-02-29 19:27:47 +11:00
Peter Barker
32abb5b0ad
AP_Vehicle: move serial_manager parameters up to base class
2024-02-29 12:12:19 +11:00
Peter Barker
b623b8ec94
AP_SerialManager: move serial_manager parameters up to base class
2024-02-29 12:12:19 +11:00
Peter Barker
684b621b8c
AP_Param: move serial_manager parameters up to base class
2024-02-29 12:12:19 +11:00
Peter Barker
c0a57cb447
AP_DDS: add missing include in externalcontrol
2024-02-29 12:12:00 +11:00
Andrew Tridgell
6a16cbf3bb
AP_HAL_SITL: fixed get_baud_rate()
2024-02-29 11:00:40 +11:00
Andrew Tridgell
cfad74ce6b
AP_HAL_Linux: fixed get_baud_rate()
2024-02-29 11:00:40 +11:00
Andrew Tridgell
673c89da9c
AP_HAL_ESP32: fixed get_baud_rate()
2024-02-29 11:00:40 +11:00
Andrew Tridgell
c2be9f3c56
AP_SerialManager: default GPS baud to 230400
...
this is the most common baudrate
2024-02-29 11:00:40 +11:00
Andrew Tridgell
d894f7ac5d
AP_GPS: do initial probe at default baudrate
...
this makes for much faster probe for most users
2024-02-29 11:00:40 +11:00
Peter Barker
6f4ab028ca
AP_Logger: cope with rename of AP_Logger_JEDEC driver
2024-02-28 22:32:23 +11:00
Peter Barker
8555a5ddbe
AP_Logger: rename AP_Logger_DataFlash to AP_Logger_Flash_JEDEC
2024-02-28 22:32:23 +11:00
Andy Piper
b248ba5f1b
AP_HAL_ChibiOS: provide start time and timeout to all dshot APIs that require it
...
correct timeout checking for dshot across timer wrap boundaries
fix trigger_groups timeout checks
use rcout_timer_t instead of uint32_t or uint64_t
2024-02-28 22:25:48 +11:00
Andy Piper
f094ee66ec
AP_HAL: add timeout helper functions
...
add tests for timeout functions
2024-02-28 22:25:48 +11:00
Andrew Tridgell
09500df4a8
AP_Scheduler: fixed example test to pass/fail
2024-02-28 19:22:14 +11:00
Andrew Tridgell
7226c5107d
AP_Schedule: fixed loop in example with sitl NULL
2024-02-28 19:22:14 +11:00
Andrew Tridgell
66ff84e6fb
AP_InertialSensor: fixed wait_for_sample() in examples
2024-02-28 19:22:14 +11:00
Andrew Tridgell
a74dab8c0a
HAL_SITL: don't run IO procs in examples
2024-02-28 19:22:14 +11:00
Andrew Tridgell
d0cec297a8
AP_JSON: made test pass/fail
2024-02-28 19:22:14 +11:00
Andrew Tridgell
39efe75e79
HAL_SITL: allow delay() and delay_microseconds() to work in examples
...
when we have no sitl object we need to directly call stop_clock()
2024-02-28 19:22:14 +11:00
Andrew Tridgell
e4c103972c
HAL_SITL: use NoVehicle for example tests and replay
...
allows for example runs without -C --model XXX
2024-02-28 19:22:14 +11:00
Andrew Tridgell
07f34a2f74
SITL: added NoVehicle
2024-02-28 19:22:14 +11:00
Andrew Tridgell
9ea8e61cfc
AP_Scripting: example showing how to use readstring method
...
a fairly common requirement for scripts
2024-02-28 19:05:58 +11:00
Randy Mackay
fb5df80932
AP_HAL_ChibiOS: AP_Periph does not use AP_VisualOdom
2024-02-28 18:52:37 +11:00
Randy Mackay
07cd050f63
AP_Scripting: EKF source switching for ExtNav and optflow
2024-02-28 18:52:37 +11:00
Randy Mackay
f2b66fd179
AP_Scripting: add VisualOdom bindings
2024-02-28 18:52:37 +11:00