Andrew Tridgell
25c576cad7
Copter: replaced constrain() with constrain_float()
2013-05-02 10:26:49 +10:00
Randy Mackay
0b29754920
Copter: simplify roll-pitch stabilize controller
...
remove check of whether to freeze i term when attitude is less than 5
degrees from horizontal. I terms have been moved to the rate
controllers.
2013-04-22 18:47:56 +09:00
Andrew Tridgell
c2c037ec0d
Copter: use the right constrain() type in Attitude code
...
Pair-Programmed-With: Randy Mackay <rmackay9@yahoo.com>
2013-04-22 13:26:49 +10:00
Randy Mackay
a9da3c9d3d
Copter: remove unused throttle functions
...
removed get_pilot_desired_acceleration vand get_pilot_desired_direct_alt
were used for initial testing of the inertial alt-hold controller but
are no longer required.
2013-04-21 23:43:04 +09:00
Randy Mackay
745df9b13c
Copter: add SONAR_GAIN to tune reaction to sonar
...
Some users report the response to sonar is too violent, this allows that
reaction to be reduced
2013-04-20 15:58:36 +09:00
Randy Mackay
50515e28e1
Copter: replace fabs with fabsf
2013-04-20 15:40:56 +09:00
Randy Mackay
f5955d8915
Copter: auto climb and descent params removed
...
These params now reside in the AC_WPNav library
2013-04-18 14:52:21 +09:00
Randy Mackay
1ee825ee9a
Copter: move alt and wp checking to AC_WPNAV
...
RTL fix so that if it starts rtl-ing from above 80m it returns home
while descending instead of descending at initial position.
add get and set_target_alt_for_reporting
2013-04-14 10:39:23 +09:00
Randy Mackay
7c559333f5
Copter: get_throttle_rate's target_speed a float
2013-04-14 10:38:51 +09:00
Randy Mackay
ee7f40cfe9
Copter: Leonard's alt-hold feed forward
2013-04-14 10:38:37 +09:00
Randy Mackay
f82ce449d7
AC_WPNav: add angle limits and set from AC's throttle controller
2013-04-14 10:38:34 +09:00
Randy Mackay
1516972eaa
Copter: add panorama to CIRCLE mode
...
Yaw will slowly rotate if CIRCLE_RADIUS is set to zero
Circle center is projected forward CIRCLE_RADIUS from current position
and heading
2013-04-14 10:38:01 +09:00
Randy Mackay
49828eba7d
Copter: integrate AC_WPNav
2013-04-14 10:37:48 +09:00
Randy Mackay
24dd167607
Copter: ACRO bug fix from Jason
2013-04-01 11:44:28 +09:00
Andrew Tridgell
b280857025
Copter: use common angle wrap code
2013-03-29 13:14:31 +11:00
Randy Mackay
fdcb78ccf7
Copter: leonard's smoother alt-hold transition
...
Target altitude when entering alt-hold is based on a projection from
current alt and climb rate
2013-03-17 13:24:49 +09:00
Randy Mackay
37040adfaa
Copter: bug fix for auto missions over 320m
...
get_throttle_althold_with_slew's target_alt parameter defined as int16_t
(instead of int32_t) meaning missions with altitudes >320m could wrap
around and become negative.
2013-03-17 11:14:35 +09:00
Randy Mackay
f9539384a1
Copter: rename failsafe to failsafe_radio
...
Makes way for separation of failsafes for throttle, gps and gcs
2013-03-16 17:14:21 +09:00
Randy Mackay
476a6d0164
Copter: fix for acro throttle bug
2013-03-02 10:28:44 +09:00
Randy Mackay
d8515ff85e
Compass: basic compensation for motor interference
2013-03-02 00:03:16 +09:00
Randy Mackay
df1c0d92bd
Copter: manual throttle scaling fix
...
Scaling of bottom half of throttle was changed from THR_MIN ~ 500.
Previously it was from 0 ~ 500.
2013-02-01 22:37:33 +09:00
Randy Mackay
a0b65a262b
Copter: use scaled throttle for accel-throttle's I term
...
Accel throttle's I term is taken from scaled manual throttle
2013-02-01 22:37:25 +09:00
Randy Mackay
06a71af12f
Copter: THR_MID used to scale manual throttle
2013-02-01 22:37:16 +09:00
Randy Mackay
aaecc25ac7
Copter: leonard's inav2
...
Moved loiter controller to navigation.pde
2013-01-25 15:16:35 +09:00
Randy Mackay
deafbf1f56
Copter: inav loiter comment changes
...
removed unused get_loiter_vel function
2013-01-24 11:14:38 +09:00
Randy Mackay
68fc9ac1d8
Copter: add "f" to end of float constants
...
This is a small performance improvement for the px4
2013-01-23 14:51:37 +09:00
Randy Mackay
9a09f086d2
Copter: Leonard Hall's inertial nav ver 2
2013-01-23 12:34:49 +09:00
rmackay9
ab1978ad50
Copter: Leonard Hall's inertial nav based loiter
2013-01-22 18:38:00 +09:00
James Bielman
5631f865b2
Update floating point calculations to use floats instead of doubles.
...
- Allows use of hardware floating point on the Cortex-M4.
- Added "f" suffix to floating point literals.
- Call floating point versions of stdlib math functions.
2013-01-16 13:52:01 +11:00
Randy Mackay
175f69a64f
ArduCopter: smooth throttle when switching from manual throttle to alt hold
...
new set_accel_throttle_I_from_pilot_throttle function copies the
difference between the pilot's throttle and hover throttle to the
accelerometer based throttle controller's I term.
2013-01-13 20:00:59 +11:00
rmackay9
21b6c78d12
ArduCopter: added get_throttle_althold_with_slew to allow slower altitude target changes
...
Improved surface tracking by using slewed althold controller
Reduced sonar mode filter to just 3 elements to reduce lag but at the possible consequence of allowing sonar noise to creep through for people with margin sonar set-ups.
2013-01-13 19:51:47 +11:00
Andrew Tridgell
860f4b2605
Copter: merge the latest 2.9 changes into master
2013-01-08 14:37:40 -08:00
Andrew Tridgell
ead38f917f
Copter: use GRAVITY_MSS
2013-01-02 14:45:08 +11:00
Andrew Tridgell
51d987a890
Copter: removed unusued variable
2013-01-02 09:55:55 +11:00
rmackay9
677b38a48e
ArduCopter: first implementation of surface tracking using sonar
...
Note: not yet enabled as part of any flight mode
2013-01-02 09:55:37 +11:00
rmackay9
daac540e08
ArduCopter: get_throttle_althold - add check to avoid divide by zero
2013-01-02 09:55:37 +11:00
rmackay9
576af6d487
ArduCopter: bug fix to althold desired rate calculation. Fix from Jonathan.
2013-01-02 09:55:37 +11:00
rmackay9
ff40fa6aab
ArduCopter: alt hold bug fix - should use 2x linear distance when calculating the desired rate
...
Bug fix from Leonard.
2013-01-02 09:55:37 +11:00
rmackay9
393c893cdb
ArduCopter: bug fix (attempt #2 ) for accel based throttle controller
...
Thanks to Jonathan for this.
2013-01-02 09:25:58 +11:00
rmackay9
e583ade62d
ArduCopter: bug fix to accel based throttle controller (was using m/s instead of cm/s)
2013-01-02 09:24:31 +11:00
rmackay9
e850ab7ccd
ArduCopter: add AUTO_VELZ_MIN, AUTO_VELZ_MAX and PILOT_VELZ_MAX to allow better control of climb/descent rate in auto and manual throttle modes
2013-01-02 09:24:31 +11:00
rmackay9
466097b383
ArduCopter: use inertial nav for current altitude and climb rate
2013-01-02 09:22:51 +11:00
rmackay9
7a5e4b8549
ArduCopter: stop unnecessary updates of target altitude and knock-on effect of too many EV message in dataflash log
2013-01-02 09:19:17 +11:00
rmackay9
ac8af9a53f
ArduCopter: Leonard Hall's changes to alt hold including adding low pass filter to climb rate
...
get_throttle_rate_stabilized changed to simply update the target altitude instead of talking directly to the rate controller.
get_throttle_althold changed to use sqrt of distance when calculating the desired rate towards the target altitude.
added reset of accel based throttle PID's I term.
unrelated small bug fix from Randy to allow CH6 tuning of throttle rate D term.
2013-01-02 09:19:17 +11:00
rmackay9
f4c50353b9
ArduCopter: allow tuning of the Throttle Rate D term
2013-01-02 09:16:48 +11:00
rmackay9
7ea34d4fb7
ArduCopter: updated accel based throttle to use ahrs's get_accel_ef method
...
Also removed slow low pass filter meant to correct for accelerometer calibration. This is no longer required now that we have the improved calibration method.
2013-01-02 09:11:25 +11:00
Pat Hickey
7af03127f6
ArduCopter: more work
2012-12-20 14:52:28 +11:00
rmackay9
af77425636
ArduCopter: fix Failed to Init Optflow message at startup
2012-12-11 00:09:45 +09:00
rmackay9
2f1b2b70e6
ArduCopter: added ACRO_TRAINER parameter to allow enabling/disabling the acro training function which will bring the roll back to within +- 45 degrees
2012-12-10 22:27:46 +09:00
rmackay9
154e3c33f7
ArduCopter, AP_InertialNav: consolidated ThirdOrderComplementaryFilter into AP_InertialNav to save about 200bytes of RAM
2012-12-10 00:43:11 +09:00