Andrew Tridgell
86b779f3c7
autotest: remove SIM_SERVO_SPEED from whitelist
2024-05-05 07:57:54 +10:00
Andrew Tridgell
1da50110d8
Tools: added Glider SITL model
2024-05-05 07:57:54 +10:00
Andrew Tridgell
53c0619a9a
SITL: added Glider SITL model
2024-05-05 07:57:54 +10:00
Andrew Tridgell
4370d2e348
HAL_SITL: added Glider SITL model
2024-05-05 07:57:54 +10:00
mateksys
af1ab61f78
AP_HAL_ChibiOS: update MatekH7A3 hwdef for 16MHz xtal
2024-05-04 20:52:50 +10:00
mateksys
a238e2995a
Tools: update MatekH7A3 bootloader for 16MHz xtal
2024-05-04 20:52:50 +10:00
Thomas Watson
0ca37387be
AP_Filesystem: guarantee load_file() data is null-terminated
...
Improves safety of use and clarity of users. Termination is not
included in the reported size to avoid changing user behavior or
misrepresenting the file contents.
2024-05-04 10:15:44 +10:00
Thomas Watson
a5764b7413
AP_ROMFS: clarify usage and null termination
...
Also remove the redundant insertion of the null terminator.
2024-05-04 10:15:44 +10:00
Andras Schaffer
2a218221f0
Plane: Fix metadata (increments) for changed params
...
Moving from centidegree to degree need adjusting the increments in the metadata (MP uses metadata to setup GUI)
2024-05-03 16:06:07 -07:00
Andrew Tridgell
e2767f899f
AP_Scripting: allow for 0x00 for 2nd checksum byte in INF_Inject driver
...
the device does send 0x00 sometimes and data is valid
2024-05-04 07:43:39 +10:00
Peter Barker
5a2b7c0ab2
Tools: build_options.py: add RPM DroneCAN
...
.... otherwise no board will compile without dronecan enabled - and some won't build that way
2024-05-03 22:59:18 +10:00
Peter Barker
2746a02187
Tools: build_options.py: note that HereFlow requires DroneCAN
2024-05-03 22:59:18 +10:00
Peter Barker
c8bcd35f94
Tools: build_options.py: note extended link stats requires MSP
2024-05-03 22:59:18 +10:00
Jacob Dahl
e5ea8f14f4
hwdef: ARKV6X: enable debug console
2024-05-02 15:16:33 -07:00
Jacob Dahl
9f5e837646
hwdef: ARKV6X: UART6 RC SBUS input
2024-05-02 15:16:33 -07:00
Andy Piper
946c891e14
autotest: improve reliability of MotorVibration test
2024-05-03 07:34:21 +10:00
Andy Piper
95c06d418e
autotest: tighten DynamicRpmNotches so that failure means failure
...
check notch attenuation at motor frequency
2024-05-03 07:34:21 +10:00
Andy Piper
f78eb58fb4
AP_InertialSensor: ensure that notches get updated while converging
2024-05-03 07:34:21 +10:00
Tom Pittenger
1fe7f6b099
Plane: refactor NAV_ALTITUDE_WAIT to AutoMode:: to match nav_delay()
2024-05-02 10:16:00 -07:00
Iampete1
410521afb8
DroneCAN: DSDL: add RPM message
2024-05-02 20:25:38 +10:00
Iampete1
982cc3a00f
AP_DroneCAN: call RPM subscribe
2024-05-02 20:25:38 +10:00
Iampete1
dff29a5015
AP_RPM: add DroneCAN backend
2024-05-02 20:25:38 +10:00
Iampete1
8cb368de0c
Tools: ardupilotwaf: boards: enable `HAL_PERIPH_ENABLE_RPM_STREAM` on `sitl_periph_universal`
2024-05-02 20:25:38 +10:00
Iampete1
23989bc569
AP_RPM: add DC_SEND_ID for periph RPM stream
2024-05-02 20:25:38 +10:00
Iampete1
6dcb0af697
AP_Periph: add support for streaming dedicated RPM message
2024-05-02 20:25:38 +10:00
Andrew Tridgell
45114d8b03
Tools: added serial playback tool
...
for playing back serial data captured by ArduPilot
2024-05-02 12:17:49 +10:00
Andrew Tridgell
c628e31c0a
AP_Scripting: fixed crc and added logging to INF_Inject driver
2024-05-02 12:17:49 +10:00
Andy Piper
30877cf11f
AP_InertialSensor: allow FIFO rate logging for hires sampling
2024-05-02 11:01:20 +10:00
Andy Piper
b1e7974453
AP_HAL_ChibiOS: add highres sampling to Pixhawk6X
2024-05-02 11:01:20 +10:00
haarshitgarg
4c95a3b6ef
Tools: enabled sending waypoints from a companion computer to ardupilot for copter and rover
...
Signed-off-by: Ryan Friedman <ryanfriedman5410+github@gmail.com>
2024-05-02 09:08:34 +09:00
haarshitgarg
7701be8209
Rover: enabled sending waypoints from a companion computer to ardupilot for copter and rover
...
Signed-off-by: Ryan Friedman <ryanfriedman5410+github@gmail.com>
2024-05-02 09:08:34 +09:00
haarshitgarg
a13639d9d8
ArduCopter: enabled sending waypoints from a companion computer to ardupilot for copter and rover
...
Signed-off-by: Ryan Friedman <ryanfriedman5410+github@gmail.com>
2024-05-02 09:08:34 +09:00
Andrew Tridgell
54d117b84b
Rover: update release notes
2024-05-01 17:24:10 +09:00
Andrew Tridgell
e417be0492
Copter: update release notes
2024-05-01 17:24:10 +09:00
Andrew Tridgell
891ee0ea4c
Tracker: update release notes
2024-05-01 17:24:10 +09:00
Randy Mackay
cc3bb402e4
Copter: 4.5.2-beta1 release notes
2024-05-01 17:24:10 +09:00
Randy Mackay
fc3cf3f1c3
Rover: 4.5.2-beta1 release notes
2024-05-01 17:24:10 +09:00
Randy Mackay
3078126927
Tracker: 4.5.2-beta1 release notes
2024-05-01 17:24:10 +09:00
Andrew Tridgell
1e69d5f92a
Plane: update release notes
2024-05-01 18:23:48 +10:00
Randy Mackay
63f4d2ad37
Plane: 4.5.2-beta1 release notes
2024-05-01 18:23:44 +10:00
Peter Barker
d1de760ee4
AP_Scripting: enable AP_Scheduler for CubeOrange-periph-heavy
...
... we use the scehduler in AP_Motors, which is compiled when making heavy-periph
2024-05-01 17:53:44 +10:00
Peter Barker
f44dd9605d
AP_HAL_ChibiOS: enable AP_Scheduler for CubeOrange-periph-heavy
...
... we use the scehduler in AP_Motors, which is compiled when making heavy-periph
2024-05-01 17:53:44 +10:00
Peter Barker
0d7925059c
ArduCopter: move handling of AP_Radio RC input down into AP_RCProtocol
2024-05-01 17:51:49 +10:00
Peter Barker
549411133b
GCS_MAVLink: move handling of AP_Radio RC input down into AP_RCProtocol
2024-05-01 17:51:49 +10:00
Peter Barker
f9c5c02f91
AP_RCProtocol: move handling of AP_Radio RC input down into AP_RCProtocol
2024-05-01 17:51:49 +10:00
Peter Barker
6f42556951
AP_Radio: move handling of AP_Radio RC input down into AP_RCProtocol
2024-05-01 17:51:49 +10:00
Peter Barker
f6bfd7cad3
AP_HAL: move handling of AP_Radio RC input down into AP_RCProtocol
2024-05-01 17:51:49 +10:00
Peter Barker
c521a5edfe
AP_HAL_ChibiOS: move handling of AP_Radio RC input down into AP_RCProtocol
2024-05-01 17:51:49 +10:00
Peter Barker
6d9a75b5ec
AP_BoardConfig: move handling of AP_Radio RC input down into AP_RCProtocol
2024-05-01 17:51:49 +10:00
Henry Wurzburg
c91fe8a44f
AP_Motors:explain PMWRange/Angle PWM types in metadata
2024-05-01 17:26:44 +10:00