Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
39,401 Commits 71 Branches 509 Tags 814 MiB
Commit Graph

328 Commits

Author SHA1 Message Date
Andrew Tridgell b3834457bd Plane: check airspeed and active Z controll for hover learning 2019-10-07 21:18:28 +11:00
Michael du Breuil 4f3762d8c2 Plane: Resore old default behaviour for throttle curves 
The change in this made QStabilize behave very differently then it had,
which is quite shocking in a test flight.
 2019-10-07 21:17:30 +11:00
Andrew Tridgell a9d441981b Plane: fixed height_above_ground() for case when rangefinder is below min 
this prevents a rangefinder that goes below min distance from causing
the calculations that depend on height above ground to fail
 2019-09-22 21:10:32 +10:00
Andrew Tridgell 7bf78a8741 Plane: prevent fwd motor from spinning up on ground in quadplane landing 
if the rangefinder starts to measure below it's min range then the fwd
motor can spin up.

Thanks to Josh for reporting this!
 2019-09-22 21:10:29 +10:00
Andrew Tridgell 7751352a86 Plane: implement VTOL landing for AFS termination 
this allows for vertical landing as an AFS_TERM_ACTION
 2019-09-12 09:59:17 +10:00
Mark Whitehorn 788e7a840c Plane: default angle_boost to disabled for tailsitters 2019-09-12 09:05:42 +10:00
Michael du Breuil 4f22dff14d Plane: Add an airspeed limit for quadplane takeoffs 2019-09-09 22:06:25 -06:00
Michael du Breuil 77afcf6a1b Plane: Abort takeoffs that take to long to complete 2019-09-09 22:06:25 -06:00
Henry Wurzburg 7178655cbe Plane: fixed landing after VTOL loiters 2019-09-10 08:57:13 +10:00
Leonard Hall 34da437266 Plane: support for upgrade to PID object 2019-07-25 17:38:15 +09:00
Leonard Hall 157f786adf Global: rename desired to target in PID info 2019-07-25 17:38:15 +09:00
Michael du Breuil 22598b1a4b Plane: Reduce inerital nav dependence 2019-07-16 12:11:42 +09:00
Hwurzburg 44f6f7335e Plane: Added Quadplane option for QRTL failsafe action 2019-07-05 11:25:56 +10:00
IamPete1 76663d66e8 Plane: support bicopter tiltrotors 2019-07-02 10:15:17 +10:00
1iggy2 220176f283 Plane: added octa I frame 2019-06-04 09:49:44 +09:00
Peter Barker 400aa53654 Plane: move arming-related functionality into parent classes 
Logging moves up
arming via mavlink moves up
arming via switch moves up
 2019-05-30 07:37:30 +09:00
Mark Whitehorn 34a1cf9528 Plane: move callback setup to QuadPlane::setup() 2019-05-08 10:28:42 +10:00
Mark Whitehorn aeaff72e14 Plane: fix acro stabilization check 2019-05-08 08:44:52 +10:00
Mark Whitehorn 4a7ce1b384 Plane: clean up qacro 2019-05-08 08:44:52 +10:00
Mark Whitehorn dd50d435ab Plane: limit bodyframe roll mode to tailsitters 2019-04-30 08:51:24 +10:00
Mark Whitehorn f054301ec2 Plane: add QACRO roll/pitch/yaw rate params 2019-04-23 09:46:38 +10:00
Mark Whitehorn 8bcf2439ad Plane: quadplane stabilize manual throttle midpoint and expo 
move throttle curve logic to AP_Math

use parameter THROTTLE_EXPO in get_pilot_throttle
 2019-04-23 09:46:38 +10:00
Mark Whitehorn b515431008 AP_Math: add expo and throttle_curve functions 2019-04-23 09:46:38 +10:00
Pierre Kancir 65b4ba0539 ArduPlane: use past_interval_finish_line and line_path_proportion from Location 2019-04-23 09:20:43 +10:00
Peter Barker f09822a400 Plane: adjust for desired spool state and spool state renames 2019-04-14 12:18:03 +09:00
Pierre Kancir d8990a002e Plane: update locations_are_same to same_latlon_as 2019-04-08 08:05:05 -07:00
Pierre Kancir 47141562c0 ArduPlane: use get_distance_NE instead of location_diff 2019-04-08 08:00:52 -07:00
Leonard Hall 2daa5ffb9e Plane: replace set_throttle_out_unstabilized 2019-04-08 09:42:21 +09:00
Tom Pittenger ade6281923 Plane: use #if ADVANCED_FAILSAFE == ENABLED just like Rover and Copter 2019-04-03 17:46:50 -07:00
Tom Pittenger 0270c57530 Plane: massive refactor and creation of Mode class 2019-04-02 16:28:52 +11:00
Mark Whitehorn e0765747e7 Plane: add new tailsitter bodyframe roll option 2019-03-26 14:50:37 +11:00
Mark Whitehorn 825055d736 Plane: add rate-only option for QACRO mode 2019-03-19 10:13:59 +11:00
Mark Whitehorn 6414f0e48e Plane: skip plane assignments in QACRO 2019-03-19 10:13:59 +11:00
Andrew Tridgell 2b6210d594 Plane: use WP height for height above ground in vtol landing 
this allows for landings above or below the takeoff height without
requiring the use of terrain data. It allows both the use of vfwd
motor for holding against wind, and the correct height for land final
descent rate
 2019-03-18 14:47:27 +11:00
Andrew Tridgell b4103d04cc Plane: never use vfwd motor if vtol motors shutdown 2019-03-18 13:38:41 +11:00
Andrew Tridgell 7908ad437e Plane: allow fwd motor to run in VTOL land hor positioning 
this fixes an issue with vtol landings below the takeoff point
 2019-03-18 13:38:41 +11:00
Peter Barker ca7566fff9 Plane: use enum class for ArmingMethod and ArmingRequired 2019-03-12 19:48:14 +11:00
Peter Barker cbb0bfb809 Plane: is_flying_vtol: if spool mode is shut down we are not flying 
The subsequent check for get_throttle passes if you switch from QHOVER
to MANUAL on the ground while armed.  get_throttle returns > 0.01 - but
the motors are shut down so no output occurs.
 2019-03-12 10:21:11 +11:00
Mark Whitehorn 4a6b97828f ArduPlane: add tailsitter input type TAILSITTER_INPUT_BF_ROLL 2019-03-06 15:48:51 +11:00
Mark Whitehorn 01d6f1d932 ArduPlane: add body-frame yaw mode for tailsitters 2019-03-06 15:48:51 +11:00
Mark Whitehorn 6e4a2b97f9 ArduPlane:add subclass for copter tailsitters 
cleanup and add tailsit_motmx
add constexpr and motor mask check
add support for tricopter tailsitter
don't call output_motor_mask unless armed
fix whitespace
 2019-03-06 07:53:46 +09:00
Mark Whitehorn 487ad7a90f Plane: add QACRO mode for quadplanes 
use acro_r/p/y_rate params in qacro
port ACRO throttle handling from copter

handle non-tailsitter controls
 2019-03-05 10:13:20 +11:00
IamPete1 f24c6785f2 Plane: add E-stop 2019-02-27 08:51:24 +09:00
Andrew Tridgell 136e10a781 Plane: handle VTOL landing with incorrect height 
if landing above expected height then run landing detector to allow a
switch from LAND_DESCEND to LAND_FINAL

this prevents the plane sitting on the ground until the battery runs
out
 2019-02-26 11:12:58 +11:00
Michael du Breuil b290148ed0 Plane: Don't overwrite the quadplane loiter relax 2019-02-23 11:08:21 +11:00
Michael du Breuil c15983c690 Plane: prevent loss of control when Q_ENABLE is set while flying 
Also rename check_throttle_suppression
 2019-02-21 21:38:03 -07:00
Michael du Breuil 25a2c77782 Plane: Fix not logging quadplane control, and over logging attitude control 2019-02-22 11:59:26 +11:00
Mark Whitehorn 95b3a5bacd ArduPlane: implement hover throttle learning for quadplanes 
disable by default
check quadplane.enable in update_hover_learn
 2019-02-16 19:04:13 -08:00
Mark Whitehorn b9f3118374 Plane: allow changing Q_TRIM_PITCH in flight 
change float comparison to is_equal
 2019-02-12 09:42:19 +11:00
Michael du Breuil df1632054e Plane: Update throttle mix 2019-02-05 11:05:54 +11:00